Interlogix NX-540E Specsheet

Intrusion

NetworX
“Operator”
Telephone
Interface Module

OVERVIEW

The NetworX “Operator” Telephone Interface Module is a
microcomputer controlled telephone interface module that may
be added to NetworX control panels. The “Operator” converts
any touchtone telephone to a system keypad and allows
system functions to be accessed via telephone on premise
or off-site. There are 48 separate zone descriptions that may
be programmed to fi t the owner’s needs. Each zone/output
description is programmable using the 182-word library list.

STANDARD FEATURES

• Converts any touchtone telephone to a system keypad

• Allows system functions to be accessed via telephone
on or off-site

• Each zone/output description is programmable using
the 182 word library list

• Compatible with the NX-6, NX-8 and NX-8E control panels

Specifi cations

Operating power
nominal 12VDC supplied by control panel

Current

Control outputs 32 X10 outputs with programmable descriptions
Dimensions (W x L x H) 3.5 x 6.0 x 1.0 in.
Telephone requirement Touchtone telephones only

Regulatory

Standby 55mA
Active 130mA

FCC part 15, Class B verifi cation requirements,
and FCC Part 68 Modifi cation

FCC Registration Number: GCQUSA-30138-AL-E

Ordering Information

NX-540E "Operator" Telephone Interface Module

North America

T 855-286-8889

Latin America

T 561-998-6114

interlogix.com

Specifi cations subject to change without notice.

© 2014 United Technologies Corporation.

All rights reserved.

Interlogix is part of UTC Building & Industrial Systems,

a unit of United Technologie s Corporation.

306-3677 2014/03 (75051)