U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED
RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo
Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this
Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer
Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14
(Alternate III).
This notice is a supplementary document of the ThinkPad
Please read this document before you use the ThinkPad X60 Series computer.
The ThinkPad X60 Series computer complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Yo u must install and use your
ThinkPad computer in strict accordance with the instructions as described hereafter.
Avis de réglementation pour les ThinkPad X60 Series
Leprésentavisestundocumentquivientcompléterle ThinkPad X60Series - Guidedemaintenanceet
d’identification des incidents. Veuillez lire ce document avant d’utiliser l’ordinateur ThinkPad X60 Series.
L’ordinateur ThinkPad X60 Series est conforme aux normes de sécurité et de radiofréquence du pays ou
de la région où son utilisation sans fil est agréée. Vous devez installer et utiliser votre ordinateur
ThinkPad en respectant scrupuleusement les instructions décrites ci-après.
There is no FCC ID for Mini PCI Express Card shown on the enclosure of your ThinkPad computer.
Instead you will find an indicator pointing to the location of the FCC ID on the bottom side of your
ThinkPad computer as shown in the figure below. The FCC ID is affixed on the approved module
installed in the Mini PCI Express Card slot.
If no integrated wireless LAN Mini PCI Express Card has been preinstalled in your ThinkPad computer,
you can install one, provided by Lenovo as an option. Plug the wireless card option into the Mini PCI
Express Card slot located under the palmrest of your ThinkPad computer as shown below.
Attention: The ThinkPadX60Seriescomputercontainsanauthenticationmechanism
If
ThinkPad X60 Series computer, the computer will not start, but only displays an error message and
emits beeps.
iii) The FCC RF safety requirement
®
4 ThinkPad
X60 Series Regulatory Notice
The radiated output power of the Wireless LAN Mini PCI Express Card authorized to use for the
ThinkPad X60 Series computer is far below the FCC radio frequency exposure limits. Nevertheless, the
ThinkPad X60 Series computer shall be used in such a manner that the potential for human contact
during normal operation is minimized as follows:
Caution: To comply with FCC RF exposure compliance requirements, a separation distance of at least
20 cm (8 inches) must be maintained between the antenna for the integrated Wireless LAN Mini PCI
Express Card built in to the screen section and all persons. Yo u are not allowed to disable “standby
mode” for the power management function, if you cannot maintain the sufficient antenna separation
(at least 20 cm) in any case the LCD is left opened or closed.
Model: AR5BXB6
Model: WM3945ABG
USA — Federal Communications Commission (FCC) 5
Note: The transmissiondiversityfunctionisimplementedforthecards.Thefunctiondoesnotemit
radio frequencies simultaneously from both antennas. One of the antennas is selected
automatically or manually (by users) to have good quality of radiocommunication.
iv) Radio Frequency interference requirements
v The deviceshavebeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice
pursuant to FCC Part 15 Subpart B. The model AR5BXB6 was subject to DoC. Refer to “Electronic
emission notices” on page 15.
The
model WM3945ABG includes all compliances of Part 15 Subpart B, C and E.
v Each deviceisrestrictedtoindooruseduetoitsoperationinthe5.15to5.25GHzfrequencyrange.
FCC requires these products to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile Satellite systems.
v High powerradarareallocatedasprimaryusersofthe5.25to5.35GHzand5.65to5.85GHzbands.
These radar stations can cause interference with and/or damage this device.
regarding FCC Part 15 Subpart B and an intentional radiator regarding FCC Part 15 Subpart C. The FCC
ID includes both certifications of Part 15 Subpart B and C.
i) FCC ID and installation of the module
If you find the FCC ID “MCLJ07H081” on the label at the bottom side of your computer, your computer
integrates the Bluetooth transmitter module (Model: J07H081). The Bluetooth module is preinstalled by
Lenovo, and is not removable by users. If your card requires replacement via the proper steps shown in
“Chapter 3. Getting help and service” of the ThinkPad X60 Series Service and Troubleshooting Guide,
Lenovo will request you to send your computer with the card to Lenovo so that Lenovo will repair it.
ii) The FCC RF safety requirement
The Bluetooth module “J07H081” and its built-in antenna are located near the left hinge of the computer
lid. The radiated output power of the Bluetooth module is far below the FCC radio frequency exposure
limits. Therefore, a 20 cm of separation between the Bluetooth antenna and human body is not required.
®
6 ThinkPad
X60 Series Regulatory Notice
Built-in
Bluetooth
antenna
III. Pre-installed integrated Wireless WAN adapter
v FCC ID: N7N-MC5720 (Model: MC5720)
i) FCC ID and installation of the module
If you find the FCC ID “N7N-MC5720” on the label at the bottom side of your ThinkPad computer, your
computer integrates the Wireless WAN (EVDO) transmitter module (Model: MC5720). The Wireless
WAN module is preinstalled by Lenovo, and is not removable by users. If your card requires
replacement via the proper steps shown in “Chapter 3. Getting help and service” of the ThinkPad X60 SeriesServiceandTroubleshootingGuide, Lenovowillrequestyoutosendyourcomputerwiththecardto
Lenovo so that Lenovo will repair it.
ii) RF safety compliance
The transmission antenna used for the Wireless WAN (EVDO) adapter in this notebook computer is
located at the upper right portion of the LCD screen. The total radiated energy from all the antennas
connected to the Wireless WAN adapter (Model: MC5720), the Wireless LAN Mini PCI express adapter
(Model: AR5BXB6 or WM3945ABG), and the Bluetooth module (Model: J07H081) conforms to the FCC
limit of the SAR (Specific Absorption Rate) requirement regarding 47 CFR Part 2 section 1093. The
maximum SAR values measured for the ThinkPad X60 Series computer were 0.084W/Kg at 800MHz
band and 0.096W/Kg at 1.9GHz band. (The limit is 1.6W/Kg.)
USA — Federal Communications Commission (FCC) 7
Model: MC5720
iii) Emergency Calls
The EVDO modules embedded in the ThinkPad X60 Series do not support voice calls, hence their use
for essential communication is not possible, including emergency calls regarding the E911 rule.
iv) Radio Frequency interference requirements
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
FCC Part 15 Subpart B, and is subject to DoC. Refer to “Electronic emission notices” on page 15.
8 ThinkPad
®
X60 Series Regulatory Notice
IV. Simultaneous use of RF transmitters
Your ThinkPad computer is approved for simultaneous use of the three transmitters listed below:
v Wireless WAN EVDO adapter (FCC ID: N7N-MC5720)
v Wireless LAN adapter (FCC ID: PPD-AR5BXB6 or PD9LEN3945ABG)
The certification number of Industry Canada for the approved Mini PCI Express wireless card is affixed
on the module installed in the Mini PCI Express Card slot as shown below.
adapter that is not approved for use in the ThinkPad X60 Series computer, the computer will not start,
but only displays an error message and emits beeps.
ii) Pre-installed integrated Bluetooth module
v IC: 2878D-J07H081(Model:J07H081)
If
youfindanindication“ContainsTransmitter Module: Canada IC: 2878D-J07H081” on the label at the
bottom side of your computer, your computer integrates the Bluetooth transmitter module. The
Bluetooth module is preinstalled by Lenovo, and is not removable by users. If your card requires
replacement via the proper steps shown in “Chapter 3. Getting help and service” of the ThinkPad X60 SeriesServiceandTroubleshootingGuide, Lenovowillrequestyoutosendyourcomputerwiththecardto
Lenovo so that Lenovo will repair it.
Low power license-exempt radiocommunication devices (RSS-210)
Operation is subject to the following two conditions:
The
Series, and having a maximum gain of within 3 dBi.
The maximum antenna gain permitted for devices in the 5250-5350 MHz and 5725-5785 MHz bands
complies with the e.i.r.p. limit in section A9.2(3) of RSS-210.
When you use the model AR5BXB6 or WM3945ABG:
v The devicefortheband5150–5250MHzisonlyforindoorusagetoreducepotentialforharmful
interference to co-channel Mobile Satellite systems.
v High powerradarsareallocatedasprimaryusers(meaningtheyhavepriority)of5250–5350MHz
and 5650–5850 MHz and these radars could cause interference and/or damage to LELAN
(Licence-Exempt Local Area Network) devices.
Exposure of humans to RF fields (RSS-102)
ThinkPad X60 Series computers employ low gain integral antennas that do not emit RF field in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s
Web site at www.hc-sc.gc.ca/rpb
prennent pas en charge les canaux étendus (12ch, 13ch) et ne fonctionnent donc pas sur de tels canaux.
Le numéro d’homologation d’Industrie Canada pour la carte sans fil Express mini-PCI homologuée est
indiqué sur le module installé dans l’emplacement réservé à la carte Express mini-PCI, comme illustré
ci-dessous.
bas de votre ordinateur, cela signifie que ce dernier intègre le module de transmission Bluetooth. Le
module Bluetooth est préinstallé par Lenovo et ne peut pas être retiré par les utilisateurs. Si votre carte
doit être remplacée conformément aux étapes du Chapitre 3 relatif à l’aide et la maintenance dans le
manuel ThinkPad X60 Series - Guide de maintenance et d’identification des incidents, Lenovo vous
demandera de lui envoyer votre ordinateur accompagné de la carte pour réparation.
Remarque relative aux appareils de communication radio de faible puissance sans licence
(CNR-210)
Le fonctionnement de ce type d’appareil est soumis aux deux conditions suivantes:
v Tout appareildestinéàlabande5150-5250MHzdevraêtreexclusivementutiliséenintérieurafinde
réduire les risques de perturbations électromagnétiques gênantes sur les systèmes de satellite mobile
dans un même canal.
v Les radarsàfortepuissancesontdésignéscommelesutilisateursprincipaux(c’est-à-direqu’ilssont
prioritaires) des bandes 5250-5350 MHz et 5650-5850 MHz. Ils peuvent provoquer des perturbations
électromagnétiques sur les appareils de type LELAN (réseau de communication local sans licence) ou
les endommager.
Exposition des êtres humains aux champs radioélectriques (RF) (CNR-102)
Le ThinkPad X60 Series utilise des antennes intégrales à faible gain qui n’émettent pas un champ
électromagnétique supérieur aux normes imposées par le Ministére de la santé canadien pour la
population. Consultez le Safety Code 6 sur le site Web du Ministére de la santé canadien à l’adresse
“www.hc-sc.gc.ca/rpb”.
and J07H081 were proceeded by certification under each respective FCC
ID: PD9WM3945ABG and MCLJ07H081.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
v Reorient or relocate the receiving antenna.
v Increase the separation between the equipment and receiver.
v Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
v Consult anauthorizeddealerorservicerepresentativeforhelp.
Lenovo is not responsible for any radio or television interference caused by
unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Lenovo (United States) Inc.
One Manhattanville Road
Purchase, New York 10577
any person to use a computer or other electronic device to send any
message via a telephone fax machine unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on
the first page of the transmission, the date and time it is sent, and an
identification of the business or other entity, or other individual sending
the message and the telephone number of the sending machine or such
business, other entity, or individual.
In order to program this information into your computer, you should be
sure to follow the installation instructions for your fax software package.
requirements adopted by the ACTA. On this equipment is a label that
contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. The
REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without
a decimal point (e.g., 03 is a REN of 0.3).
telephone company may discontinue your service temporarily. If possible,
they will notify you in advance. But, if advance notice isn’t practical, you
will be notified as soon as possible. Yo u will be advised of your right to
file a complaint with the FCC.
5.Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of your
equipment. If they do, you will be given advance notice so as to give you
an opportunity to maintain uninterrupted service.
Authorized Seller, or the Customer Support Center. For the most current
phone numbers, go to http://www.lenovo.com/think/support and click
Support phone list. The telephone company may ask you to disconnect
with this equipment, contact your Lenovo Authorized Seller, or the
Customer Support Center. For the most current phone numbers, go to
http://www.lenovo.com/think/support and click Support phone list.
company. Connection to party lines is subject to state tariffs. Contact your
state public utility commission or corporation commission for
information.
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See
installation instructions for details.
telephone line, ensure the installation of this Data/Fax Modem does not
disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qualified
installer.
This
Technical Specifications. This is confirmed by the registration number. The
abbreviation, IC, before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of
communication. In some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer should be aware
that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs of alterations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
Caution
Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as
appropriate.
The Ringer Equivalence Number (REN) for the terminal equipment
RD02-D110 is 0.1. The REN assigned to each terminal equipment provides an
indication of the maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed five.
Le présent matériel est conforme aux spécifications techniques d’Industrie
Canada applicables au matériel terminal. Cette conformité est confirmée par le
numéro d’enregistrement. Le sigle IC, placé devant le numéro
d’enregistrement, signifie que l’enregistrement s’est effectué conformément à
une déclaration de conformité et indique que les spécifications techniques
d’Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a
approuvé le matériel.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le
raccorder aux installations de l’entreprise locale de télécommunication. Le
matériel doit également être installé en suivant une méthode acceptée de
raccordement. Dans certains cas, les fils intérieurs de l’entreprise utilisés pour
un service individuel à ligne unique peuvent être prolongés au moyen d’un
dispositif homologué de raccordement (cordon prolongateur téléphonique
interne). L’abonné ne doit pas oublier qu’il est possible que la conformité aux
conditions énoncées ci-dessus n’empechent pas la dégradation du service dans
certaines situations. Actuellement, les entreprises de télécommunication ne
permettent pas que l’on raccorde leur matériel à des jacks d’abonné, sauf dans
les cas précis prévus par les tarifs paticuliers de ces entreprises.
Les réparations de matériel homologué doivent être effectuées par un centre
d’entretien canadien autorisé désigné par le fournisseur. La compagnie de
télécommunications peut demander à l’utilisateur de débrancher un appareil à
la suite de réparations ou de modifications effectuées par l’utilisateur ou à
cause de mauvais fonctionnement.
20 ThinkPad
Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise
à la terre de la source d’énergie électrique, des lignes téléphoniques et des
canalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cette
précaution est particulièrement importante dans les régions rurales.
Avertissement
L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit
avoir recours à un service d’inspection des installations électriques, ou à
électricien, selon le cas.
L’indice d’équivalence de la sonnerie (IES) du présent matériel RD02-D110 est
de 0.1. L’IES assigné à chaque dispositif terminal indique le nombre maximal
de terminaux qui peuvent être raccordés à une interface téléphonique. La
terminaison d’une interface peut consister en une combinaison quelconque de
dispositifs, à la seule condition que la somme d’indices d’équivalence de la
sonnerie de tous les dispositifs n’excède pas 5.
®
X60 Series Regulatory Notice
Other countries
Notice for users in Australia
For model: RD02-D110
following noticeapplieswhen usingthetelephony functions:
The
WARNING: FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A
TELECOMMUNICATIONS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER
EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED.
Notice for users in Brazil
For model: J07H081
For models: AR5BXB6 and WM3945ABG
Portuguese Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário
English This equipment is a secondary type device, that is, it is not
protected against harmful interference, even if the
interference is caused by a device of the same type, and it
also cannot cause any interference to primary type devices.
Notice for users in India
For model: J07H081
ETA-54/2005-WPC
The equipment type approval does not imply that the frequencies will be
cleared automatically/operating licence will be granted as these are matters to
be examined on case by case basis on the receipt of the application to WPC.
The AR5BXB6 equipment is typed approved in India for use of the IEEE
802.11b mode only in indoor applications. All other types of usages require
specific wireless license from Wireless Planning & Coordination (WPC) Wing
of Ministry of Communications and Information Technology of India.
Before using the model AR5BXB6, you must configure the device driver of
your ThinkPad computer for 802.11b only operation. To disable 802.11g.
follow the procedure below:
Users in Indonesia must never configure any channels in the 5Ghz band, it is
strictly forbidden. Due to this restriction, users must only select any channels
on 2.4 Ghz 11Mbps (802.11b) or 2.4Ghz 54 Mbps (802.11g) wireless mode
when configuring their Profile Management with Lenovo Access Connections
program (in any Infrastructure or Adhoc Mode).
grant ofaTelepermitforanyitemofterminalequipmentindicatesonly
The
that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom’s network services.
This equipment is not capable, under all operating conditions, of correct
operation at the higher speeds for which it is designed. Telecom accepts no
responsibility should difficulties arise in such circumstances. This condition
typically applies to 56 kbit/s modems.
This equipment shall not be used in a manner that could constitute a nuisance
to other Telecom customers.
This equipment shall not be set up to make automatic calls to Telecom’s 111
Emergency Service.
Some parameters required for compliance with Telecom’s Telepermit
requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the following
limits for compliance with Telecom’s specifications:
is not less than 5 seconds between the end of one call attempt and the
beginning of another.
Notice for users in the Philippines
For model: J07H081
ESD-0502189C
Notice for users in Singapore
For models: RD02-D110, J07H081, AR5BXB6, and WM3945ABG
24 ThinkPad
For models: J07H081, AR5BXB6, and WM3945ABG
OPERATING CONDITIONS UNDER WHICH THE
RADIOCOMMUNICATION EQUIPMENT ARE EXEMPTED FROM
LICENSING
To maximize frequency sharing while minimizing radio interference, the
following operating conditions are imposed to confine the propagation of
radio signals within a building or at a localised site:
c)
maximum permissible output power designated by IDA to confine the
propagation of radio signals to a small localised area;
d) For an on-site localised operation with little obstruction by the nearby
buildings or terrain, height of any external antenna, if installation approved
®
X60 Series Regulatory Notice
by IDA, shall not be more than 10 metres above ground level to limit the
radio wave propagation; and