Intel LE-370, LE-370Z User Manual

LE-370/LE-370Z

3.5 Inches Embedded Miniboard

User’s Manual

Edition: 1.0

2005/6/13

LE-370 User’s Manual

Copyright 2004 - 2005. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protected by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All trademarks and/or registered trademarks contains in this document are property of their respective owners.

Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from the performance or use of this product. The company does not issue a warranty of any kind, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose. The company has the right to revise the manual or include changes in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at http://www.commell.com.tw

LE-370 User’s Manual

Packing List:

Please check the package before you starting setup the system

Hardware:

LE-370/LE-370Z motherboard x 1

Cable Kit:

44-pin

44-pin ATA33 IDE Cable x 1

COM port & Printer Port Cable x 1

40-pin

CPU Cooler (LE-370 only)

USB Cable x 1

PS/2 keyboard & mouse cable x 1

Floppy Cable x 1

Audio Cable x 1

Other Accessories:

Divers CD (including User’s Manual) x 1 Printed User’s Manual x 1

Packing List

1 to 3 power output cable

LE-370 User’s Manual

Index

Chapter 1 <Introduction>..................................................................................7

1.1 <Product Overview>..............................................................................7

1.2 <Product Specification>........................................................................8

1.3 <Mechanical Drawing>........................................................................10

1.4 <Block Diagram>................................................................................. 11

Chapter 2 <Hardware Setup>..........................................................................13

2.1 <Connector Location>.........................................................................13

2.2 <Jumper Location & Reference>........................................................14

2.3 <Connector Reference>......................................................................15

2.3.1 <Internal Connector>...............................................................15

2.3.2 <External Connector>..............................................................15

2.4 <CPU & Memory Setup>.....................................................................16

2.4.1 <CPU>.....................................................................................16

2.4.2 <Memory> ...............................................................................17

2.4.3 <CPU Cooler Installation>.......................................................18

2.5 <CMOS Setup>...................................................................................19

2.6 <Enhanced IDE & CF interface>.........................................................20

2.7 <Floppy Port>......................................................................................21

2.8 <Ethernet Interface> ...........................................................................22

2.9 <Onboard Display Interface>..............................................................23

2.9.1 <Analog Display Interface>.....................................................23

2.9.2 <Digital Display Interface>.......................................................24

2.10 <Onboard Audio Interface>...............................................................28

2.11 <GPIO Interface>..............................................................................29

2.12 <Power Supply & Fan>.....................................................................30

2.12.1 <Power Input>.......................................................................30

2.12.2 <Power Output> ....................................................................30

2.12.3 <Fan connectors>..................................................................30

LE-370 User’s Manual

2.13 <Switch & Indicator>.........................................................................31

Chapter 3 <System Setup>.............................................................................33

3.1 <Display Configuration>......................................................................33

Chapter 4 <BIOS Setup>.................................................................................35

Appendix A <I/O Port Pin Assignment>.........................................................37

A.1 <IDE Port>..........................................................................................37

A.2 <Floppy Port>.....................................................................................38

A.3 <IrDA Port>.........................................................................................38

A.4 < VGA Port >.......................................................................................38

A.5 <Serial Port>.......................................................................................39

A.6 <LAN Port>.........................................................................................39

A.7 <PS/2 Keyboard & Mouse Port> ........................................................39

A.8 <LPT Port>…………………………………………………………………40

A.9<USB Port>…………………………………………………………………40

Appendix B <Flash BIOS> ..............................................................................42

B.1 BIOS Auto Flash T ool...................................................................42

B.2 Flash Method ...............................................................................42

Appendix C <Hardware Test>.........................................................................44

C.1 <Power Consumption Test>...............................................................44

Contact Information......................................................................................... 45

Packing List

LE-370 User’s Manual

(This Page is Left For Blank)

LE-370 User’s Manual Introduction

Chapter 1 <Introduction>

1.1 <Product Overview>

LE-370/LE-370Z are the 3.5 inches embedded miniboards based on Intel 852GME/GM of

platform, with Intel Pentium M/Celeron M processors supported, onboard VGA, LAN, Audio, USB2.0, CF, LVDS, and mini-PCI to meet the variable applications of users. LE-370Z with onboard Intel Celeron M processor for ultra low po wer can offer the fanless solution for such as medical applications.

Intel 852GME/GM & ICH4 Chipset

The board integrates Intel 852GME/GM and ICH4 chipset, to provide built-in Intel Extreme Graphics Technology, and supports DDR200/266/333 memory up to 1G of capacity.

18/24-bit LVDS LCD interface

The board provides onboard 18/24-bit LVDS LCD interface, supports up to 1600 x 1200 of UXGA high resolution for LE-370, and up to 1400 x 1050 for LE-370Z.

Flexible Extension Interfaces

The board provides one Mini-PCI socket for wireless LAN module, video capture card and IEEE1394 add-on card. The board also provide optional PCI interface with a riser card t o have up to 2 PCI devices.

Product Overview

LE-370 User’s Manual Introduction

1.2 <Product Specification>

General Specification

LE-370 LE-370Z

Form Factor 3.5 inches Embedded Miniboard CPU Intel Pentium M/Celeron M

Package: FC-PGA478 FSB: 400/533MHz

Memory 1 x 184-pin DDR 266/333

SDRAM up to 1GB

ECC memory supported Chipset Intel 852GME and ICH4 Intel 852GM and ICH4 BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS Green Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant Watchdog Timer System reset programmable watchdog timer with 1 ~ 255

sec./min. of timeout value Real Time Clock Intel ICH4 built-in RTC with lithium battery Enhanced IDE Enhanced UltraDMA100 IDE interface supports dual channels

and up to 2 ATAPI devices

One 44-pin IDE connector onboard

Multi-I/O Port

Chipset Winbond W83627HF-AW controller Serial Port One external & one internal RS-232 serial ports USB Port Two Hi-Speed USB 2.0 ports with 480Mbps of transfer rate Parallel Port One bi-direction parallel port with SPP/ECP/EPP mode Floppy Port One slim type Floppy port IrDA Port One IrDA compliant Infrared interface supports SIR K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel GPIO One 8-bit programmable GPIO interface Hardware Monitor

VGA Display Interface

Chipset Intel 852GME/GM built-in Intel Extreme graphics Frame Buffer Intel DVMT with up to 64MB of frame buffer size Display Type CRT, LCD monitor with analog display Connector External DB15 female connector on rear I/O panel

LCD Interface

Chipset Intel 852GME/GM built-in LVDS interface Interface 18/24-bit LVDS interface

Fan speed, CPU temperature and voltage monitoring

12V backlight inverter connector

Embedded Intel Celeron M Ratio: 600MHz FSB: 400MHz 1 x 184-pin DDR 200/266 SDRAM up to 1GB Non-ECC supported

Product Specification

LE-370 User’s Manual Introduction

Ethernet Interface

Controller Intel 82562ET PHY Type 10Base-T / 100Base-TX

auto-switching Fast Ethernet Full duplex, IEEE802.3U compliant

Connector External RJ45 connectors with LED on rear I/O panel

Audio Interface

Chipset REALTEK ALC201A Interface 2 channel 3D audio with Line-in, Line-out and MIC-in Connector External Audio phone jack for Line-out

Onboard audio connector with pin header Onboard CD-IN connector

Expansive Interface

Mini-PCI 1 x 32-bit 5V/3.3V Mini-PCI socket PCI 1 x optional PCI interface supports up to two PCI devices through

riser card

Solid State Disk

DOM IDE1 supports 44-pin DOM (DiskOnModule) CompactFlash 1 x CompactFlash Type 1 socket on solder side

Power and Environment

Power Requirement

DC 12V input

1 x DC jack on I/O panel or 1 x 4-pin DC connector onboard Dimension 154 (L) x 101 (H) mm Temperature Operating within 0 ~ 60oC (32 ~ 140oF)

Storage within -20 ~ 85

C (-4 ~ 185oF)

Software support

Operation System

Windows 98SE/ME, Windows 2000, Windows XP

Linux (Fedora Core 1, Mandrake 9.2 and Red Hat 9.0)

Linux Kernel version 2.4 or later

Ordering Code

LE-370 Intel Pentium M/Celeron M with socket479, VGA, AC97 Audio,

LVDS, CF, PCI, Mini-PCI, 2 x RS232, LAN,

LE-370Z Same with above but with onboard Intel Celeron M 600 processor

1. The specifications may be different as the actual production. For further product information please visit the website at

http://www.commell.com.tw

Product Specification

LE-370 User’s Manual Introduction

1.3 <Mechanical Drawing>

Mechanical Drawing

LE-370 User’s Manual Introduction

1.4 <Block Diagram>

Intel Pentium M processor with FC-PGA2/FC-BGA2

CRT/LCD Monitor

LVDS

2 x USB2.0 Ports

82562ET PHY

AC97 Codec

2 x Serial ports

1 x Floppy ports

1 x 184-pin DDR DIMM up to 1GB

852GME/GM

PCI

ICH4

Mini-PCI

BIOS

8-bit GPIO

IrDA

1 x Parallel port

Block Diagram

LE-370 User’s Manual

(This Page is Left for Blank)

LE-370 User’s Manual Hardware Setup

Chapter 2 <Hardware Setup>

2.1 <Connector Location>

CN_COM2 AUDIO COM1 CDIN CRT CN_INV RJ45 PS2 DC_IN

CN_12V

CN_USB

CN_AUDIO

CN_DIO

LPT

CN_LVDS

MINIPCI

CN_SPWR

CPUFAN

SYSFAN

DIMM

CN_IR IDE1 JFRNT FDD

Connector Location

LE-370 User’s Manual Hardware Setup

2.2 <Jumper Location & Reference>

Jumper Function

JRTC CMOS Operating/Clear Setting JVLCD LCD panel voltage setting

JVLCD

JRTC

Jumper Location & Reference

+ 31 hidden pages