Interlogix NX-4-FP-12 User Manual

NetworX™ Series

NX-1500E LED Keypad

User Manual

SECURITY SYSTEM NOTES

Installing/Service Company _________________________________
For Service Call __________________________________________
Central Station ___________________________________________

Duress Code ____________________

FUNCTION CODES

Function Code Controls Function

This system is  is not  partitioned.

EMERGENCY ACTIVATION KEYS (check if enabled)

 Fire  Auxiliary Emergency  Police

PROGRAMMED FUNCTIONS

 Abort Delay  Cancel Alarm  Forced Arming
 Auto Bypass  Change Partitions  Group Bypass
 Auto Instant  Chime  Quick Arm
 Battery Test  Communicator Test  Re Exit

 Siren Test

ENTRY / EXIT DELAY TIMES

Exit Delay Time __________ Secondary Exit Delay Time ________
Entry Delay Time _________ Secondary Entry Delay Time _______

ZONE DESCRIPTIONS

01 __________________________ 09 __________________________
02 __________________________ 10 __________________________
03 __________________________ 11 __________________________
04 __________________________ 12 __________________________
05 __________________________ 13 __________________________
06 __________________________ 14 __________________________
07 __________________________ 15 __________________________
08 __________________________ 16 __________________________

Page 1

THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR
SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION.
ALL USERS OF YOUR SECURITY SYSTEM SHOULD READ AND F OLLOW
THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET AND, IF
POSSIBLE, PRACTICE ON THE KEYPAD CONTROL WHILE YOUR
PROFESSIONAL INSTALLER IS ON SITE. FAI LURE TO DO SO COULD
RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY. THIS
BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE
LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND ANY
PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR INSTALLING
COMPANY SHOWN ON PAGE 1.

The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a
telephone keypad. If your Security Control has been so programmed, you
may be able to turn on (ARM) your System by simply pressing the[STAY] or
[EXIT] key. The system must always be disarmed using a 4 or 6 digit code.
The LED keypad includes up to 35 lights and a built-in electronic sounder.
These provide specific information relating to the status of the security
system which is described in the booklet. Understanding what the lights and
sounds mean will help you to easily operate your system.

Keep in mind, the level of security you will obtain with this system
relates specifically with two major factors:

1. The quantity, quality and placement of security devices attached to
this system.

2. The knowledge you have of the security system and how that
knowledge is utilized in a weekly test of the complete system.

You should be aware of the following facts when preparing a
safety/security plan for your home/business.

 Your security system is an electronic device and is subject to failure or

malfunction. Do not rely on it as your single source of security.

 Your system should be tested weekly.
 Your system will not work without power.
 Warning devices will need to be loud enough, wired correctly, and

properly placed to provide notification of an alarm event.

 Smoke and heat detectors may not detect heat and smoke in all

situations.

 Use qualified security professionals to install and maintain your security

system.

 It may be possible to arm the security system without the backup battery

connected. Your periodic test should be done with AC Power removed to
verify the battery is connected and adequately charged.

 Care should be taken to plug in and restrain the AC Transformer after

testing.

Please read the following information and instructions carefully
before operating your security control system.

Page 2

TABLE OF CONTENTS

TABLE OF CONTENTS.......................................................3

GLOSSARY OF TERMS......................................................4

UNDERSTANDING THE LIGHTS ......................................5

ARMED LIGHT................................................................................ 5

BYPASS LIGHT............................................................................... 5

CANCEL LIGHT............................................................................... 5

CHIME LIGHT ................................................................................ 5

EXIT LIGHT ................................................................................... 5

FIRE LIGHT ................................................................................... 5

INSTANT LIGHT ............................................................................. 6

POWER LIGHT ............................................................................... 6

READY LIGHT ................................................................................ 6

STAY LIGHT .................................................................................. 6

ZONE LIGHT.................................................................................. 6

EMERGENCY ACTIVATION KEYS.....................................7

KEYPAD FUNCTIONS .......................................................7

ARMING YOUR SYSTEM IN THE “AWAY” MODE................................... 7

ARMING YOUR SYSTEM IN THE “STAY” MODE.................................... 8

USING THE QUICK ARM (Optional, see page 1)................................. 9

CHANGING MODES WHILE SYSTEM IS ARMED................................... 9

DISARMING THE SYSTEM................................................................ 9

CANCEL / ABORT FEATURE (Optional, see page 1) ............................ 9

BYPASSING ZONES .......................................................................12

GROUP BYPASS ............................................................................12

UNBYPASSING..............................................................................12

TURNING THE DOOR CHIME ON AND OFF ........................................12

ADDING AND CHANGING USER CODES.......................13

ASSIGNING USER CODE AUTHORITY LEVELS ............13

OTHER KEYPAD FUNCTIONS.........................................15

SETTING THE KEYPAD TONE...........................................................15

VIEW ALARM MEMORY...................................................................15

TEST FUNCTION – Optional ............................................................15

RESET FUNCTION..........................................................................16

SET SYSTEM DATE ........................................................................16

SETTING THE SYSTEM CLOCK.........................................................16

SETTING THE KEYPAD LIGHTING ....................................................17

KEYPAD CONTROL TONES (BEEPS) .............................18

EMERGENCY EVACUATION PLANS ...............................19

Page 3

GLOSSARY OF TERMS

Abort Delay An option that allows a delay in reporting to the

central station.

Authority Level The level of access an individual has when using an

alarm panel.

Central Station The location where alarm data is sent during an

alarm report.

Chime Feature An option that allows the keypad to sound a ding-

dong whenever an entry/exit door is opened.

Codes Can be either User Codes (relating to a person) or

Function Codes (a toggle switch to turn specific
functions on/off). NOTE: A system may have either
99 four-digit codes or 66 six-digit codes, but not a
mixture of the two.

Duress Code An option that allows a special code to be sent to the

central station that indicates the alarm system is
being operated under duress.

Forced Arming An option that allows the system to be turned on

(ARMED) with one or more zones open. A system
that is ready to be “force armed” will flash the ready
light. (Note: Those zones that are not ready will not
create an alarm.)

Function Code A Function Code is either a four- (4) or six- (6) digit

code that has been programmed by the installer to
operate a device.

Group Bypass An option that allows the user to bypass multiple

zones with a single operation.

Instant/Delay An option that allows an instant alarm condition for

Entry/Exit doors, or grants a delay to allow someone
to enter/exit the building without an alarm, or before
entering a user code to disarm.

Master Code A master arm/disarm code that can program other

user codes.

Partitioned System A system divided into multiple areas in which its own

user or users control each area.

Perimeter The outer edge of the protected area.

Page 4

Quick Arm An option that allows you to turn on (ARM) the

security system by pressing either the [STAY] or
[EXIT] key on the keypad control (for ARMING only)
as programmed by the installing company.

User Code A four- (4) or six- (6) digit entry code used to arm or

disarm the system.

UNDERSTANDING THE LIGHTS

ARMED LIGHT

The armed light is “on” when the system is armed. The armed light is
“off” when it is disarmed. The armed light will flash when there has been
an alarm during the previous arm cycle.

BYPASS LIGHT

The bypass light is “on” when any zone in this keypad’s partition is
bypassed. The zone(s) that is bypassed will also be illuminated. If the
bypass light is “off”, no zones are bypassed.

CANCEL LIGHT

The cancel light will flash during an abort delay time. If a code is entered
followed by the [CANCEL] key while this light is flashing, all abortable
reports will stop the communication process. Note: The abort feature
must be enabled. Entering a code followed by the [CANCEL] key during
or after an alarm report to the central station will cause the cancel light to
come on. It will stay on until the central station has received the cancel
report. Note: The cancel feature must be enabled.

CHIME LIGHT

The chime light is “on” when the chime feature is “on”; “off” otherwise.

EXIT LIGHT

The exit light is “on” dur ing the exit delay. Please note that the light will
flash during the last 10 seconds of the exit delay as a warning that the
time is running out. (The user may want to disarm the system if the exit
light is flashing in order to prevent an alarm. The user may then re-arm
the system and exit before the delay expires.)

FIRE LIGHT

A steady fire light means a fire zone has been faulted. A rapidly flashing
fire light means that a fire zone is in a trouble condition.

Page 5