Page 1
Super-elastic drive
wheel (SE) and increased
ground clearance for
comfortable operation
High energy eciency
with maintenance-free
AC drive motor
Precise control with electric
steering and JetPilot
Safe cornering with
Curve Control
“SpeedControl”, our smooth
electronic control system
EZS C40
Electric tow tractor with SE tyres (4,000 kg)
The Jungheinrich EZS C40 is a versatile,
economic tow tractor for pulling trailers
weighing up to 4000 kg. Attaching
several trailers allows the loading areas
to be varied. This contributes to flexible
material turnover. With its super-elastic
drive wheel (SE) the EZS C40 also oers
optimum traction on smooth floors as
well as slightly uneven ground, such
as when operating outdoors. At the
same time the solid tyre absorbs minor
impacts, e.g. from bumpy ground and
dock levellers. With its increased ground
clearance the truck is ideally suited for
travelling on uneven surfaces, even outdoors. The coupling is visible from any
position and easily accessible. This saves
time and costs. The tow tractor can be
equipped with a wide range of couplings,
making it adaptable to practically any
type of trailer.
The 24-volt drive motor with its 3-phase
AC technology ensures a high performance. The advantages: Powerful
acceleration and high maximum speed.
At the same time, it oers clear energy
savings, extended operating times and
minimal maintenance costs. This is due
to the optimised eciency, the optimised match between the drive motor
and drive control as well as regenerative
braking.
High productivity features include the
low stand-on platform and the short distance from the operator position to the
load. The EZS works well in tight areas.
Its turning radius is so small that the
operator will feel that they are turning
on the spot. The JetPilot steering wheel,
supportive backrest and Curve Control
automatic speed reduction all provide
comfortable operation when cornering.
Page 2
EZS C40
h
14
1051
1385
Pulling ability
225
258
Wa
a
2
h
7
461
y
l
1
172
127
Ast
h
10
m
2
b
1
b
11
a
2
v=speed [km/h], m=incline [%], F=drawbar pull [N]
Example:
The EZS C40 can operate on a 3.5% incline
with a 1 tonne load. To do this the EZS
requires a 1000 N drawbar pull, enabling it to
reach approx. 7.5 km/h.
Note:
The EZS C40 is not suitable for continuous
operations over 800 N.
For gradients / descents greater than 4%
it is recommended that braked trailers be
used.
Page 3
Technical data in line with VDI 2198
1.1 Manufacturer (short form) Jungheinrich
1.2 Model EZS C40
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation stand-on
1.5 Load capacity/rated load Q t 4
1.7 Rated tractive power F N 800
Identification
1.9 Wheelbase y mm 1229
2.1.1 Net weight incl. battery (see row 6.5) kg 1185
2.3 Axle load, w.o. load, front / rear kg 660 / 525
Weights
3.1 Tyres SE
3.2 Tyre size, at front mm Ø 310 x 105
3.3 Tyre size, at rear mm Ø 301 x 85
chassis
3.5 Wheels, number front/rear (× = driven wheels) 1x /2
Wheels /
3.7 Track width, rear b
4.8.1 Standing height h
4.9 Height of tiller in drive position min. / max. h
4.12 Coupling height h10 mm 158
4.19 Overall length l1 mm 1659
4.21 Total width b1/b2 mm 810
4.32 Floor clearance centre wheelbase m
Basic dimensions
4.35 Turning radius W
5.1 Travel speed, w. / w.o. load km/h 8 / 12.5
5.5 Drawbar pull w. / w.o. load N 800
5.6 Max. drawbar pull, laden/unladen N 2600
Perform-
ance data
5.10 Service brake electro-magnetic
6.1 Drive motor rating S2 60 min. kW 2.8
6.4 Battery voltage/nominal capacity K5 V/Ah 24 / 620
trics
Elec-
6.5 Battery weight kg 470
8.1 Type of drive control AC SpeedControl
8.4 Sound pressure level at operator’s ear according to EN 12053 dB (A) 66
Misc.
mm 680
11
mm 182
7
mm 1450
14
mm 100
2
mm 1470
a
Issue: 03/2011
1)
2)
5)
4)
3)
4)
1)
JetPilot height
2)
Other coupling heights available
3)
Rated tractive power
4)
See diagram
5)
Total length without coupling, as different coupling systems are available
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Page 4
Benefit from the advantages
JetPilot steering wheel Easy entry and exit Superelastic drive wheel (SE) Different couplings available
Innovative 3-phase AC technology
Jungheinrich 3-phase AC motors oer
you higher performance while simultaneously reducing operating costs. Make
the most of these advantages:
• High level of eciency with excellent
energy management.
• Powerful acceleration.
• Rapid change in direction of travel
• No carbon brushes – maintenancefree drive motor.
• Two-year warranty on the drive motor.
Comfortable and safe operation
The SpeedControl impulse control
and Curve Control automatic speed
reduction when cornering provide
smooth, safe travel adjustable for every
application:
• The speed set by the drive switch is
maintained under all travel conditions
including gradients / descents.
• A choice of three travel programs for
individual adaptation to any needs.
• Regenerative braking with energy recovery when slowing down.
• Safe cornering, the operator has the
truck under control at all times.
Optimum ergonomics
• Low operator platform for frequent and
eortless entry and exit.
• Short distances for the operator from
the cab to reach the coupling and load.
• The coupling is clearly visible from any
position and is also easily accessible.
• Rapid and easy hitching/unhitching of
the trailers through semi-automatic
remote coupling unlocking (optional)
from the operator position.
• JetPilot electric steering wheel.
• Range of coupling systems for various
trailer types.
• All wheels are Super elastic (including drive wheel) to ensure maximum
comfort.
Rugged construction for the toughest
applications
• Frame made from high-grade, 8-mm
steel sheet.
• Extra-high frame apron on front cover.
• SE tyres – including on the drive wheel
– to protect operator and tow tractor.
• High ground clearance.
Long operating times
operating times:
• Standard version: 3 PzS 465 Ah
• Optionally available battery capacity
620 Ah.
Fully informed at all times
Extensive display and setting instruments
provide a complete overview at all times:
• CanDis (optional) provides information
on battery charge status, service hours
and error codes.
• PIN activation of truck and choice of
three travel programmes via keypad
(optional).
• Adjustable travel parameters through
CanDis and CanCode (optional).
Optional equipment
Extensive range of accessories for
individual tailoring to your application:
• Non-marking Super elastic tyres.
• Touch mode on both sides of backrest
for easy coupling and decoupling.
• Semi-automatic coupling remote control.
• Additional steel and/or rubber skirt.
• Mounting for radio data terminals.
• Folding driver’s seat for relaxed travel.
(optional)
Energy-saving 3-phase AC technology
and high battery capacities allow long
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
info@jungheinrich.co.uk
www.jungheinrich.co.uk
The German production
facilities in Norderstedt and
Moosburg are certified.
Jungheinrich fork lift
trucks meet European
safety requirements.
T_EZS C40_042014_en_UK_000
Loading...