Jenway A-100, A-101, A-102 Instruction Manual

A-100 Series

Peltier/Sipper System

User’s Manual

Contents

Preface…………………………………………………..…………………………………………1

1. Safety………………………………………….………………………………………1

2. About the Instrument…………………………..……………………………………1

3. Symbol………………………..…………………………………………………………1

Chapter II Summary…………………………………………………………………………2

1. Working principle and structure………………………………………………………2

2. Main Specifications…………………………………………………………………2

Chapter III Install Instrument………………………………………………………………3

1. Environment Required………………………………………………………………3

2. Voltage Confirmation…………………………………………………………………3

3. Installation……………………………………………………………………………3

Chapter IV

1. Introduction………………………………………..……………………………………5

2. Operation Panel……………………………..…………………………………………5

3. Keypad Description…………………….………………………………………………5

Chapter V

1. Software Structure………………….…….……………………………………………7

2. Basic Operation……………….…….………………………………………………7

Chapter VI

1. Daily Maintenance……………………………………………………………………9

Appendix :Ⅰ Consumable parts……………………….………………………………………10 Appendix :Ⅱ Packing List………………….…..………………….……………………………10

Introduction of the Instrument…

Instrument Operation

1) Temperature Control………………………………………………………………7

2) Automatic Sipper………………...…………………………………………………8

Instrument Maintenance

1) Surface Clean………………………………………………………………………9

2) Clean the Silica Gel Pipe…………..………………………………………………9

………………………………………………………7

……………………………..………………………9

……………………………………………5

- 1 -

PREFACE

1．

． Safety

．．

This instruments are designed according to the following safety documents:《IEC 61010-1：2001》（Which is :《Measurement, Control and Laboratory Electric Equipments Safety Requirement》Part 1） and 《IEC 60601 — 1：1988》（Which is：《Electric Apparatus of Medical Treatment》 Part 1).

2．

． About the Instruments

．．

A-100 Series Peltier/Sipper System is an electrical test instruments which is widely used in the laboratories.

 Use Frequency: Intermittence

 Excessive Voltage(Current): No

 Pollution Class: Class 1

3．

． Symbols

．．

Caution, Danger!

Caution, Hot!

Ground

Fuse

Recall, this instrument will be called back by the appointed Electrical Treatment Department or by the original Manufacturer when wasted.

- 2 -

Series A-100 Peltier/Sipper System

Chapter I Summary

A-100 Series Peltier/Sipper System (A-100: Peltier/Sipper System; A-101: Sipper Unit; A-102: Ambient Peltier Unit), as a spectrophotometer matching accessories, with high stability, flexible and accurate. It can be widely used in chemical, pharmaceutical, biological and chemical, metallurgy, light industry, textiles, materials, environmental protection, medical laboratories and education sectors. It is a conventional laboratory preparation of apparatus.

1．

． Working principle and structure

．．

Peltier temperature controller using the device as temperature control element. By controlling the current size to raise or lower the temperature. With a fast response and accurate temperature control characteristics. Autosampler selected stepper motor driven vacuum pump drawing samples. With a flow rate of a balanced and accurate characteristics of injection.

2．

． Main Specifications

．．

Specifications for A-100 Series Peltier/Sipper System：

 Temp. Range: 15—40℃(Environment Temp.:22℃)  Temp. Accuracy: ±0.2℃  Temp. Display: 0.1℃  Sipper Sample Volume： 1、2、3、4、5、7.5、10、12.5、15ml/min  Sipper Sample Accuracy: ±5%  Display： 128×64 dot Matrix LCD  Dimensions： 270×170×115mm  Weight： 3kg

+ 14 hidden pages