JVC DR-MV5SE, DR-MV5BE User Manual

VHS/DVD
DVDVHS
REC
PR
DV IN
S-VIDEO VIDEO AUDIO
VHS DVDDUBBING
Filename [MV5S_01Cov1.fm]
LPT1092-001B
DR-MV5SE DR-MV5BE
EN
17
17
DVD VIDEO RECORDER & VIDEO CASSETTE RECORDER
INSTRUCTIONS
MV5S_00.book Page 1 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_02Safety.fm]
Masterpage:Left0
2 EN
Page 2 Wednesday, 31 August 2005 16:54
SAFETY FIRST
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Cassettes marked “VHS” (or “S-VHS”) can be used with this unit. However, S-VHS recording is not possible with this model.
This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS recordings in the SP mode with regular VHS resolution.
HQ VHS is compatible with existing VHS equipment.
SHOWVIEW is a trademark of Gemstar Development Corporation. The
SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing users only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Safety Precautions
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
IMPORTANT:
8 Please read the various precautions on pages 2 and 3 before
installing or operating the unit.
8 It should be noted that it may be unlawful to re-record pre-
recorded tapes, DVDs, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.
CAUTION:
8 When you are not using the unit for a long period of time, it is
recommended that you disconnect the power cord from the mains outlet.
8 Dangerous voltage inside. Refer internal servicing to qualified
service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.
MV5S_00.book Page 2 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 3
Filename [MV5S_02Safety.fm]
Page 3 Wednesday, 31 August 2005 16:54
SAFETY FIRST
When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.
Failure to heed the following precautions may result in damage to the unit, remote control or disc.
1. DO NOT
place the unit —
— in an environment prone to extreme temperatures or humidity. — in direct sunlight. — in a dusty environment. — in an environment where strong magnetic fields are generated. — on a surface that is unstable or subject to vibration.
2. DO NOT
block the unit’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT
place heavy objects on the unit or remote control.
4. DO NOT
place anything which might spill on top of the unit
or remote control.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
5. DO NOT
expose the apparatus to dripping or splashing.
6. DO NOT
use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.
7. DO NOT
place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID
violent shocks to the unit during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. In conditions where condensation may occur, disconnect the unit’s power plug from the wall and keep it disconnected for a few hours to let the moisture dry, then turn on the unit.
For Italy:
“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95”
The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “
!” shows ON.
A
TTENTION:
To mobile phone users:
Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display.
On placing the unit:
Some TVs or other appliances generate strong magnetic fields. Do not place such appliances on top of the unit as it may cause picture disturbance.
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page www.jvc-europe.com
to obtain information about the take-back
of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
Attention:
This symbol is only valid in the European Union.
MV5S_00.book Page 3 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
Filename [MV5S_03Contents.fm]
Page 4 Wednesday, 31 August 2005 16:54
Contents
Enjoying your life with D
V
Enjoying your life with DVD
r
Beautiful images
Easy dubbing
O
H
!
!
G
r
e
a
t
!
!
Beautif
u
Enjoy the vivid picture quality of DVD recording/playback.
With the simple operation, you can dub from DVD to tape or tape to DVD.
MV5S_00.book Page 4 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
Filename [MV5S_03Contents.fm]
Page 5 Wednesday, 31 August 2005 16:54
r life with DVD recorder
3 types of DVD discs
Comfortable playback
Beautiful!
CONTENTS
Read me first!
For your safety .................................... 2
About discs .......................................... 6
Index ................................................. 10
Are you ready?
Get over it!
– connections – .............. 15
Initial settings .................................... 17
Let’s enjoy...
Basic playback .............. 24
Basic recording .............. 26
Using timer ....................................... 29
All over dubbing ................................ 37
Advanced playback ........................... 47
Advanced recording .......................... 61
What’s navigation? ............................ 65
Arrange your style
1 remote control is good enough! ..... 74
For better sound ................................ 76
It can be more useful ......................... 78
Need help?
Tips for your trouble .......................... 91
Terms ................................................. 98
Choose the disc type for recording from DVD-RAM, DVD­RW and DVD-R.
Navigation function helps you to find the disc and programme you want to watch.
MV5S_00.book Page 5 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_04DiscInfo.fm]
Masterpage:Left0
6 EN
Page 6 Wednesday, 31 August 2005 16:55
DISC INFORMATION
Recordable/Playable Discs
You can use discs with the following logos for recording and playback.
The above table is based on the information as of April 2005.
Recording and playback may not be performed depending on the
characteristics and condition of the disc used, leading to unsatisfactory results. Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit.
DVD-RAM Discs
It is only possible to use discs which conform with DVD-RAM standard Version 2.0 or 2.1.
It is impossible to record on DVD-RAM discs which do not conform to this standard. If you use a disc formatted under a different standard version, format it on this unit before use.
It may not be possible to record, play back, edit or dub a DVD-RAM disc even if it conforms to the standard if it was recorded or edited on the devices from other manufacturers or on a PC, or if it has far too many titles, or if there is very little available capacity remaining on the disc.
DVD-RAM discs recorded on this unit cannot be played back on an incompatible DVD player.
It is possible to record copy-once programmes of digital broadcasts only onto 4.7/9.4 GB DVD-RAM discs (2.8 GB DVD-RAM discs are not compatible).
DVD-R/RW Discs
It is only possible to use DVD-R discs which conform with DVD-R standard Version 2.0. When a DVD-R/RW disc (Video mode) is finalised (pg. 90), it can be played back on a standard DVD player as a DVD VIDEO disc. When a DVD-RW disc (VR mode) is finalised (pg. 90), it can be played back on a standard DVD player compatible with the VR mode of DVD-RW discs.
Before finalising —
— it is possible to record on unrecorded areas of the disc, edit the disc title and programme titles, and delete programmes.
It is impossible to record or edit DVD-R/RW discs recorded on other devices even if they have not been finalised.
It is impossible to overwrite recorded areas of DVD-R discs.
Available recording capacity does not increase even if a recorded
programme is deleted from a DVD-R disc.
After finalising —
After a DVD-R/RW disc (Video mode) has been finalised, it is possible to play back the recorded programmes (video and/or audio) on a standard DVD video player as a DVD VIDEO disc.
Edited titles are displayed as the “DVD menu” in video mode.
It is impossible to record, edit or delete the data either in video mode or in VR mode.
Either in video mode or in VR mode, although the disc can be played back on DVD players from other manufacturers, sometimes it may not be possible to play back depending on the disc and recording conditions.
It is impossible to record on CD-R/RW or DVD-R discs used for authoring.
It is impossible to record onto DVD-R/RW (Video mode) discs broadcasts that allow you to copy once. The copy-once programmes can only be recorded onto DVD-RW discs formatted in VR mode.
NOTE:
The following may result if you play back a DVD-R disc recorded on another unit.
The disc does not play.
A mosaic pattern (block noise) appears on the screen.
Video or audio may be dropped out.
The unit stops during playback.
Discs For Playback Only
You can use discs with the following logos for playback only.
Playback may not be performed depending on the characteristics and condition of the disc used.
DTS Audio CDs can also be played back (An optional DTS decoder is required).
MP3 and JPEG discs can be played back on this unit only when they have been recorded in the ISO9660 or Joliet format and finalised.
JPEG files that can be played back on this unit must conform to JFIF/ Baseline process, and the maximum resolution of a JPEG file is 2,812 x 2,112 pixels.
CD-R/RW discs recorded in music CD format need to be finalised to play back on this unit.
Operation and audio quality of this unit are not guaranteed for discs that do not conform to the Compact Disc specification (CD-DA). Before you play back a CD, check for the CD logo and read the notes on the package to confirm that it conforms to the Compact Disc specification.
Depending on the intentions of the author of the software, recording conditions of DVD discs and Video CD discs may be restricted. Since this unit plays back discs according to the intentions of the author of the software as indicated on the disc, some functions may not operate as commanded.
When switching from the first layer to the second layer of double­layered DVD VIDEO discs, the image and sound may be momentarily distorted. This is not a malfunction.
About Discs
DVD-RAM
12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB Ver. 2.0/2x speed Ver. 2.1/1x – 2x speed
DVD- RW
12 cm: 4.7 GB/9.4 GB Ver. 1.1/1x – 2x speed (Video mode/VR mode)
DVD- R
12 cm: 4.7 GB 8 cm: 1.4 GB Ver. 2.0/1x – 4x speed (Video mode)
DVD VIDEO Video CD/Super Video CD
Audio CD
CD-DA files
CD-R
CD-DA/JPEG/ MP3 files
CD-RW
CD-DA/JPEG/ MP3 files
CD-ROM
JPEG/MP3 files
(example of region code indications)
MV5S_00.book Page 6 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 7
Filename [MV5S_04DiscInfo.fm]
DISC INFORMATION
Page 7 Wednesday, 31 August 2005 16:55
DVD-AUDIO discs compatible with DVD video players can be played.
Super Audio CDs (SACD) compatible with conventional CD players
can be played.
It is possible to play back finalised +R/+RW (Video mode only) discs. “DVD” lights on the front display panel when a +R/+RW disc is loaded. However, the use of +R double layer disc on this unit may not be recommended.
Unplayable Discs
The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms). If such discs are accidentally played back, it may cause noise that can lead to speaker damage.
CD-ROM discs (including PHOTO-CD and CD-G)
Discs recorded in Packet Write (UDF) format
1.3-GB double density CDs (DDCD)
High density CDs (HDCD)
The following discs also cannot be played back.
Discs of a region number other than “2”
DVD-RAM (2.6 GB/5.2 GB)
DVD-RAM (TYPE1)
Region Number
The world is divided into 6 regions for DVDVIDEO discs. DVDVIDEO discs are assigned a region number to indicate which region they may be played back in. A disc cannot be played back on this unit unless the region number of the disc matches that of the unit. The region number for this unit is “2”. Only discs whose region number includes “2” or “ALL” can be played back such as shown below.
Examples of DVD VIDEO labels which can be played back using this unit.
Marks of discs in this instruction manual
Recording Medium And Format
DVD-RAM
Recording and erasing can be performed as many times as possible on a disc.
Editing can be performed after recording, such as deleting unwanted parts.
While recording, it is possible not only to start playback of a programme currently being recorded, but also to watch another programme previously recorded.
DVD-RW (VR m ode)
Recording and erasing can be performed as many times as possible on a disc.
Editing can be performed after recording, such as deleting unwanted parts.
DVD-RW (Vid eo mod e)
Can be played back on other DVD players after finalising.
New recording can be performed by erasing all the data on a disc
once played back.
DVD-R
Can be played back on other DVD players after finalising.
Suitable when keeping a recorded disc for a long time.
File Structure Of Discs
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called “titles”. Each title has a number (title number) that can be used to select desired titles. Titles are further divided into units called “chapters”. Each chapter has a number (chapter number) that can also be used to select desired chapters. Note that some discs are not divided into titles and chapters.
When you record a programme on a DVD-RAM/RW (VR mode) disc
A single recording session results in a single title (a single chapter). However, chapter marks are automatically inserted when recording is paused, or audio changes from monaural or bilingual to stereo due to commercial breaks, etc. It is also possible to insert chapter marks at desired locations during playback. (墌 pg. 49)
When you record a programme on a DVD-R/RW (Video mode) disc
A single recording session results in a single title (a single chapter). However, chapter marks are automatically inserted when recording is paused, or audio changes due to commercial breaks, etc. It is also possible to insert chapter marks at desired locations during either recording or playback. Once the disc has been finalised, these chapter marks are deleted and new chapter marks are assigned automatically approximately every 5 minutes.
In Video mode, even before finalising, it is impossible to perform editing operations other than changing the disc name and/or title names and deleting programmes and/or titles.
After finalising, it is impossible to perform editing operations.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
Allows operation with a DVD-RAM disc.
Allows operation with a Video CD/Super Video CD (SVCD) disc.
Allows operation with a DVD-R disc.
Allows operation with an Audio CD disc.
Allows operation with a DVD-RW dis c.
Allows operation with a disc including MP3 files.
Allows operation with a DVDVIDEO disc.
Allows operation with a disc including JPEG files.
DVD-RAM, DVD-RW, DVD-R or DVD VIDEO disc
Title 1 Title 2
Chapter 1 Chapter 2
Chapter 3
Chapter 1
Chapter 2
Chapter 3
MV5S_00.book Page 7 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_04DiscInfo.fm]
Masterpage:Left+
8 EN
DISC INFORMATION
Page 8 Wednesday, 31 August 2005 16:55
Audio CD/Video CD/Super Video CD (SVCD)
Typically, Audio CD discs are divided into separate tracks each containing one song. Each track is assigned a number. For example, the third track is Track 3. The same is true for Video CD discs. However, some discs are not divided into tracks.
JPEG/MP3 Disc (CD-R/RW/ROM)
MP3/JPEG files put in directories nested in several levels on a disc will be organised as if they were put in single level directories (groups) by the MP3/JPEG Navigation of this unit. (墌 pg. 72)
File structure of a disc before starting the MP3/JPEG Navigation
File structure of the disc after starting the MP3/JPEG Navigation
Files are automatically grouped as follows and displayed on the MP3/JPEG Navigation screen. Data is displayed in the alphabetical order of file name. Files are grouped based on roots.
This unit can recognise up to 9 hierarchies including directories and files. Also, it can recognise up to 250 files in each group, and up to 99 groups on a disc.
NOTES:
Video CD discs that support Playback Control (PBC)
The contents of a disc are recorded into several hierarchies, and played back according to the instructions on the screen while navigating through the hierarchies. It is also possible to playback recorded tracks consecutively without activating the PBC function even when playing a PBC-compatible disc. (
pg. 50)
Regarding the contents recorded on discs
Some files may not be played back depending on the file types and other factors.
DVD VIDEO Marks
Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports.
Marks related to video
Marks related to audio
Audio CD or Video CD
Track 1 Track 2 Track 3 Track 4
Directory MP3 file JPEG file
Number of subtitles Number of angles
Recorded under the standard 4:3 aspect ratio
Screen includes black bands at the top and the bottom of image which has a standard 4:3 aspect ratio (letter box)
Video playback is in Wide video mode (16:9) on wide televisions, but in letter box on televisions with standard 4:3 aspect ratio.
Video playback is in Wide video mode (16:9) on wide televisions, but pan and scan is used on televisions with standard 4:3 aspect ratio (either the left or right side of the image is cut-out).
Number of audio tracks
Dolby Digital mark It has been developed by Dolby Laboratories as a digital surround system.
DTS (Digital Theater Systems) You can enjoy DTS audio if you connect an amplifier with a built-in DTS decoder to the [DIGITAL AUDIO OUT] connector of the unit.
MV5S_00.book Page 8 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 9
Filename [MV5S_04DiscInfo.fm]
DISC INFORMATION
Page 9 Wednesday, 31 August 2005 16:55
Placing A Disc
Opening the disc tray
Press x (OPEN/CLOSE) to open the disc tray.
Pressing the button again closes the disc tray.
Use the button to open and close the disc tray.
Do not block the disc tray with your hand while it is opening or closing
as this may result in hardware failure.
Do not place unplayable discs or any object other than a disc on the disc tray.
Do not press down strongly on the disc tray or place any heavy objects on it.
Discs without cartridges
Place the disc on the disc tray with the label side facing up. Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged. To insert an 8 cm disc, place it according to the inner groove.
DVD-RAM discs contained in cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down. If you insert the disc with “Side A” facing down, programmes are recorded on the side A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up.
Care And Handling Of Discs
How to handle discs
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesives on its surface.
Recording side
Make sure that discs are not scratched and dirty on the recording side before use. Scratches and dirt on the recording side of a disc may hinder proper playback and recording. Also be careful that a DVD-RAM disc may get scratched or dirt when removed from cartridge then put back in after use.
Storage
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the centre outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
R
E
M
A
I
N
R
E
C
M
O
D
E
S
L
O
W
<
<>
>
R
E
C
P
A
U
S
E
R
E
W
F
F
C
H
D
V
I
N R
E
C
L
I
N
K
D
V
D
D
V
D
D
V
D
V
C
R
D
U
B
P
U
L
L
-
O
P
E
N
CAUTION:
Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.) These symptoms are caused by the discs, not by the malfunction of the unit.
MV5S_00.book Page 9 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left0
10 EN
Page 10 Wednesday, 31 August 2005 16:55
INDEX
Front View
A Eject Button (x (EJECT)) pg. 25 B Cassette Loading Slot C VHS Lamp (VHS)
pg. 25
D DVD Lamp (DVD)
pg. 24
E Open/Close Button (x (OPEN/CLOSE))
pg. 9
F Reverse Search Button (3) (DVD deck)
pg. 47, 54
Rewind Button (3) (VHS deck)
pg. 59
G Forward Search Button (5) (DVD deck)
pg. 47, 54
Fast Forward Button (5) (VHS deck)
pg. 59
H Stop Button (8)
pg. 24, 25
I Disc Tray J Play Button (4) pg. 24, 25 K Pause Button (9)
pg. 24, 59
L Record Button (7)
pg. 26, 28
M Standby/On Button (STANDBY/ON 1) N S-video Input Connector (S-VIDEO) (DVD deck only)
pg. 42
O Video/Audio Input Connectors
(VIDEO/AUDIO ((MONO) L/R))
pg. 42
P Front Display Panel
pg. 14
Q Infrared Beam Receiving Window R VHS/DVD Select Button* (VHS/DVD)
pg. 24, 25
* This button will not function during navigation mode or set up mode.
S Dubbing Button (DUBBING) pg.38–40
Dubbing Direction Buttons (VHS]/}DVD )
pg. 37 –
40
T Channel Buttons (PR +/–)
pg. 26, 28, 41
U DV Input connector (DV IN (i*)) (DVD deck only)
pg. 41
* i (i.Link) refers to the IEEE1394-1995 industry specification and
extensions thereof. The i logo is used for products compliant with the i.Link standard.
Rear View
A Region Number Label pg. 7 B AC Power Cord
pg. 15
C Cooling Fan
This prevents the temperature from rising inside the unit. Do not remove it.
Install the unit so as not to block the area around the fan.
The cooling fan on the rear of the unit may be activated even if
the unit is turned off in the following cases;
— In the Automatic Satellite Programme Recording standby
mode (
pg. 36), slightly before the starting time of VPS/PDC
recording (
pg. 30)
— If you connect the decoder or the satellite receiver to the [L-2
IN/DECODER] connector and if “L-2 SELECT” is set to “DECODER” or “SAT VIDEO/RGB”. (pg. 44)
— “JUST CLOCK” is set to “ON” (pg. 88)
(Set “JUST CLOCK” to “OFF” if you mind the noise of the fan.)
D Audio Output Connectors (AUDIO OUTPUT (LEFT/
RIGHT))
pg. 16, 43
E Component Video Output Connectors (COMPONENT
VIDEO OUT) (DVD deck only)
pg. 16
This component video output enables you to watch the images on
the VHS deck in Progressive scan mode, refer to “VHS Progressive Scan” (pg. 60).
F L-1 Input/Output Connector (L-1 IN/OUT) pg. 15, 43,
76, 77
G Antenna Input Connector (ANTENNA IN) pg. 15 H Digital Audio Output Connector
(DIGITAL AUDIO OUT (COAXIAL)) (DVD deck only)
pg. 46, 77
I L-2 Input/Decoder Connector (L-2 IN/DECODER)
pg. 43, 76, 77
J Antenna Output Connector (ANTENNA OUT)
pg. 15
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
M
C
D
FEGHIJ
K LBA
NPQRSUO
T
To access covered connectors, push and open the connector cover.
STANDBY/ON
S-VIDEO VIDEO AUDIO
PUSH-OPEN
ACEB
F
G
D
JIH
MV5S_00.book Page 10 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 11
Filename [MV5S_05Name.fm]
INDEX
Page 11 Wednesday, 31 August 2005 16:55
Remote Control
A Open/Close Button (x (OPEN/CLOSE)) pg. 9, 24 B Eject Button (x (EJECT))
pg. 25
C VHS Button*
pg. 25
* This button will not function during navigation mode or set up mode.
D DVD Button* pg. 24
* This button will not function during navigation mode or set up mode.
E Number Buttons pg. 26, 28, 29, 67 F Cancel Button (CANCEL)
pg. 58
Counter Reset Button (0000)
pg. 63
G Auxiliary Button (AUX) H SHOWVIEW Button pg. 29 I Programming Button (PROG)
pg. 31, 32, 34
J Top Menu Button (TOP MENU)
pg. 47
K rt w e Buttons
pg. 20
L Menu Button (MENU)
pg. 47
M Reverse Skip Button (2)
pg. 47, 49, 54
Previous Button
pg. 50
N Reverse Search Button (3) (DVD deck)
pg. 47, 54
Rewind Button (3) (VHS deck)
pg. 59
Reverse Slow Button (SLOW –)
pg. 48
O Record Button (7)
pg. 26, 28
P Recording Mode Button (REC MODE)
pg. 26, 28
Remain Button (REMAIN)
pg. 49, 61
Q On-Screen Button (ON SCREEN)
pg. 12, 13, 55
R Display Button (DISPLAY)
pg. 49, 61
S Audio Button (AUDIO)
pg. 50
T Subtitle Button (SUBTITLE)
pg. 49
U TV/DVD Switch
pg. 20
V DVD Standby/On Button (DVD STANDBY/ON 1) W TV Standby/On Button (TV STANDBY/ON 1) pg. 75 X TV/Video Input Button (TV/VIDEO)
pg. 61, 63
Y TV Volume Buttons (TV % +/–)
pg. 75
Z Channel Buttons (PR +/–)
pg. 26, 28, 41
Page Buttons
pg. 66, 70, 71
a Memo Button (MEMO)
pg. 66, 70
Mark Button (MARK)
pg. 49
b Timer Button (TIMER #)
pg. 29, 31, 32
c Automatic Satellite Programme Recording Button (SAT
#) pg. 36
d Navigation Button (NAVIGATION)
pg. 65
e Enter Button (ENTER)
pg. 20
f Return Button (RETURN)
pg. 29, 57
g Forward Skip Button (6)
pg. 47, 49, 54
Next Button
pg. 50
h Forward Search Button (5) (DVD deck)
pg. 47, 54
Fast Forward Button (5) (VHS deck)
pg. 59
Forward Slow Button (SLOW +)
pg. 48
i Play Button (4)
pg. 24, 25
j Pause Button (9)
pg. 24, 59
k Stop Button (8)
pg. 24, 25
Clear Button (CLEAR
) pg. 58
l Skip Search Button ( )
pg. 48, 54
m Angle Button (ANGLE) (DVD deck only)
pg. 49
Live Check Button (LIVE CHECK)
pg. 54
n One Touch Replay Button ( )
pg. 54
o Set Up Button (SET UP)
pg. 20
p Progressive Scan Button (PROGRESSIVE SCAN)
pg. 60, 80
d
f g
U V
Y
W
Z
C
A
D
E
h
e
i j k
m
l
o p
n
T
S
F
B
X
c
b
I
H
K
L
M N
J
Q R
P
O
a
G
How To Use
The remote control can operate most of your unit’s functions, as well as basic functions of TV sets of JVC and other brands. (pg. 74)
Point the remote control toward the receiving window.
The maximum operating distance of the remote control is about
8m.
NOTES:
When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
If the remote control doesn’t work properly, remove its batteries, wait for approximately 5 minutes, replace the batteries and then try operating the unit again.
MV5S_00.book Page 11 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left+
12 EN
INDEX
Page 12 Wednesday, 31 August 2005 16:55
On-Screen Display (DVD deck)
When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice.
When playing back a recorded title
A Disc type B Audio mode C Current status (playback) D Playback title number E Playback chapter number F Current playback point G Elapsed playing time
When recording
A Disc type B Recording mode C Current time D Recording point E Current status (recording) F Elapsed recording time G Audio mode H Recording channel number
When pressing REC MODE
(Appears for eight seconds.)
A Recording mode B Remaining disc time for each recording speed
During Instant Timer Recording (ITR)
A Record remaining time
When using Live Memory playback
A Disc type B Current time C Bar meter for recording/playback D Recording mode E Current playback time/Elapsed recording time F Audio mode G Recording channel number
DV Dubbing When capturing images from the external DV equipment
A Disc type B Current time C Current recording point D Current status (recording) E Elapsed recording time F Sound mode G Recording channel (DV input)
DV Dubbing Controller
A Displays when remote control is set to DV control mode. B Auto capture button C Sound monitor switch
LPCM 2ch
0:01:08
DVD-VIDEO
TITLE1
EACH
CHAPTER1
A CB D E
F G
0:01:23
DVD-RW/VR
TITLE14
EACH
CHAPTER1
SP
18:04
PR 95
STEREO
A B C
D E HF G
XP:
SP:
LP : EP: FR:
1:00
2:00
4:01 6:03 2:31 (FR150)
AB
REC QUALITY
RECORDABLE TIME
0:13
TITLE13
ITR
CHAPTER1
SP
A
0:13:34
DVD-RAM
TITLE2TITLE2 0:12:27
EACH
CHAPTER1
LP
18:36
PR 10
STEREO
A B
C
D GE F
0:00:00
DVD-RW/VR
TITLE12
EACH
CHAPTER--
SP
--:-­DV
LR
A B
C
D GE F
DV
1 2
AB C
DV
DV DUBBING
AUDIO 1
MV5S_00.book Page 12 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 13
Filename [MV5S_05Name.fm]
INDEX
Page 13 Wednesday, 31 August 2005 16:55
On-Screen Display (VHS deck)
When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice.
A Operation Mode Indicators B Tape Speed (SP/LP) C Tape Direction D Index Mark Indicator (MARK)
pg. 28
E Counter Display F Tape Remaining Time Indicator
pg. 64
G Audio Mode Display
pg. 60
H Tape Position Indicator
The tape position indicator appears on the TV screen when you press 3 or 5 from the Stop mode or perform an Index Search. (pg. 59) The position of “q” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.
NOTE:
Depending on the type of tape being used, the tape position indicator may not appear correctly.
I VPS/PDC Indicator pg. 30 J Type of Broadcast
pg. 64
K Current Day/Month/Year L Clock Display M Channel Position Number and Station Name/Auxiliary
Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT VIDEO/RGB” (pg. 45), “SAT”
appears instead of “L-2”.
N “Cassette Loaded” Mark
Beginning End
MV5S_00.book Page 13 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left+
14 EN
INDEX
Page 14 Wednesday, 31 August 2005 16:55
Front Display Panel
A Video Indicator ( )
Lights when video mode is selected by pressing TV/VIDEO.
B Disc Type Indicator
When a disc is loaded, the type of the disc is indicated.
Disc Status Indicator
When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback. While recording/dubbing: Inner red ring lights. During Timer
Recording, inner red ring slowly
blinks. While playing back: Outside ring lights. While paused: Disc marks blink when either
recording or playing back. While stopped: Disc marks all light. While resume stopped: Disc marks all blink. While the disc tray opened: Disc marks all light out. No disc on the disc tray: Disc marks all light out.
VR Mode Indicator (VR) pg. 7, 89
Lights when a DVD-RW disc is formatted in VR mode.
C VPS/PDC Indicator pg.29–30 D Linear PCM Indicator (LPCM)
Lights when “XP MODE REC AUDIO” is set to “LINEAR PCM” (pg. 79) for recording with DVD-RAM, DVD-R and DVD-RW discs, and when Linear PCM audio is played.
E Cassette Loaded Mark ( )
Indicates the present of a cassette in the VHS deck. Lights when a cassette is loaded into the VHS deck. Blinks when the end of the tape has been reached during timer recording, or when the unit is in timer recording standby mode with a cassette without record safety tab inserted.
F VHS Timer Indicator ( )
Lights when the VHS deck is in the timer recording standby mode or when timer recording is in progress. Blinks rapidly when TIMER# is pressed under the following conditions:
Clock is not set.
Timer programming has not been set.
Cassette is not loaded.
Timer recording standby mode with a cassette without safety tab
inserted.
Tape end is reached during time recording.
G Recording Mode Indicator (XP/SP/LP/EP/FR) pg. 27
Blinks when recording mode is being set. While “FR” lights up, the left 3 digits of the Multi Display (Q R) indicate setting values ranging from “60” to “480”. After the value has been set, only “FR” lights.
H Group/Title Indicator (GRP/TITLE)
“GRP” or “TITLE” lights depending on a disc loaded while the left 2 digits of the Multi Display (Q) indicate the numbers explained below. “GRP”: Total number of groups or group number being played
back are displayed on the Multi Display.
“TITLE”: Total number of titles or title number being played back
are displayed on the Multi Display.
I Channel/Recording Mode Indicator
Indicates the channel received. Or the recording mode (SP, LP) of the VHS deck. (pg. 28)
J Track/Chapter Indicator (TRK/CHAP)
“TRK” or “CHAP” lights depending on a disc loaded while the 3rd and 4th digits from the left of the Multi Display (R) indicate the numbers explained below. “TRK”: Total number of tracks or track number being played
back are displayed on the Multi Display.
“CHAP”: Chapter number being played back are displayed on the
Multi Display.
K Random/Programme Playback Mode Indicator (RND/
PRGM)
pg. 58
“RND”: Lights when Random Playback mode is set. “PRGM”: Lights when Programme Playback mode is set.
L Repeat Mode Indicator ( /1/A–B) pg. 56
Select Repeat Playback mode on the on-screen bar. “ ”: Whole disc is played back repeatedly.
1”: A single title/chapter/track is played back repeatedly. “ A–B”: The selected part (A–B) is played back repeatedly. No display: Repeat Playback mode is off.
M Indicator pg. 32
Lights when a disc set up for On-Disc Timer Programming is loaded.
N DVD Timer Indicator ( )
Lights when the DVD deck is in the timer recording standby mode or when timer recording is in progress. Blinks when rapidly when TIMER# is pressed under the following conditions:
Clock is not set.
Timer programming has not been set.
Disc is not loaded.
Timer recording standby mode with a non recordable disc.
O VHS Indicator pg. 25
Lights when VHS mode has been selected, during recording or when tapes recorded in VHS format are played back.
P Video Output Indicator ( ) pg. 80
No display: Indicates that interlace mode is engaged.
: Indicates that progressive mode is engaged. (Example) lights when video output mode is in progressive mode.
Q Group/Title Number Display R Track/Chapter Number Display S Remaining Time/Elapsed Time Indicator
pg. 49, 61
Lights when remaining time of DVD-RAM, DVD-R and DVD-RW discs is displayed, and lights out when elapsed time is displayed. The right 6 digits of the Multi Display (T) indicate elapsed or remaining time of each track. No display: Indicates elapsed time of the disc. Displayed: Indicates remaining time of the disc.
T Remaining Time/Elapsed Time Display pg. 49, 61 U Multi Display
Displays clock, received channel, elapsed time, and remaining time. Also displays status of the unit (NO DISC/OPEN/CLOSE/ READING).
VHS DVDVR-
RAM
LPCM FR XP SP LP EP +
-
RW VCD
AB GF M NC D EIHJ
O
KL
PQ
RS T U
MV5S_00.book Page 14 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
EN 15
Filename [MV5S_05Name.fm]
Page 15 Wednesday, 31 August 2005 16:55
GET OVER IT! – CONNECTIONS –
It’s essential that your unit be properly connected.
1 Make sure the package contains all of the
accessories listed in “SPECIFICATIONS” on page 95.
2 Place the unit on a stable, horizontal surface. 3 Connect the unit to a TV depending on the TV and
cables you use.
● (墌 pg. 15, “Composite Connection”)
● (墌 pg. 16, “Component Video Connection (DVD deck only)”)
Composite Connection
1 Disconnect the TV aerial cable from the TV. 2 Connect the TV aerial cable to the [ANTENNA IN]
connector on the rear panel of the unit.
3 Connect the [ANTENNA OUT] connector on the rear
panel of the unit and the TV’s aerial connector with the provided RF cable.
4 Connect the [L-1 IN/OUT] connector on the rear
panel of the unit and the TV’s 21-pin SCART connector with a provided 21-pin SCART cable.
The [L-1 IN/OUT] connector accepts and delivers either a composite signal (regular video signal), Y/C signal or RGB signal.
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.
Select an appropriate option of “L-1 OUTPUT” as follows (
pg. 44):
5 Plug the end of the AC power cord into an AC outlet.
“LOADING” blinks on the front display panel when the AC plug of the power cord is connected into a AC outlet and no operation will be done for approximately 50 seconds. This is not a malfunction.
Connections
A
TTENTION:
Your TV must have a 21-pin AV input connector (SCART) for the connection to the unit.
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
RF cable
(provided)
Back of unit
Back of TV
TV aerial cable
21-pin SCART connector
21-pin SCART cable (provided)
AC power cord
ANTENNA IN
L-1 IN/OUT
ANTENNA OUT
AC outlet
Aerial connector
When your TV’s SCART connector accepts:
Set “L-1 OUTPUT” to:
Composite video signals “SCART VIDEO” Y/C signal (separated
luminance (brightness) and chrominance (colour) signals)
“SCART S-VIDEO”
RGB signal “SCART RGB”
After connection is completed, perform “Auto Set Up” on page 17.
MV5S_00.book Page 15 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left+
16 EN
GET OVER IT! – CONNECTIONS –
Page 16 Wednesday, 31 August 2005 16:55
Component Video Connection (DVD deck only)
1 Perform 1 – 3 in “Composite Connection”
(pg. 15).
2 Connect the unit’s [COMPONENT VIDEO OUT]
connectors to the TV’s component video input connectors.
3 Connect the unit’s [AUDIO OUT] connectors to the
TV’s AUDIO input connectors.
You can obtain high-quality component video pictures.
If your TV is not stereo-capable, use the unit’s [AUDIO
OUT] connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.
By using the component video connection, you can view the images in the progressive mode. For switching to the progressive mode, refer to “Scan Mode Set” (
pg. 80).
4 Plug the end of the AC power cord into an AC outlet.
“LOADING” blinks on the front display panel when the AC plug of the power cord is connected into an AC outlet and no operation will be done for approximately 50 seconds. This is not a malfunction.
RF cable
(provided)
Back of unit
Back of TV
TV aerial cable
ANTENNA IN
AC power cord
Aerial connector
AC outlet
Component video input connectors
Component video cable (not provided)
COMPONENT VIDEO OUT
ANTENNA OUT
A
TTENTION:
Your TV also must have a component video input connectors for the connection to the unit.
After connection is completed, perform “Auto Set Up” on page 17.
MV5S_00.book Page 16 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
EN 17
Filename [MV5S_05Name.fm]
Page 17 Wednesday, 31 August 2005 16:55
INITIAL SETTINGS
Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set
1 Press 1 to turn on the unit. The Country Set display appears
on the TV screen.
2 Press rt w e to select your
country’s name, then press ENTER. The Language Set display appears on the TV screen.
NOTES:
If you have selected BELGIUM or SUISSE, go to step 3.
If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN, press ENTER. The Clock Set screen appears. Set the clock manually (pg. 88), then go to step 4.
If you have selected any other country name, go to step 4.
3 Press rt w e to select the
language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen.
4 Press rt to select “AUTO
SET”, then press ENTER. The AUTO SET screen will appear, and the unit automatically performs Auto Channel Set.
When Auto Channel Set is completed, “PLEASE WAIT” will be displayed for about 90 seconds, since channel data is exchanged between the DVD deck and the VHS deck. No operation will be done during this time.
A
TTENTION:
When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (pg. 15) and the TV is turned on, the unit automatically performs the Preset Download (pg. 18) even if you select “AUTO SET” for Auto Set Up function.
NOTES:
In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step 1.
Auto Clock Set may not function properly depending on the reception condition.
If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. (pg. 87, “INFORMATION”)
Auto Set Up
After the 1 button on the unit or remote control is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Program numbers automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic (
C
ESKÁ REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe (OTHER EASTERN), set the clock manually.
Before starting, make sure of the following:
The TV aerial cable should be connected to the unit.
The unit’s AC power cord should be connected to a AC outlet.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
ENTER
DVD
VHS
SET UP
INITIAL SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
INITIAL SET UP / COUNTRY SET
EXIT
OK
SELECT
SET UP
A
TTENTION:
Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on. If you have moved to a different area, perform each setting as required.
Tuner setting (墌 pg. 84)
Clock setting (pg. 88)
If a new station starts broadcasting in your area, perform tuner setting. (pg. 84)
After “Auto Set Up” is completed, perform “Monitor Set (DVD Deck Only)” on page 21.
INITIAL SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
OK
SELECT
SET UP
ENGLISH
INITIAL SET UP / LANGUAGE SET
DEUTSCH FRANCAIS ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA NORSK
SUOMI DANSK
EXIT
SELECT WITH [CURSORS] THEN PRESS [ENTER]
OK
SELECT
SET UP
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
EXIT
SELECT WITH [CURSORS] THEN PRESS [ENTER]
OK
SELECT
SET UP
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
AUTO SET
PLEASE WAIT...
CANCEL
EXIT
MV5S_00.book Page 17 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left+
18 EN
INITIAL SETTINGS
Page 18 Wednesday, 31 August 2005 16:55
Auto Channel Set By Downloading From TV/Auto Clock Set/Auto Guide Program Number Set
If you have connected the unit to your TV via a 21-pin SCART cable (pg. 15), the unit will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 17. After downloading, the unit sets the clock and Guide Program numbers automatically.
1 Press rt to select “T-V LINK” and press ENTER. The T-V
LINK screen will appear, and the unit automatically performs Auto Channel Set.
When Auto Channel Set is completed, “PLEASE WAIT” will be displayed for about 90 seconds, since channel data is exchanged between the DVD deck and the VHS deck. No operation will be done during this time.
A
TTENTION:
Preset positions on the front display panel increase from “PR 1”; do NOT press any button on the unit or remote control until the front display panel shows clock time, “PR 1” or “–
–:– –” as illustrated on page 19.
NOTES:
For details, refer to the instruction manual of your TV.
In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or SET UP while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning.
Auto Clock Set may not function properly depending on the reception condition.
On this unit, the characters available for station names (ID) are A–Z, 0–9, –, f, + and I (space). Some names of downloaded stations may differ from those of your TV. (pg. 87)
Preset Download
A
TTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.
ENTER
DVD
VHS
SET UP
Slide the TV/DVD switch to DVD.
Perform steps 1 to 3 of “Auto Set Up” (墌 pg. 17) before continuing.
After “Preset Download” is completed, perform “Monitor Set (DVD Deck Only)” on page 21.
INITIAL SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
OK
SELECT
SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
EXIT
INITIAL SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
OK
SELECT
SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
PLEASE WAIT...
EXIT
MV5S_00.book Page 18 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 19
Filename [MV5S_05Name.fm]
INITIAL SETTINGS
Page 19 Wednesday, 31 August 2005 16:55
Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.
Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s).
If station names (ID – pg. 97) have also been stored in the unit’s memory, the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 85 – 87.
If Auto Channel Set has succeeded but Auto Clock Set has not, “PR 1” (channel position) is displayed. OR If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.
A Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s).
If station names (ID – pg. 97) have also been stored in the unit’s memory, the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 85 – 87.
B Perform “Clock Set” on page 88.
A
TTENTION:
After making sure the cables are connected properly, turn off the unit’s power once, then turn the unit’s power back on again. The Country Set display appears on the TV screen; perform “Auto Set Up” on page 17 or “Preset Download” on page 18 again.
IMPORTANT:
To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming. (pg. 29)
In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the unit will record a TV programme of a different station. When programming the timer using the S
HOWVIEW system, be sure to
check the desired channel is selected correctly. (
pg. 29)
Your unit memorises all detected stations even if reception of some of
them is poor. You can delete those stations with an unacceptable picture. (pg. 86, “Delete A Channel”)
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on­screen display depending on the Country setting you have made in step 2 on page 17 (unless you have selected BELGIUM or SUISSE), as shown below.
If you want to change the language setting manually, see “On­screen Language Set (DVD Deck Only)” on page 20.
Just Clock
Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”. (pg. 88)
T-V Link Functions (DVD Deck Only)
When you connect the unit to your TV via a fully-wired 21-pin SCART cable (pg. 15), the following functions are available. You can use these functions only with a TV offering T-V Link, etc.* For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically whenever you start playback. For details, refer to the instruction manual of your TV.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit. For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to “ON”. (pg. 79)
SUOMI
]
SUOMI ITALIA
]
ITALIANO
PORTUGAL
]
ENGLISH MAGYARORSZÁG]ENGLISH
DEUTSCHLAND
]
DEUTSCH ESPAÑA
]
CASTELLANO
POLSKA
]
ENGLISH NEDERLAND
]
NEDERLANDS
NORGE
]
NORSK GREECE
]
ENGLISH
SVERIGE
]
SVENSKA
OTHER WESTERN EUROPE
]
ENGLISH
DANMARK
]
DANS K
ÖSTERREICH
]
DEUTSCH
OTHER EASTERN EUROPE
]
ENGLISH
C
ESKÁ REPUBLIKA]ENGLISH
MV5S_00.book Page 19 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_05Name.fm]
Masterpage:Left+
20 EN
INITIAL SETTINGS
Page 20 Wednesday, 31 August 2005 16:55
On-screen Language Set (DVD Deck Only)
This unit offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically (pg. 19), you can change the language setting manually as required.
1 Press SET UP to access the Main Menu screen. 2 Press we to select “FUNCTION SET UP”, then press t. 3 Press we to select “DISPLAY
SET”, then press t.
4 Press rt to select “ON
SCREEN LANGUAGE”, then press ENTER.
5 Press rt to select your
desired language, then press ENTER.
6 Press SET UP to complete the setting.
NOTE:
It is not possible to select language of the on-screen display for the VHS deck.
Menu/Audio/Subtitle Language Set (DVD Deck Only)
Some DVD discs contain the DVD menu display, audio and subtitles in multiple languages. With these discs, you can set the default language as you like.
The procedure shows how to set “MENU LANGUAGE” as an example.
1 Press DVD so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen. 3 Press we to select “DVD SET UP”, then press t. 4 Press we to select
“LANGUAGE SET”, then press t.
5 Press rt to select “MENU
LANGUAGE”, then press ENTER.
6 Press rt to select your
desired language, then press ENTER.
See “Language Code List” (pg. 96).
7 Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc’s default menu language is played back.
Language
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
ENTER
DVD
VHS
SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
SUPERIMPOSE GREY/BLUE BACK DIMMER
DISPLAY SET
POWER SAVE ON SCREEN LANGUAGE
AUTO
ON
BRIGHT
OFF
ENGLISH
SELECT WITH [CURSORS] THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
MENU LANGUAGE AUDIO LANGUAGE
LANGUAGE SET
ENGLISH
AUDIO OUTPUT
UTILITY
SUBTITLE OFF
ENGLISH
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
MV5S_00.book Page 20 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 21
Filename [MV5S_05Name.fm]
INITIAL SETTINGS
Page 21 Wednesday, 31 August 2005 16:55
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs.
1 Press SET UP to access the Main Menu screen. 2 Press we to select “FUNCTION SET UP”, then press t. 3 Press we to select “VIDEO
IN/OUT”, then press t.
4 Press rt to select
“MONITOR TYPE”, then press ENTER.
5 Press rt to select the desired
option, then press ENTER.
6 Press SET UP to complete the
setting.
*The boldface settings below indicate the settings at your
purchase.
8 MONITOR TYPE — 4:3 LB / 4:3 PS / 16:9 AUTO / 16:9 FIX
4:3 LB (Letter Box conversion): Select this when the aspect ratio of
your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
4:3 PS (Pan&Scan): Select this when the aspect ratio of your TV is
4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.
16:9 AUTO (Wide television conversion): Select this when the
aspect ratio of your TV is 16:9 (wide TV).
16:9 FIX (Wide television conversion): Select this when the aspect
ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” (PS) and “Letter Box” (LB).
Pan&Scan
The right and left side of the image are cut off. The image fills the screen.
The picture will be shown in the “4:3 LB” mode depending on the disc even if the “4:3 PS” mode is selected.
Letter Box
Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio.
Monitor Set (DVD Deck Only)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
ENTER
DVD
VHS
SET UP
SELECT WITH [CURSORS] THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
MONITOR TYPE F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT L-2 SELECT
4:3LB VIDEO
VIDEO
SCART VIDEO
VIDEO/RGB
MV5S_00.book Page 21 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_06TocOperation.fm]
Masterpage:Left0
Page 22 Wednesday, 31 August 2005 16:55
Playback
DVD .............................................................................................................................. 24
Playback of the programme being recorded (Live Memory playback).......................51
How to search and manage the DVD titles (Navigation) .......................................... 65
VHS............................................................................................................................... 25
Recording
DVD ............................................................ 26
About recording mode............................ 27
VHS ............................................................. 28
About recording mode............................ 28
hat do you
w
MV5S_00.book Page 22 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
Filename [MV5S_06TocOperation.fm]
Page 23 Wednesday, 31 August 2005 16:55
Timer recording
Using SHOWVIEW number ........................................ 29
Setting timer manually............................................. 31
How to record a satellite programme ...................... 36
Dubbing
From VHS to DVD .................................................................................................. 37
From DVD to VHS .................................................................................................. 39
Dubbing from a digital equipment like a camcorder............................................... 41
want to do?
MV5S_00.book Page 23 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_07Basic PlayRec.fm]
Masterpage:Left0
24 EN
Page 24Wednesday, 31 August 2005 16:55
BASIC PLAYBACK
To play back an MP3/JPEG disc, see “Playback With MP3/ JPEG Navigation” (
pg. 72).
1
Load a disc.
For details, refer to “Placing A Disc” (pg. 9).
Playback begins automatically if an auto-playback DVD
disc is loaded.
2
Press VHS/DVD on the unit repeatedly or DVD on the remote control so that the DVD lamp lights up on the unit.
3
Press 4 to start playback.
If you load a DVD disc whose region code does not match the unit, “REGION CODE ERROR” appears on the TV screen. For details, refer to “Region Number” (
pg. 7).
With Video CD discs with PBC control or some DVD
discs, the menu display may appear on the TV screen after starting playback. In this case, select an item which you want to play back from the menu. Otherwise, the playback cannot go forward. Refer to “Playback Control (PBC) Function” (
pg. 50) or “Locating A Desired Scene
Using The DVD Menu” (pg. 47).
The Library Database DVD Navi also enables you to search and select the desired titles. (
pg. 66)
4
Press 9 to pause playback.
To resume normal playback, press 4.
5
Press 8 to stop playback.
When a recordable disc is played, playback stops and a programme received with the unit’s tuner resumes on the TV screen.
When a playback-only disc is played, playback stops and the TV screen becomes all blue when you press 8. Pressing 8 again resumes a programme received with the unit’s tuner.
If x (OPEN/CLOSE) is pressed during playback, playback stops, then the disc tray opens.
6
To eject the disc, press x (OPEN/ CLOSE).
NOTE:
When the Library Database DVD Navi screen appears, choose a thumbnail image of the desired title on the TV screen, then press ENTER. (
pg. 66)
Basic Playback (DVD)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
A
TTENTION:
It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi-disc compatible (DVD-RAM, DVD-RW, DVD-R). It may even take several minutes when a disc is dirty, scratched or warped.
It may take a few seconds to start playback. This is not a malfunction.
Forward/reverse high-speed search and other operations cannot be performed while playback is stopped.
ENTER
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
DVD lamp
MV5S_00.book Page 24 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 25
Filename [MV5S_07Basic PlayRec.fm]
BASIC PLAYBACK
Page 25Wednesday, 31 August 2005 16:55
1
Load a cassette.
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.
Do not apply too much pressure when inserting.
If the record safety tab has been removed, playback
begins automatically.
The unit’s power comes on automatically and the counter is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly or VHS on the remote control so that the VHS lamp lights up on the unit.
3
Press 4 to start playback.
4
Press 9 to pause playback.
To resume normal playback, press 4.
5
Press 8 to stop playback.
6
To eject the cassette, press x (EJECT).
Basic Playback (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Usable cassettes
Full-Size VHS
T-30 (ST-30**) / T-60 (ST-60**) / T-90 / T-120 (ST-120**) / T-160 (ST-160**) / ST-210**
Compact VHS*
TC-20 (ST-C20**) TC-30 (ST-C30**) TC-40 (ST-C40**) * Compact VHS
camcorder recordings can be played on this unit. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.
** This unit can record on regular VHS and Super VHS
cassettes. However, it will record regular VHS signals only.
• S-VHS recording is not possible with this unit.
This unit is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the S-VHS format with regular VHS resolution.
•SQPB does not deliver Super VHS resolution.
MV5S_00.book Page 25 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_07Basic PlayRec.fm]
Masterpage:Left0
26 EN
Page 26Wednesday, 31 August 2005 16:55
BASIC RECORDING
1
Load a recordable disc.
For details, refer to “Placing A Disc” (pg. 9).
2
Press VHS/DVD on the unit repeatedly or DVD on the remote control so that the DVD lamp lights up on the unit.
3
Press PR +/– or the number buttons to select the channel you wish to record.
If you record the programmes received by the satellite receiver ...
1) Select “L-2” by pressing PR +/–.
2) Set the satellite receiver to the appropriate channel.
4
Press REC MODE repeatedly to select the recording mode, then press ENTER.
Each time you press REC MODE, the recording mode changes as follows:
XP ] SP ] LP ] EP ] FR60–FR360* ] FR420, FR480 ] (Back to the beginning)
* The value is selectable from 1 to 6 hours in 5-minutes interval
by pressing
we
repeatedly after selecting “FR60–FR360”. To
change the value in 30-minutes interval, press and hold
we
.
For details on the recording mode, see “Recording Mode” (pg. 27).
5
Press 7 on the unit to start recording. Or while holding 7, press 4 on the remote control.
6
Press 9 to pause recording.
To resume recording, press 4.
7
Press 8 to stop recording.
It takes about 10 seconds to end the writing session when you stop recording.
Basic Recording (DVD)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
A
TTENTION:
It is not possible to record programmes on a DVD-R disc which has already been finalised.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
we
DVD lamp
MV5S_00.book Page 26 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right+
EN 27
Filename [MV5S_07Basic PlayRec.fm]
BASIC RECORDING
Page 27Wednesday, 31 August 2005 16:55
NOTES:
It is recommended to format a DVD-RAM disc before use if you use the disc on this unit for the first time.
When using a brand-new DVD-RW disc, format the disc either in VR mode or in Video mode. (pg. 89)
Recordings made on DVD-R/RW disc must be finalised to play back on other DVD players. Perform “Finalise A Disc (DVD Deck Only)” (pg. 90).
You can record up to 99 programmes and 999 play lists on each disc.
Some programmes can only be recorded one time.
When recording is started, an index of the first part of
recording is automatically recorded. (
pg. 65) To record
satellite programmes, refer to page 36. To delete the index, refer to page 67.
Recording sometimes may stop or cannot be performed even if there is enough available capacity remaining on the disc.
Recording Mode
MPEG2 format is used as recording format. As a guide for picture quality, the “bps” unit is used to represent how much data can be recorded per second. The larger this value is, the better the picture quality becomes but more capacity is required for the recording. Select XP or SP for programmes where quick movement occurs, such as sports programmes, and LP or EP for talk shows, etc. with relatively less movement. The recording modes for a 4.7 GB disc are set as follows:
* For details on FR mode, refer to “Free Rate Function” (pg. 62).
Recording Resume Function
If there is a power outage during recording, Instant Timer Recording (ITR) (
pg. 61) or timer recording (pg. 29,
31), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.
Recording
mode
Recording amount
(approx.)
Maximum recording
time (approx.)
XP 9.6 Mbps 1 hour SP 5 Mbps 2 hours LP 2.5 Mbps 4 hours EP 1.6 Mbps 6 hours FR60–
FR360* (
pg. 62)
The amount varies depending on the selected time.
1 – 6 hours
FR420* 7 hours FR480* 8 hours
MV5S_00.book Page 27 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_07Basic PlayRec.fm]
Masterpage:Left+
28 EN
BASIC RECORDING
Page 28Wednesday, 31 August 2005 16:55
1
Load a cassette with the record safety tab intact.
The unit’s power comes on automatically and the counter is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly or VHS on the remote control so that the VHS lamp lights up on the unit.
3
Press PR +/– or the number buttons to select the channel you wish to record.
If you record the programmes received by the satellite receiver ...
1) Select “L-2” by pressing PR +/–.
2) Set the satellite receiver to the appropriate channel.
4
Press REC MODE repeatedly to set the recording mode.
5
Press 7 on the unit to start recording. Or while holding 7, press 4 on the remote control.
If “SUPERIMPOSE” is set to “AUTO” (pg. 79), “MARK” blinks on the screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. (
pg. 64)
If “DIRECT REC” is set to “ON”, the programme that
appears on the TV screen will be recorded. (
pg. 79)
6
Press 9 to pause recording.
You can select channel during the Record Pause mode.
To resume recording, press 4.
7
Press 8 to stop recording.
Recording Mode
Recording Resume Function
If there is a power outage during recording, Instant Timer Recording (ITR) (
pg. 63) or timer recording (pg. 29,
31), the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has expired.
Basic Recording (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Recording
mode
Maximum recording
time
(approx.)
Use
SP 3 hours Select when the picture
quality is important.
LP 6 hours Select when the time is
important. You can record 2 times longer than SP mode.
MV5S_00.book Page 28 Wednesday, August 31, 2005 4:55 PM
Masterpage:Right0
EN 29
Filename [MV5S_08Basic TimerDub.fm]
Page 29Wednesday, 31 August 2005 16:55
TIMER RECORDING
You can programme each deck to timer-record as many as 8 programmes up to 30 days ahead. With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the S
HOWVIEW number.
NOTES:
There may be cases that the SHOWVIEW Timer Programming function prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc with the SHOWVIEW Timer Programming function, the beginning of the second one may be left off the recording.
SHOWVIEW Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.
To record the programmes received by the satellite receiver, record on the DVD discs. For details, refer to “Satellite Receiver Users (DVD Deck Only)” above.
1 Press DVD or VHS to select the deck on which you want to
perform timer programming.
2 For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3 Press SHOWVIEW to access the SHOWVIEW screen. 4 Press the number buttons to
enter the S
HOWVIEW number of a
programme you wish to record, then press ENTER.
If you have made a mistake, press CANCEL and input the correct number before you press ENTER.
To clear all entered numbers at a time, press CLEAR (8).
If the number you entered is invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid S
HOWVIEW
number.
If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen, set Guide Program numbers manually. (pg. 83)
When “PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME” appears on the TV screen, you need to cancel some of the reserved programmes. (pg. 34)
5 The SHOWVIEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the programme data.
To cancel this setting, press RETURN.
6 Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
“STOP” (To advance/go back the stop time by 30 minutes, press and hold rt).
“DAILY/WEEKLY” (墌 pg. 30, “Weekly/Daily Recording”)
“VPS/PDC” (pg. 30, “VPS/PDC Recording”)
“REC MODE” (pg. 27, 28, “Recording Mode”)
“NAME” (pg. 67, “Modify Title Name”) (DVD deck only)
7 Press ENTER to access the Programme Confirmation screen. 8 Press ENTER to complete timer programming.
● To programme another timer, repeat steps 3 – 8.
If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
9 Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned off.
To disengage the timer mode, press TIMER # again.
SHOWVIEW™ Timer Programming
Make sure that the unit’s built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong channel number will be displayed on the SHOWVIEW programme screen in step 5. When this happens, set the correct Guide Program number for that station.
(
pg. 83, “SHOWVIEW
TM
System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the S
HOWVIEW
system: A Perform “S
HOWVIEW™ Timer Programming”.
B Set the satellite receiver to the appropriate channel before the selected programme begins. C Leave the satellite receiver’s power on.
ENTER
CLEAR ( )
DVD
0 – 9
VHS
CANCEL
SHOWVIEW
TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEWTM System Setup” (pg. 83) and
set the Guide Program number correctly.
123 456 789
0
SP
1234
SHOWVIEW PRGM
DATE
START
STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
MV5S_00.book Page 29 Wednesday, August 31, 2005 4:55 PM
Filename [MV5S_08Basic TimerDub.fm]
Masterpage:Left+
30 EN
TIMER RECORDING
Page 30Wednesday, 31 August 2005 16:55
Weekly/Daily Recording
You can record programmes with one of the following weekly/daily timer settings.
WEEKLY: Select to record a weekly programme. MON–FRI: Select to record a daily programme from Monday
through Friday.
MON–SAT: Select to record a daily programme from Monday
through Saturday.
SUN–SAT: Select to record a daily programme from Sunday
through Saturday.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are services designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video unit and have precedence over the advertised times you may have preset into the timer. This means that your unit will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.
NOTES:
When you use Manual Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.
VPS/PDC recording is also possible when a satellite receiver or a cable system is connected to [L-2 IN/DECODER] connector on your unit.
VPS/PDC recording is also possible via the [L-1 IN/OUT] connector.
How to check if the station being received transmits a VPS/ PDC signal
A Press DVD so that the DVD lamp lights up on the unit. B Hold down DISPLAY for about 5 seconds. “VPS/PDC” appears
blinking on the front display panel. If a VPS/PDC signal is detected from the station, “VPS/PDC” will stop blinking. If no VPS/PDC signal is detected from the station, “VPS/PDC” will blink at a slower rate. C Press DISPLAY again to return to normal display.
MV5S_00.book Page 30 Wednesday, August 31, 2005 4:55 PM
Loading...
+ 70 hidden pages