Jabra MultiuseTM
headsets:
Jabra JX10 Multiuse
BT8040 MultiuseTM
Jabra BT5020 Multiuse
Jabra Bluetooth®
enablers:
TM
TM
TM
Jabra A330 Multiuse
Bluetooth® dongle
Jabra A7010 Multiuse
Bluetooth® hub
TM
FAQ
What is Jabra Multiuse?
Jabra Multiuse headsets is a family of Bluetooth headsets that can be used •
simultaneously with two Bluetooth enabled devices - e.g. mobile phone and desk
phone (via the Jabra Bluetooth hub) or mobile phone and PC softphone (via the
Jabra Bluetooth dongle).
What can the Jabra Bluetooth hub do?
The Jabra Bluetooth hub is a Bluetooth enabler for corded desk phones.•
Once the Bluetooth hub is connected, the Jabra Multiuse headset can be used •
with both a corded desk phone and a Bluetooth mobile phone.
Jabra MultiuseTM headset solutions
– with Bluetooth® hub or dongle
www.jabra.com
What can the Jabra Bluetooth dongle do?
The Jabra Bluetooth dongle is a Bluetooth enabler for PC based softphones (VoIP).•
Once the Bluetooth dongle is connected to the PC, the Jabra Multiuse headset •
can be used with both a PC softphone and a Bluetooth mobile phone.
Does Jabra Multiuse headsets with Bluetooth hub support remote
answerer?
Yes! To activate this function you need to add a remote answerer (Accessory GN •
1000) to the solution. This allows you to answer calls with your Jabra Multiuse
headset without returning to your desk or lifting the handset from the telephone.
When a call comes in, the remote answerer sends a tone to the headset. When
the headset is activated, the lifter raises the phone handset o the hook
automatically.
If I experience problems setting up Jabra Multiuse headsets, where
can I get help?
Please check the manual and/or the Quick Start Guide included in the pack. •
What can be done if the person on the other end has diculty
hearing me?
First of all, make sure you have positioned the dial tone switch in the Bluetooth •
hub correctly.
See “adjusting settings with a test call from your desk phone” in the user manual •
(Resides on the CD included in the package). Also make sure that the microphone
volume is set correctly.
If the person on the other end can’t hear you at all, it is probably the dial tone •
switch. If your voice is very low for the person on the other end, it is probably due
to incorrect setting of the microphone volume. The microphone volume can be
adjusted on the Bluetooth hub. See section “Adjusting settings with a test call
from your desk phone” in the user manual (On the CD included in the package) or
quick set-up guide.
FAQ
Jabra MultiuseTM headset solutions
– with Bluetooth® hub or dongle
www.jabra.com