Intel IXDP465 User Manual

1.29 Mb
Loading...

Intel® IXDP465 Development

Platform

Quick Start Guide

May 2005

Order Number: 305825, Revision: 002

May 2005

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO SALE AND/OR USE OF INTEL PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel's website at http://www.intel.com.

BunnyPeople, CablePort, Celeron, Chips, Dialogic, DM3, EtherExpress, ETOX, FlashFile, i386, i486, i960, iCOMP, InstantIP, Intel, Intel Centrino, Intel Centrino logo, Intel logo, Intel386, Intel486, Intel740, IntelDX2, IntelDX4, IntelSX2, Intel Inside, Intel Inside logo, Intel NetBurst, Intel NetMerge, Intel NetStructure, Intel SingleDriver, Intel SpeedStep, Intel StrataFlash, Intel Xeon, Intel XScale, IPLink, Itanium, MCS, MMX, MMX logo, Optimizer logo, OverDrive, Paragon, PDCharm, Pentium, Pentium II Xeon, Pentium III Xeon, Performance at Your Command, RemoteExpress, SmartDie, Solutions960, Sound Mark, StorageExpress, The Computer Inside, The Journey Inside, TokenExpress, VTune, and Xircom are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others. Copyright © 2005, Intel Corporation

May 2005

Intel® IXDP465 Development Platform

AN

2

Order Number: 305825, Revision: 002

 

 

 

Intel® IXDP465 Development Platform—Contents

Contents

 

 

1.0

 

Purpose ..........................................................................................................................................

 

5

2.0

Applicable Documents and Revisions ........................................................................................

 

5

3.0

 

Known Issues ................................................................................................................................

 

6

4.0

 

Inspection.......................................................................................................................................

 

6

5.0

Intel® IXDP465 Development Platform Overview........................................................................

 

7

 

 

5.1 Emulation with the Intel® IXDP465 Development Platform...................................................

 

8

6.0

 

Default Switch Settings.................................................................................................................

 

9

7.0

 

Default Jumper Settings .............................................................................................................

 

12

 

 

7.1 Intel® IXDP465 Baseboard Jumpers ..................................................................................

 

12

 

 

7.2 Intel® IXP465 Network Processor/DDR Module Jumpers ..................................................

 

15

 

 

7.3 Intel® IXPETM465 Ethernet PHY Mezzanine Card Jumpers..............................................

 

17

8.0

LCD Display and LED Indicators................................................................................................

 

18

9.0

Preparing the Platform for Initial Use ........................................................................................

 

21

10.0

Starting the Platform ...................................................................................................................

 

21

11.0

Operating the Platform................................................................................................................

 

22

12.0

Technical Support .......................................................................................................................

 

22

Figures

 

 

 

1

Photo of IXDP465 Development Platform Setup for Quick Start Operation .................................

 

8

 

2

Intel® IXDP465 Development Platform Switch Locations...........................................................

 

11

 

3

Intel® IXDP465 Baseboard Jumper Locations............................................................................

 

14

 

4

Intel® IXP465 Network Processor/DDR Module Jumper Locations............................................

 

16

 

5

Intel® IXPETM465 Ethernet PHY Mezzanine Card Jumper Locations.......................................

 

18

 

6

Intel® IXDP465 Development Platform LED Locations ..............................................................

 

20

 

7

LCD Display for Wind River* VxWorks* Bootloader ...................................................................

 

22

Tables

 

 

 

1

Reference Documents ..................................................................................................................

 

5

 

2

Fuse Bit Settings for Network Processor Emulation .....................................................................

 

9

 

3

Intel® IXDP465 Development Platform Switch Descriptions and Default Settings .....................

 

10

 

4

Intel® IXDP465 Baseboard Jumper Descriptions and Default Settings......................................

 

12

 

5

Intel® IXP465 Network Processor/DDR Module Jumper Descriptions and Default Settings......

15

 

6

Intel® IXPETM465 Ethernet PHY Mezzanine Card Jumper Descriptions and Default Settings .17

 

7

Intel® IXDP465 Development Platform LED Descriptions and Default Settings.........................

 

19

 

8

UART Communications Configuration........................................................................................

 

21

AN

 

Intel® IXDP465 Development Platform

May 2005

 

 

Order Number: 305825, Revision: 002

 

3

Intel® IXDP465 Development Platform—Contents

Revision History

Date

Revision

Description

 

 

 

 

 

Text updates for this release include:

 

 

• Added paragraph about using zoom feature to read PDF

 

 

in Section 1.0. (SCR 4282)

 

 

• Added references to Intel® IXDP465 Development

 

 

Platform Specification Update.

 

 

• Added detail to procedure in Section 4.0.

May 2005

002

• Added Section 5.1, “Emulation with the Intel® IXDP465

 

 

Development Platform” on page 8.

 

 

• Clarified default settings for J127 and J128 in Table 4.

 

 

(SCR 4280)

 

 

• Added info about updating flash memory to Section 11.0.

 

 

(SCR 4281)

 

 

• Updated Figures 1-6, replacing line art with board photos.

 

 

 

April 2005

001

Initial release of this document.

 

 

 

May 2005

Intel® IXDP465 Development Platform

AN

4

Order Number: 305825, Revision: 002

 

Quick Start Guide—Intel® IXDP465 Development Platform

1.0Purpose

This document, the Intel® IXDP465 Development Platform Quick Start Guide, contains instructions for unpacking, inspecting, setting up, and starting the Intel® IXDP465 Development Platform.

Before the IXDP465 development platform is powered up for the first time, it is very important to first become familiar with the platform. Therefore, Section 5.0 through Section 8.0 provide the required information for powering up the platform for first time use. These sections provide the following information:

Photo of the IXDP465 development platform setup for Quick Start operation, showing the location of factory-installed mezzanine modules and location of key interfaces to assist with connection of console, Ethernet, and power cables.

Factory default settings of all switches and jumpers, allowing the user to ensure they were not accidentally changed during transport, or repositioned by a previous platform user.

Location and definitions of the LCD display and all the platform LEDs, so that they can be visually monitored for proper power-up and booting.

Instructions for preparing and starting the IXDP465 development platform begin in Section 9.0.

Note: It is highly recommended that a printout of this entire Quick Start Guide is obtained prior to preparing and powering up the platform for the first time. All tables in this Quick Start Guide include checkboxes so that items in the printout can be checked off to insure that all platform switches, jumpers, and LEDs operate in their default state, which will ensure a successful first-time bootup of the platform.

Use the Zoom feature in Adobe* Reader* to optimize viewing of the figure details contained in this document, for example, the switch and jumper locations on the IXDP465 development platform.

Note: If any deviations from the factory default settings of this Quick Start Guide are planned, or for more detailed information about this platform, including design definition of all boards, mezzanine cards, platform components, optional modules, optional switch and jumper settings, and overall development capabilities, please see the Intel® IXDP465 Development Platform User’s Guide.

2.0Applicable Documents and Revisions

The documents referenced below may be obtained online unless noted otherwise.

Table 1.

Reference Documents (Sheet 1 of 2)

 

 

 

 

 

 

 

Title

Document

Location

 

Number

 

 

 

 

 

 

 

 

Intel® IXDP465 Development Platform User’s Guide

306462

Documentation Web Page

 

Intel® IXDP465 Development Platform Specification Update

306509

Intel Representative

 

Intel® IXDP465 Development Platform Documentation Kit

N/A

Documentation Web Page

This document is available at: http://www.intel.com/design/network/products/npfamily/docs/ixp4xx.htm

††This document is available at: http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm

AN

Intel® IXDP465 Development Platform

May 2005

 

Order Number: 305825, Revision: 002

5

Intel® IXDP465 Development Platform—Quick Start Guide

 

 

 

Table 1.

Reference Documents (Sheet 2 of 2)

 

 

 

 

 

 

 

 

 

Title

Document

Location

 

 

Number

 

 

 

 

 

 

 

 

 

 

 

Intel® IXP4XX Product Line of Network Processors

306428

Intel Representative

 

 

Specification Update

 

 

 

 

 

 

 

 

 

 

 

Intel® IXP45X and Intel® IXP46X Product Line of Network

306261

Documentation Web Page

 

Processors Datasheet

 

 

 

 

 

 

 

 

 

 

Intel® IXP45X and Intel® IXP46X Product Line of Network

306262

Documentation Web Page

 

Processors Developer’s Manual

 

 

 

 

Intel® IXP400 Software Release - Software Release Notes

N/A

Software Web Page††

 

 

Intel® IXP400 Software - Software Specification Update

273795

Documentation Web Page

 

Intel® IXP400 Software Programmer’s Guide

252539

Documentation Web Page

This document is available at: http://www.intel.com/design/network/products/npfamily/docs/ixp4xx.htm

††This document is available at: http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm

3.0Known Issues

Known issues are described in the following documents:

Silicon errata: Intel® IXP4XX Product Line of Network Processors Specification Update

Software errata: Intel® IXP400 Software - Software Specification Update

Platform errata: Intel® IXDP465 Development Platform Specification Update

4.0Inspection

Before the contents of the box are unpacked, ensure that all precautions are observed prior to removing Electrostatic Sensitive Device (ESD) assemblies from their protective packaging.

Unpack the contents of the box. After all the components are unpacked, verify that all the items listed in the packing list are present. The packing list is included in the STOP Readme First document shipped with the kit. If any item is missing, refer to Section 12.0, “Technical Support” for instructions.

After verifying all items are present:

Inspect each item for any visible damage.

Inspect the cable connectors to ensure that none of the pins are bent or damaged.

Inspect the overall platform assembly to ensure that all mezzanine cards (modules) are properly seated. This can be done by first ensuring that all four 5/8 inch standoffs and nuts on each corner of the mezzanine cards are not loose. If they appear loose either due to shipping or previous handling, then they need to be re-seated per the following procedure:

a.Remove all four nuts, by hand-turning them in a counter-clockwise direction as viewed from the top of the assembly.

b.Ensure that all four 5/8 inch standoffs are tight, by hand-turning each of them in a clockwise direction while the mezzanine card is still plugged in.

May 2005

Intel® IXDP465 Development Platform

AN

6

Order Number: 305825, Revision: 002

 

Quick Start Guide—Intel® IXDP465 Development Platform

c.Re-seat the mezzanine card into the connector by applying finger pressure from one hand to the top-side of the mezzanine card directly over the connector while applying finger pressure from your other hand to the bottom-side of the base platform directly under the connector.

Caution: Make sure that your fingers on both hands do not press against installed components on the assembly.

d.Verify that the mezzanine card is properly re-seated, by visually confirming there are no gaps between the connectors and no gaps between the four standoffs and the mezzanine card.

e.Replace all four nuts, by hand-turning and tightening them in a clockwise direction.

If any item is damaged or missing, refer to Section 12.0, “Technical Support” for instructions.

Note: A set of extra jumpers is included with the kit. These jumpers are not required for default operation of the platform as described in this manual. The extra jumpers are provided for any deviations from the factory default settings which may be required to support optional platform configurations.

5.0Intel® IXDP465 Development Platform Overview

The IXDP465 development platform is used for development with the Intel® IXP46X Product Line of Network Processors, and consists of:

one Intel® IXDP465 development platform baseboard

one Intel® IXP465 Network Processor/DDR module (defaulted to 533 MHz operation)

one Intel® IXPETM465 MII Ethernet PHY mezzanine card

Both the Intel® IXP465 Network Processor/DDR Module and the Intel® IXPETM465 MII Ethernet PHY Mezzanine card plug into the baseboard. These three separate card assemblies are shipped pre-assembled by the factory and should appear per the photo as shown in Figure 1 on page 8. The IXDP465 development platform also ships with a Intel® PRO/100+ Adapter (packaged separately).

Figure 1 represents the top side view of IXDP465 development platform setup and shows all key interfaces and components. This figure should be compared against the platform that was contained in the box, so that familiarity is gained of all key platform components. The platform should also be viewed from the back side, to observe all provisions for optional mezzanine cards, but if more data is required, please see the Intel® IXDP465 Development Platform User’s Guide.

Figure 1 should also be referenced while preparing the platform for initial use per Section 9.0, to use as a visual aid to validating proper setup of the IXDP465 development platform for Quick Start operation.

AN

Intel® IXDP465 Development Platform

May 2005

 

Order Number: 305825, Revision: 002

7

+ 15 hidden pages