Interlogix NX-4V2 User Manual

NX-4V2 LED Keypad User Manual

P/N I-NX4V2-OM • REV C • NOV12

Copyright

© 2012 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of United Technologies

Corporation. All rights reserved.

Trademarks and

patents

Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.

Contact information

www.utcfireandsecurity.com or www.interlogix.com

Customer support

www.interlogix.com/customer-support

Content

Security system notes 1
Introduction 2
Glossary of terms 4
Understanding the lights 5
Emergency activation keys 6
Keypad functions 6

Arming your system in the “AWAY” mode 6
Arming your system in the “STAY mode” 7

Using the Quick Arm (optional) 8
Changing modes while system armed 8
Disarming the system 8
CANCEL / ABORT feature (optional) 8
Bypassing zones 9
Group bypass 9
Unbypassing 9
Turning the door chime ON and OFF 9

Adding and changing user codes 10
Assigning user code authority levels 11

Other keypad functions 11

Service menu 14
Emergency evacuation plans 16
System notes 17

NX-4V2 LED Keypad User Manual i

ii NX-4V2 LED Keypad User Manual

Installing/Service Company _________________________________

For Service Call __________________________________________

Central Station ___________________________________________

Duress Code ____________________

FUNCTION CODES

Function Code

Controls Function

EMERGENCY ACTIVATION KEYS (check if enabled)

Fire

Auxiliary Emergency

Police

PROGRAMMED FUNCTIONS

Abort Delay (σ)

Cancel Alarm

Group Bypass (σ)

Auto Bypass (σ)

Chime

Quick Arm (σ)

Auto Instant

Communicator Test

Re Exit

Battery Test

Forced Arming (σ)

Siren Test

(σ) These features should not be enabled on UL listed systems.

ENTRY / EXIT DELAY TIMES

Exit Delay Time __________

Secondary Exit Delay Time ________

Entry Delay Time _________

Secondary Entry Delay Time _______

ZONE DESCRIPTIONS

01 _______________________

05 _______________________

02 _______________________

06 _______________________

03 _______________________

07 _______________________

04 _______________________

08 _______________________

Security system notes

NX-4V2 LED Keypad User Manual 1

Introduction

THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR
SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL
USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE
INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET. FAILURE TO DO
SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING
PROPERLY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE
LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT
UNDERSTAND ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR
INSTALLING COMPANY.

The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a
telephone keypad. If your Security Control has been so programmed, you may
be able to turn on (ARM) your System by simply pressing the [STAY] or [EXIT]
key. The system must always be disarmed using a 4 or 6 digit code. The LED
keypad includes up to 35 lights and a built-in electronic sounder. These provide
specific information relating to the status of the security system which is
described in the booklet. Understanding what the lights and sounds mean will
help you to easily operate your system.

READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE
KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE.

KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS
SYSTEM RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:

1. The quantity, quality, and placement of security devices attached to this
system.

2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.

YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING
A SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.

• Your security system is an electronic device and is subject to failure or
malfunction. Do not rely on it as your single source of security.

• Your system should be tested weekly.

• Your system will not work without power.

• Warning devices will need to be loud enough, wired correctly, and properly

placed to provide notification of an alarm event.

• Smoke and heat detectors may not detect heat and smoke in all situations.

• Use qualified security professionals to install and maintain your security

system.

• It may be possible to arm the security system without the backup battery
connected. Your periodic test should be done with A.C. Power removed to
verify the battery is connected and adequately charged.

2 NX-4V2 LED Keypad User Manual

• Care should be taken to plug in and restrain the A.C. Transformer after
testing.

PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS
CAREFULLY BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM.
IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF
YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE
INSTALLING COMPANY.

NX-4V2 LED Keypad User Manual 3