Jensen JIMS-260I User Manual

WALL MOUNTABLE DOCKING MUSIC

SYSTEM WITH CD FOR iPod and iPhone

USER MANUAL

JiMS-260i

(iPod/iPhone Not Included)

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the
start of your musical enjoyment. Now it's time to consider how you can maximize
the fun and excitement your equipment offers. This manufacturer and the
Electronic Industries Association's Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or distortion and,
most importantly, without affecting your sensitive hearing. Sound can be
deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and

without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the
future. After all, we want you listening for a lifetime.

We Want You Listening For a Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until it is
too late, this manufacturer and the Electronic Industries Association's Consumer
Electronics Group recommend you avoid prolonged exposure to excessive noise.

Customer's Record:

The serial number of this product is found on its back cover. You should note the
serial number of this unit in the space provided as a permanent record of your
purchase to aid in identification in the event of theft of loss.

Model Number: JiMS-260i Serial Number:

1

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can result
in potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.

1. Read these instructions – All the safety and operating instructions should be
read before the appliance is operated.

2. Keep these instructions – The safety and operating instructions should be kept
for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating
instructions should be adhered to.

4. Follow all instructions – All operation and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near
water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool.

6. Clean only with dry cloth – The appliance should be cleaned only as
recommended by the manufacturer.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. The appliance should be situated so that its
location or position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or placed in a built-in installation, such as
a bookcase or cabinet that may impede the flow of air through the ventilation
openings.

8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

10.The system has as AC plug and will only fit into matching AC outlets. This is
a safety feature to reduce the possibility of electric shock. If the plug will not
fit in your AC outlets, you should have the outlet changed by qualified licensed
electrician. Do not use an adaptor to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.

11.Only use attachments / accessories specified by the manufacturer.

12.Unplug this apparatus during lightning storms or when unused for long periods
of time.

13.Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

14.This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.

15.Power Sources – The appliance should be connected to a power supply only
of the type described in the operating instructions or as marked on the
appliance. Do not overload wall outlet.

16.Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.

17.Do not attempt to dismantle, open or repair this product yourself. If a fault
occurs, seek advice from your local qualified service technician or contact the
distributor via the telephone number at the back of this instruction manual.

18.Caution marking and nameplate are located on back of product.

2

CLASS 1 LASER PRODUCT

CAUTION

CAUTION

CLASS 1 LASER PRODUCT

APPAREIL LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED

AVOID EXPOSURE TO BEAM.

This product contains a low power laser device.

Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.

Follow the advice below for safe and appropriate operation.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

o As the laser beam used in this compact disc player is harmful to the eyes, do

not attempt to disassemble the casing.

o Stop operation immediately if any liquid or solid object should fall into the

cabinet.

o Do not touch the lens or poke at it. If you do, you may damage the lens and

the player may not operate properly.

o Do not put anything in the safety slot. If you do, the laser diode will be ON

when the CD door is still open.

o This unit employs a laser. The use of controls or adjustment or performance of

procedures other than those specified here may result in exposure to
hazardous radiation.

ON PLACEMENT

• Do not use the unit in places which are extremely hot

• Place the unit on a flat and even surface.

• Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by

covering it with a cloth or by placing it on a carpet.

cold, dusty or humid.

,

ON CONDENSATION

• When left in a heated room where it is warm and damp, water droplets or condensation

may form inside the unit.

• When there is condensation inside the unit, the unit may not function normally. Let it

stand for 1 to 2 hours before turning the power on, or gradually heat the room up and
dry the unit before use.

Should any trouble occur, remove the power source and refer servicing to qualified
personnel.

3

PRECAUTION FOR USE

• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.

• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE
MAINS VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE.

• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE
OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.

IMPORTANT NOTES

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.

• Places subject to constant vibration.

• Dusty, humid or moist places.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

4

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt pads,
available at hardware stores and home improvement centers everywhere, and
apply these pads to the bottom of the rubber 'feet' before you place the product on
fine wooden furniture.

PRODUCT FEATURES

The JiMS-260i is an iPod/iPhone Docking Music System with incorporates the
following features:

• Player / Charger for iPod nano, iPod touch, iPod classic, iPod video and

iPhone.

• Audio CD player with CD and CD-R/RW compatibility

• CD Playback modes :

- Repeat one / Repeat All

- Program playback up to 20 tracks

• FM digital tuner with 10 presets

• Auxiliary input jack

• Pre-set EQ control (Rock, Classic, Jazz & Pop)

• Digital volume control

• Sleep timer function

• Wake Timer function - Wake to radio, CD or your iPod/iPhone

• Video Line-out provides video signal output when iPod/iPhone with video is

docked

5

INSTALLATION

FOR TABLE TOP USE

Attach the stand to the main unit as shown in figure 1a below. Attach the stands to the
speakers as shown in figure 1b below.

Fig. 1a Fig.1b

FOR WALL MOUNTING

1) Detach the stands from both
speakers and from the main unit.

2) Use the supplied wall-mounting
template to make anchor hole
marks on the wall. Make sure the
marks are level before drilling.

3) Drill 1/4” holes on the marks.

4) Insert the included plastic
anchors into the holes and push
in until they are flush with the
wall.

5) Insert the included screws into the anchors and tighten until the screw head is about
1/4” away from the wall. Line up the slots located on the back of the main unit and
speakers with the screws in the wall. See illustration below.

NOTE: This unit is not magnetically shielded and may cause color distortion on the

screen of some TVs or video monitors. To avoid this, you may need to move the unit

further away from the TV or monitor if unnatural color shifts or image distortion occurs.

6