SERVICE MANUAL
HR-S8955EE
INSERT A.DUB
Regarding service information other than these sections, refer to the service manual No. 82923 (HR-S7955MS).
Also, be sure to note important safety precautions provided in the service manual.
This service manual is printed on 100% recycled paper.
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD
HR-S8955EE V15S25
September 2002
No.82944
TABLE OF CONTENTS
DIFFERENT TABLE ............................................................................................................................................................................................................1 only
5. PARTS LIST (5-1 to 5-11)
5.1 PACKING AND ACCESSOR Y ASSEMBL Y <M1> ..............................................................................................................................................5-1
5.2 ELECTRICAL PART LIST
MAIN BOARD ASSEMBLY<03> ........................................................................................................................................................................... 5-2
TERMINAL BOARD ASSEMBLY<06> ..................................................................................................................................................................5-9
The following table indicates main different points between models HR-S7955MS and HR-S8955EE.
ITEM
SATTELITE CONTROLLER OPTIONAL PROVIDED
SCART CABLE(21 pin) PROVIDED OPTIONAL
+1/2 DIGITAL SLOWMOTION NOT USED USED
SECAM RECORD USED NOT USED
3R PICTURE/TBC/FRAME MEMORY
FRONT INPUT TERMINAL SILVER GOLD
BROADCASTING STANDARD L, L’, B/G B/G, D/K
STEREO DECODER NICAM(L, B/G), A2(B/G) NICAM, A2
RF OUT NOT USED USED
VPS NOT USED USED
IR CODE A A,B
x1.5 PLAYBACK USED(without AUDIO) USED(with AUDIO)
MODEL
The following table indicates different parts number between models HR-S7955MS and HR-S8955EE.
PACKING AND ACCESSORY ASSEMBL Y<M1>
PACKING AND ACCESSORY ASSEMBLY<M1> is indicated on the parts list.
FINAL ASSEMBLY<M2>
REF
!
! 501 FRONT PANEL ASSY LP10427-019F LP10427-024B
ITEM
NO.
501A CASSETTE DOOR LP20961-007C LP20961-018B
529 KNOB ASSY LP31019-005C LP31019-005D
MODEL
MAIN BOARD ASSEMBLY<03>
REF
!
ITEM
NO.
PW1 MAIN BOARD ASSY LPA10170-03D LPA10170-05A
MODEL
2D D BOARD ASSEMBLY<05>, 3D DIGITAL/2M BOARD ASSEMBLY<05>
!
REF
ITEM
NO.
PW1
2D DIGITAL BOARD ASSY
PW1
3D DIGITAL/2M BOARD ASSY
MODEL
3D DIGITAL/2M board assembly of the HR-S8955EE is different from that of the
HR-S7955MS but it is the same as that of the HR-S7950EU.
For the Schematic diagram, please refer to the HR-S7950EU.
TERMINAL BOARD ASSEMBLY<06>
!
REF
ITEM
NO.
TERMINAL BOARD ASSY
PW1
MODEL
DEMOD BOARD ASSEMBLY<14>
REF
!
ITEM
NO.
PW1 DEMOD BOARD ASSY LPA10094-10B LPA10094-09A
C6714
CAPACITOR NCB21HK-682X NCB21HK-222X
C6716
CAPACITOR NCB21HK-682X NCB21HK-222X
C6724
E CAPACITOR QEKJ1HM-225 —
K6703
MG RESISTOR NRSA02J-0R0X NRSA02J-103X
K6705
MG RESISTOR NRSA02J-100X NRSA02J-0R0X
K6707
FERRATE BEADS NQR0200-003X —
MODEL
S JACK BOARD ASSEMBLY<36>
REF
!
Note: Mark — is not used.
ITEM
NO.
PW1 S JACK BOARD ASSY LPA20009-02B LPA20009-01B
J7102
S JACK QND0084-001 QND0085-001
MODEL
HR-S7955MS
NOT USED USED
HR-S7955MS HR-S8955EE
HR-S7955MS HR-S8955EE
HR-S7955MS HR-S8955EE
LPA10162-02C —
— LPA10105-07A
HR-S7955MS HR-S8955EE
LPA10138-09A LPA10138-10A
HR-S7955MS HR-S8955EE
HR-S7955MS HR-S8955EE
HR-S8955EE
1