Jabra BT2010 User Manual

USER MANUAL

ENgLiSh

THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

ABOUT YOUR JABRA

WHAT YOUR NEW HEADSET CAN DO

GETTING STARTED.

CHARGE YOUR HEADSET

TURNING YOUR HEADSET ON AND OFF

PAIRING IT WITH YOUR PHONE

WEAR IT HOW YOU LIKE IT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

HOW TO

WHAT THE LIGHTS MEAN

TROUBLESHOOTING

NEED MORE HELP?

TAKING CARE OF YOUR HEADSET

PROTEC T YOUR HEARING

WARRANTY .

CERTIFICATION AND SAFET Y APPROVALS

GLOSSARY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

BT2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

. . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . .15

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

1

ThANk yoU

Thank you for purchasing the Jabra BT2010 Bluetooth® headset.
We hope you enjoy it! This instruction manual will get you started
and ready to make the most of your headset.

AboUT yoUR JAbRA bT2010

Volume up

1

Volume down

2

Light indicater (LED)

3

Answer/end button

O/on button

Fig. 1

Charging socket

4

O ptional earhook

5

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

2

WhAT yoUR hEAdSET cAN do

Your Jabra BT2010 lets you do all this:

• Answer calls

• End calls

• Adjust volume level

• Reject calls*

• Voice dialing*

• Last number redialing*

• Call waiting*

• Place call on hold*
* Phone dependent

Specications

• Talk time up to 7 hours / standby time up to 200 hours

• Rechargeable battery with charging option from AC power
supply, USB cable or car charger (USB cable and car charger not
included)

• Weight 2/5 oz (11 grams)

• Operating range up to approx. 33 feet (10 meters)

• Headset and hands-free Bluetooth proles (see glossary)

• Bluetooth version 2.0, EDR and eSCO

gETTiNg STARTEd

You should follow three steps before using your headset

1. Charge your headset

2. Activate Bluetooth on your mobile phone (refer to the

manual for your Mobile phone)

3. Pair your headset to your mobile phone

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

3

The Jabra BT2010 is easy to operate. The answer/end button on
the headset performs dierent functions depending on how long
you press it.

Instruction: Duration of press:

Tap Press briey

Press

Press and hold

Approx: 1 second

Approx: 5 seconds

chARgE yoUR hEAdSET

Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the light indicator (LED) has a solid LED light,
your headset is charging. When the solid LED light turns o, it is
fully charged. (See g. 2)

Fig. 2

1 2

Use only the charger provided in the box - do not user chargers
from any other devices as this may damage your headset.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

4

Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period.
We therefore recommend that you recharge your device at
least once a month.

TURNiNg yoUR hEAdSET oN ANd off

• Press the answer/end button until you see a burst of ashes on
the indicator light (LED) to turn your headset on.

• Press and hold
ashes on the indicator light (LED) to turn the headset o.

Please note that the LED indicator light turns o after 1 minute to
save battery. Headset is still active, and light will ash again after
tap on the answer/End button or any call activity. To check if the
headset is on, tap the answer/end button once – the LED indicator
light will ash, if the headset is on.

the answer/end button until you see a burst of

PAiRiNg iT WiTh yoUR PhoNE

Headsets are connected to phones using a procedure called ‘pair­ing’. By following a few simple steps, a phone can be paired with a
headset in a matter of minutes. (See g. 3)

1. Put the headset in pairing mode

• When you turn on your Jabra BT2010 for the rst time, the
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit.

2. Set your Bluetooth phone to ‘discover’ the Jabra BT2010

• Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and select­ing the option to ‘discover’ or ‘add’ a Bluetooth device.*

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

5

3. Your phone will nd the Jabra BT2010

• Your phone will nd the headset under name “Bluetooth head
set”. Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with
the passkey or PIN = 0000 (zeros). Your phone will conrm
when pairing is complete.

Fig. 3

1 2

In case of unsuccessful pairing, put the Jabra BT2010 into pairing
mode manually. Make sure the headset is o. Press and hold the
answer/end button for approximately 5 seconds until the LED has
a constant light.The LED will ash before the light is constant –

keep holding down the button until light is constant

.

3 4

-

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

* Phone dependent

6

WEAR iT hoW yoU LikE iT

The Jabra BT2010 is ready to wear without an earhook – simply
insert it in your right or left ear. If you prefer to use the earhook,
click it on as shown on the illustration. (See g. 4)

Fig. 4

For optimal performance, wear the Jabra BT2010 and your mobile
phone on the same side of your body or within line of sight. In
general, you will get better performance when there are no ob­structions between your headset and your mobile phone.
(See g. 5)

Fig. 5

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

7

hoW To…

Answer a call

• Tap the answer/end button on your headset to answer a call.

End a call

• Tap the answer/end button to end an active call.

Make a call

• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not support this function, tap on
the answer/end button on the Jabra BT2010 to receive the call
in the headset.

Reject a call*

• Press the answer/end button when the phone rings to reject an
in-coming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
hear a busy signal.

Activate voice dialing*

• Press the answer/end button. For best results, record the
voice-dialling tag through your headset if your phone allows
you to do so. Please consult your phone’s user manual for more
information about using this feature.

Redial last number*

• Double tap the answer/end button.

Adjust sound and volume

• Press the volume up or down (+ or -) to adjust the volume.

Mute/Unmute

• Press the volume up and down (+ or -) at the same time to
mute the call (the caller will not hear your voice. To un-mute,
press either the volume up or volume down button.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

8

Call waiting and placing a call on hold*

This lets you put a call on hold during a conversation and answer
a waiting call.

• Press the answer/end button once to put the active call on hold
and answer the waiting call.

• Press the answer/end button to switch between the two calls.

• Tap the answer/end button to end the active conversation.

* Functions marked with * are dependent on your phone support­ing these features. Check your phone’s user manual for further
information.

WhAT ThE LighTS MEAN

ENgLiSh

What you see What this means about your

Solid light: In pairing mode – see Pairing

Slow single ash: Connected to phone and in

Slow double ash: Not connected to phone and

Quick single ash: Active on call

Quick double ash: Incoming/Outgoing call

Triple ash: Battery low

* BT2010 is equipped with Jabra Discreet Light feature, meaning
that light indicator (LED) turns o after 1 min of non-activity.
Headset is still active, and light will ash again after a tap on the
answer/end button or any call activity.

JABRA B T2010 BLUETOOTH HEAD SET

headset

section

standby mode*

standby mode*

9

TRoUbLEShooTiNg & fAQ

I hear crackling noises

• For the best audio quality, always wear your headset on the
same side of the body as your mobile phone.

I cannot hear anything in my headset

• Increase the volume on the headset.

• Ensure that the headset is paired with the phone.

• Make sure that the phone is connected to the headset – if it
does not connect either from the phone’s Bluetooth menu or
by tapping the answer/end button, follow the pairing proce­dure (refer to pairing section in this user manual).

• You can determine whether your headset is connected to a de
vice by looking at the ashes on the headset after tapping the
answer/end button when the headset is on: single slow ashes
means that the headset is connected to a device, double slow
ashes means that the headset is currently not connected.

I have connection problems

• You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions; refer to this sec­tion in this user manual.

• You can determine whether your headset is connected to a de
vice by looking at the ashes on the headset after tapping the
answer/end button when the headset is on: single slow ashes
means that the headset is connected to a device, double slow
ashes means that the headset is currently not connected.

Will the JabraBT2010 work with other Bluetooth equipment?

• The Jabra BT2010 is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1, 1.2 or 2.0 and support a
headset and/or hands-free Bluetooth prole.

I cannot use Reject call, Call on hold, Redial or Voice dialling

• These functions are dependent on your phone supporting
them. Please check your phone’s manual for further details.

ENgLiSh

-

-

JABRA B T2010 BLUETOOTH HEAD SET

10

NEEd MoRE hELP?

1. Web: www.jabra.com
(for the latest support info and online User Manuals)

2. E-mail: Tech Support: [e-mail]
Information: [e-mail]

3. Phone: [phone] (toll-free in USA)
[phone] (Canada)

TAkiNg cARE of yoUR hEAdSET

• Always store the Jabra BT2010 with the power o and safely
protected.

• Avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may aect operation. High temperatures may
also degrade performance.

• Do not expose the Jabra BT2010 to rain or other liquids.

WARNiNg!

Headsets are capable of delivering sounds at loud volumes
and high pitched tones. Exposure to such sounds can result
in permanent hearing loss damage. The volume level may
vary based on conditions such as the phone you are using, its
reception and volume settings, and the environment. Please read
the safety guidelines below prior to using this headset.

Safety guidelines

1. Prior to using this product follow these steps:

• Before putting on the headset, turn the volume control to its

lowest level,

• Put the headset on, and then

• Slowly adjust the volume control to a comfortable level.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

11

2. During the use of this product

• Keep the volume at the lowest level possible and avoid using

the headset in noisy environments where you may be inclined
to turn up the volume;

• If increased volume is necessary, adjust the volume control

slowly; and

• If you experience discomfort or ringing in your ears,

immediately discontinue using the headset and consult a
physician.

With continued use at high volume, your ears may become
accustomed to the sound level, which may result in permanent
damage to your hearing without any noticeable discomfort.

Using the headset while operating a motor vehicle, motorcycle,
watercraft or bicycle may be dangerous, and is illegal in some
jurisdictions. Check your local laws. Use caution while using your
headset when you are engaging in any activity that requires your
full attention. While engaging in any such activity, removing the
headset from your ear area or turning o your headset will keep
youfrom being distracted, so as to avoid accident or injury.

3. Keep out of reach of children:

• The plastic bags the product and its parts are wrapped in are
not toys forchildren. The bags themselves or the many small
parts they contain may cause choking if ingested. Never try to
dismantle the product yourself.

None of the internal components can be replaced or repaired by
users.

Only authorised dealers or service centres may open the product.
If any parts of your product require replacement for any reason,
including normal wear and tear or breakage, contact your dealer.

Avoid exposing the product to rain or other liquids.

4. ACA TS028 – Ignition of ammable atmospheres

Do not use the Headset in environments where there is a danger
of ignition of ammable gases.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

12

WARRANTy

Service and Warranty Information

Limited one (1) - Year Warranty
GN US, inc., warrants this product to be free from defects in

materials and workmanship (subject to the terms set forth
below) for a period of one (1) year from the date of purchase
(“Warranty Period”). During the Warranty Period, GN will repair
or replace (at GN’s discretion) this product or any defective parts
(“Warrenty Service”). If repair or replacement is not commercially
practicable or cannot be timely made, GN may choose to refund
to you the purchase price paid for the aected product. Repair or
replacement under the terms of this warranty does not give right
to any extension or a new beginning of the period of warranty.

Claims under the Warranty

To obtain Warranty Service, please contact the GN dealer from
which you purchased this product or visit www.jabra.com for further
information about customer support.You will need to return this
Product to the dealer or ship it to the dealer or to GN (if so indicated
on www.jabra.com) in either its original packaging or packaging
aording an equal degree of protection.You will bear the cost
of shipping the product to GN. If the Product is covered by the
warranty, GN will bear the cost of shipping product back to you
after the completion of service under this warranty. Return shipping
will be charged to you for products not covered by the warranty or
requiring no warranty repair.

The Following information must be presented to obtain Warranty
Service: (a) the product, and (b) proof of purchase, which clearly
indicates the name and address of the seller, the date of purchase
and the product type, which is evidence that this product is
within the Warranty Period. Please further include (c) your return
address. (d) daytime telephone number, and (e) reason for return.
As part of GN/Jabra’s eorts to reduce environmental waste
you understand that the product may consist of reconditioned
equipment that contains used components, some of which have
been reworked. The used components all live up to GN/Jabra’s
high quality standards and comply with the GN product
performance and reliability specications. You understand that
replaced parts or components will become the property of GN.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

13

Limitation of Warranty

This warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is sold or
otherwise transferred to another party. The warranty provided by GN
in this statement applies only to products purchased for use, and not
for resale. It does not apply to open box purchases, which are sold
“as is” and without any warranty. Specically exempt from warranty
are limited-life consumable components subject to normal wear
and tear, such as microphone windscreens, ear cushions, modular
plugs, ear tips, decorative nishes, batteries, and other accessories.
This warranty is invalid if the factory-applied serial number, date code
label, or product label has been altered or removed from this product.
This Warranty does not cover cosmetic damage or damage due to
misuse, abuse, negligence, Acts of Nature, accident, disassembling
or modication of, or to any part of, the product. This Warranty does
not cover damage due to improper operation, maintenance or
installation, or attempted repair by anyone other than GN or a GN
dealer which is authorized to do GN warranty work. Any unauthorized
repairs will void this Warranty

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY
ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. GN SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED
TO THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PRACTICAL PURPOSE.

NOTE! This warranty gives you specic legal rights. You may have
other rights which vary from location to location. Some jurisdictions
do not allow the exclusion or limitation of incidental or consequential
damages or implied warranties, so the above exclusions may not apply
to you. This warranty does not aect your legal (statutory) rights under
your applicable national or local laws.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

14

cERTificATioN ANd SAfETy APPRovALS

FCC

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

Users are not permitted to make changes or modify the device
in any way. Changes or modications not expressly approved by
Jabra (GN US, Inc.) will void the user’s authority to operate the
equipment.

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for
help.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

15

The device and its antenna must not be co-loaded or operating in
conjunction with any other antenna or transmitter.

Industry Canada

Operation is subject to the following two conditions: (1) This
device may not cause interference and (2) This device must accept
any interference, including interference that may cause undesired
operation of the device.

The term “IC:” before the certication/registration number only
signies that registration was performed based on a Declaration
of Conformity indicating that Industry Canada technical
specications were met. It does not imply that Industry Canada
approved the equipment.

CE

This product is CE marked according to the provisions of the
R & TTE Directive (99/5/EC).

Hereby, GN A/S, declares that this product is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC.

For further information please consult http://www.jabra.com

Bluetooth

The Bluetooth® word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Jabra is under license. Other
trademarks and trade names are those of their respective owners.

ENgLiSh

JABRA B T2010 BLUETOOTH HEAD SET

16

gLoSSARy

1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over a
short distance (approx. 33 feet). Get more information at www.
bluetooth.com

2. Bluetooth proles

devices communicate with other devices. Bluetooth phones
support either the headset prole, the hands-free prole
or both. In order to support a certain prole, a phone
manufacturer must implement certain mandatory features
within the phone’s software.

3. Pairing

4. Passkey or PIN

5. Standby mode

creates a unique and encrypted link between two
Bluetooth devices and lets them communicate with each other.
Bluetooth devices will not work if the devices have not been
paired.

to pair it with your Jabra BT2010. This makes your phone and
the Jabra BT2010 recognize each other and automatically work
together.

for a call. When you ‘end’ a call on your mobile phone, the
headset goes into standby mode.

are the dierent ways that Bluetooth

is a code that you enter on your mobile phone

is when the Jabra BT2010 is passively waiting

ENgLiSh

Dispose of the product according
to local standards and regulations.

www.jabra.com/weee

JABRA B T2010 BLUETOOTH HEAD SET

17

© 2007 GN US, inc. All rights reserved. Jabra® is a registered
trademark of GN A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth®
word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by GN US, inc. is under license.
(Design and specications subject to change without notice).

www.jabra.com

MAD E IN C HINA

TYP E: OTE1
FCC I D: BC EOTE1
IC: 2 386COT E1

3200392 B