Page 1
Multi-pallet transport of up to
three pallets
Ergonomic operator seat
layout
180° / 360° steering
High travel speeds
3-phase AC technology (48 V)
for high torques and dynamic
movement
ESE 420/430
Electric sideways-seated pallet truck (2,000/3,000 kg)
The ESE 420/430 electric sideways
seated pallet trucks are ideal for multipallet transport over long distances. Their
48-volt 3-phase AC motors ensure a
smooth starts, powerful acceleration and
high maximum speeds. The best basis for
high throughput rates.
This high performance level is extremely
easy to achieve and oers very high
levels of safety: Travel speed, brakes and
deadman switch are all controlled by
easily reached pedals. The lift functions
are operated using the SOLO-PILOT
control lever, which is readily to hand.
The optional height-adjustable footplate
and the adjustable steering wheel ensure
comfortable seating positions for all
operators. The steering can be switched
between 180° and 360°. The 360°
steering mode facilitates manoeuvring
by allowing seamless changes of direction with only a few turns of the steering
wheel. The changeover between forwards and reverse can also be performed
simply by pressing a button. The large
display oers a quick overview of the
steering setting, battery status and the
available travel programs.
With battery capacities of up to 620 Ah
and a robust design, the ESE 420/430 is
the ideal truck for intensive applications.
Page 2
ESE 420/430
Page 3
Issue: 06/2009
Technical data in line with VDI 2198
1.1 Manufacturer (short form) Jungheinrich
1.2 Model ESE 420 ESE 430
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation seat
1.5 Load capacity/rated load Q t 2 3
1.6 Load centre distance c mm 1200
Identification
1.8 Load distance x mm 1840
1.9 Wheelbase y mm 2260
2.1.1 Net weight incl. battery (see row 6.5) kg 2395 2475
2.2 Axle load, w. load, front / rear kg 2561 / 1900 2890 / 2980
2.3 Axle load, w.o. load, front / rear kg 1886 / 590 1916 / 559
Weights
3.1 Tyres Vulkollan
3.2 Tyre size, at front mm Ø 343 x 114
3.3 Tyre size, at rear mm Ø 85 x 80 Ø 90 x 92
3.4 Additional wheels (dimensions) mm Ø 285 x 100
3.5 Wheels, number front/rear (× = driven wheels) 2-1x/4
3.6 Track width, front b
Wheels / chassis
3.7 Track width, rear b
mm 604
10
mm 380
11
4.2.1 Total height h15 mm
4.4 Lift h
4.8 Seat height/stand height h
4.15 Lowered height h
4.19.4 Total length including fork length l
4.20 Length incl. back of forks l
4.21 Total width b
mm 115
3
mm 1200
7
mm 90
13
mm 3625
1
mm 1225
2
mm 1000
1/b2
4.22 Fork dimensions s/e/l mm 60 / 180 / 2400 70 / 200 / 2400
4.25 Width over forks b
Basic dimensions
4.32 Floor clearance centre wheelbase m
mm 560 580
5
mm 30 20
2
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 3865
4.35 Turning radius W
mm 3105
a
5.1 Travel speed, w. / w.o. load km/h 13 / 14
5.2 Lift speed, w. / w.o. load m/s 0.056 / 0.06
5.3 Lower speed, w. / w.o. load m/s 0.052 / 0.05
data
5.7 Gradeability laden/unladen % 6 / 15
Performance
5.10 Service brake electric
6.1 Drive motor rating S2 60 min. kW 6.9
6.2 Lift motor rating at S3 15% kW 3.0
6.3 Battery according to DIN 43531/35/36 A,B,C, no A
6.4 Battery voltage/nominal capacity K5 V/Ah 48 / 620
Electrics
6.5 Battery weight kg 945
8.1 Type of drive control Mosfet / AC
Misc.
3)
3)
1)
3)
1480
2211
3953
2750
3)
3)
2)
3)
1)
diagonal according to VDI: + 128 mm
2)
Diagonal travel according VDI: +83 mm
3)
Load section lowered: + 89 mm
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Page 4
Benefit from the advantages
Controls Comfortable seated position with
Greater eciency with three-phase
AC technology
Powerful three-phase AC technology
oers a whole range of advantages over
conventional DC motors:
• Powerful acceleration.
• No carbon brushes – maintenancefree drive motor.
• Two-year warranty on the drive motor.
generous
Easy operation with SOLO-PILOT
The control lever for activating all hydraulic functions and also selecting the
direction of travel and sounding the
horn.
• All controls are within the operator‘s
field of vision and are clearly allocated
to a single function.
• Precise operation by sensitive activation of all functions.
Ergonomic Drivers cab
• Comfortable armrest.
The operator position provides ideal
working conditions for relaxed, high productivity operations. Its strengths:
• Adjustable seat (seating position / body
weight) for all drivers.
• Height-adjustable footplate (optional).
• Important controls within easy reach.
• Generous space.
• 180°/360° three-phase steering with
optimised steering wheel position.
• Steering wheel adjustment.
Easy-to-read driver‘s display
High quality control panel displaying the
most important operating data.
• Travel direction and wheel position
display.
• Steering setting.
• Battery status with residual time display.
• Speed.
• Distance covered.
Safe entry with low step height and
grab handle
• A choice of three travel programmes
for individual matching to every operations.
• Operating hours and time of day.
Powerful battery
4 PzS 620 Ah
Robustly built for intensive applications
• Robust frame for continuous use at full
rated load.
• Torsion-resistant forks manufactured
with strong reinforced steel. Available
in a wide variety of versions.
Reduced maintenance cost
Easy-service components ensure
reduced long-term operating costs:
• Maintenance-free three-phase drive
motor with no carbon brushes.
• Easy to service with outstanding accessibility to all components.
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
info@jungheinrich.co.uk
www.jungheinrich.co.uk
The German production
facilities in Norderstedt and
Moosburg are certified.
Jungheinrich fork lift
trucks meet European
safety requirements.
T_ESE 420/430_012014_en_UK_000
Loading...