Intel D510MO User Manual

4.36 Mb
Loading...

Intel® Desktop Board D510MO

Product Guide

Order Number: E74518-001

Revision History

Revision

Revision History

Date

-001

First release of the Intel® Desktop Board D510MO Product

September 2009

 

Guide

 

 

 

 

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124, 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment.

Tested to comply with FCC standards for home or office use.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada.

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Intel Desktop Board D510MO may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, the Intel logo, and Intel Atom are trademarks of Intel Corporation in the U. S. and other countries. * Other names and brands may be claimed as the property of others.

Copyright © 2009 Intel Corporation. All rights reserved.

Preface

This Product Guide gives information about board layout, component installation, and regulatory requirements for Intel® Desktop Board D510MO.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Intended Uses

All Intel® Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows:

1Desktop Board Features: a summary of product features

2Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components

3Updating the BIOS: a description of how to update the BIOS

ABIOS Error Messages: information about BIOS error messages and beep codes

BRegulatory Compliance: safety and EMC regulations and product certifications

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

iii

Intel Desktop Board D510MO Product Guide

Terminology

The table below gives descriptions to some common terms used in the product guide.

Term

Description

 

 

GB

Gigabyte (1,073,741,824 bytes)

 

 

GHz

Gigahertz (one billion hertz)

 

 

KB

Kilobyte (1024 bytes)

 

 

MB

Megabyte (1,048,576 bytes)

 

 

Mbit

Megabit (1,048,576 bits)

 

 

MHz

Megahertz (one million hertz)

 

 

iv

Contents

 

1

Desktop Board Features

 

 

Desktop Board Components.................................................................................

11

 

Processor..........................................................................................................

13

 

System Memory.................................................................................................

13

 

Integrated Graphics Subsystem ...........................................................................

14

 

Intel® NM10 Express Chipset ...............................................................................

14

 

Operating System Support ..................................................................................

14

 

Onboard Audio Subsystem ..................................................................................

14

 

Legacy Input/Output (I/O) Controller ....................................................................

16

 

LAN Subsystem .................................................................................................

16

 

USB 2.0 Support ................................................................................................

17

 

SATA Interface ..................................................................................................

17

 

Expandability.....................................................................................................

17

 

BIOS................................................................................................................

18

 

PCI/PCI Express Auto Configuration ..............................................................

18

 

Security Passwords.....................................................................................

18

 

Power Management Features ...............................................................................

19

 

ACPI.........................................................................................................

19

 

Hardware Support ......................................................................................

19

 

ENERGY STAR*, e-Standby, and ErP Compliance ....................................................

22

 

Battery.............................................................................................................

22

 

Real-Time Clock.................................................................................................

22

2

Installing and Replacing Desktop Board Components

 

 

Before You Begin ...............................................................................................

23

 

Installation Precautions.......................................................................................

25

 

Prevent Power Supply Overload ....................................................................

25

 

Observe Safety and Regulatory Requirements.................................................

25

 

Installing the I/O Shield ......................................................................................

26

 

Installing and Removing the Desktop Board ...........................................................

27

 

Installing and Removing Memory..........................................................................

27

 

Installing DIMMs ........................................................................................

28

 

Removing DIMMs........................................................................................

30

 

Connecting SATA Drives......................................................................................

30

 

Installing a Wireless LAN Card in the PCI Express Full-Mini Card Slot .........................

32

 

Installing an Intel® Z-U130 USB Solid-State Drive (or Compatible Device)..................

33

 

Connecting to the Internal Headers ......................................................................

34

 

Connecting the Front Panel Audio Header.......................................................

35

 

Connecting to the S/PDIF Header..................................................................

36

 

Connecting to the Serial Headers ..................................................................

36

 

Connecting to the Parallel Port Header...........................................................

36

 

Connecting to the Front Panel Wireless Activity LED Header..............................

37

 

Connecting to the Front Panel Header............................................................

38

 

Connecting to the Front Panel USB 2.0 Headers ..............................................

38

 

Connecting a Chassis Fan....................................................................................

39

 

Connecting the Power Supply Cable ......................................................................

40

v

Intel Desktop Board D510MO Product Guide

 

 

Setting the BIOS Configuration Jumper .................................................................

41

 

Clearing Passwords.....................................................................................

42

 

Replacing the Battery .........................................................................................

43

3

Updating the BIOS

 

 

Updating the BIOS with the Intel® Express BIOS Update Utility.................................

49

 

Updating the BIOS with the Iflash Memory Update Utility.........................................

50

 

Obtaining the BIOS Update File ....................................................................

50

 

Using the Iflash Memory Update Utility ..........................................................

50

 

Recovering the BIOS...................................................................................

51

A

Board Status and Error Messages

 

 

BIOS Beep Codes...............................................................................................

53

 

BIOS Front-panel Power LED Blink Codes ..............................................................

54

 

POST Error Messages..........................................................................................

54

B

Regulatory Compliance

 

 

Safety Standards ...............................................................................................

55

 

Place Battery Marking .................................................................................

55

 

European Union Declaration of Conformity Statement..............................................

56

 

Product Ecology Statements ................................................................................

57

 

Recycling Considerations .............................................................................

57

 

Lead-free 2LI/Pb-free 2LI Board ...................................................................

60

 

Restriction of Hazardous Substances (RoHS) ..................................................

61

 

EMC Regulations ................................................................................................

63

 

Ensure Electromagnetic Compatibility (EMC) Compliance..................................

64

 

Product Certifications..........................................................................................

65

 

Board-Level Certification Markings ................................................................

65

 

Chassis and Component Certifications............................................................

66

vi

 

 

Contents

Figures

 

1.

Intel Desktop Board D510MO Components .......................................................

11

2.

Back Panel Audio Connectors .........................................................................

15

3.

LAN Status LEDs ..........................................................................................

16

4.

Location of the Standby Power Indicator ..........................................................

20

5.

Installing the I/O Shield ................................................................................

26

6.

Intel Desktop Board D510MO Mounting Screw Holes..........................................

27

7.

Use DDR2 DIMMs .........................................................................................

28

8.

Installing a DIMM .........................................................................................

29

9.

Connecting the Serial ATA Cable .....................................................................

31

10.

Installing a Wireless LAN Card........................................................................

32

11.

Installing an Intel Z-U130 USB Solid-State Drive (or Compatible Device)..............

33

12.

Internal Headers ..........................................................................................

34

13.

Location of the Chassis Fan Header .................................................................

39

14.

Connecting a Power Supply Cable ...................................................................

40

15.

BIOS Configuration Jumper Block....................................................................

41

16.

Removing the Battery ...................................................................................

47

17.

Intel Desktop Board D510MO China RoHS Material Self Declaration Table .............

62

Tables

 

1.

Feature Summary..........................................................................................

9

2.

Intel Desktop Board D510MO Components .......................................................

12

3.

Audio Jack Support .......................................................................................

15

4.

LAN Status LEDs ..........................................................................................

17

5.

ENERGY STAR Requirements ..........................................................................

22

6.

Front Panel Audio Header for Intel HD Audio.....................................................

35

7.

Front Panel Audio Header for AC ‘97 Audio .......................................................

35

8.

S/PDIF Header .............................................................................................

36

9.

Serial Port Headers (COM 1 and COM 2) ..........................................................

36

10.

Parallel Port Header ......................................................................................

36

11.

Front Panel Wireless Activity LED Header .........................................................

37

12.

Front Panel Header Signal Names ...................................................................

38

13.

Front Panel USB Header ................................................................................

38

14.

Front Panel USB Header with Intel Z-U130 USB Solid-State Drive

 

 

(or Compatible Device) Support......................................................................

39

15.

Jumper Settings for the BIOS Setup Program Modes..........................................

42

16.

AcceptableDrives/Media Types for BIOS Recovery .............................................

51

17.

BIOS Beep Codes .........................................................................................

53

18.

BIOS Front-panel Power LED Blink Codes .........................................................

54

19.

POST Error Messages ....................................................................................

54

20.

Safety Standards..........................................................................................

55

21.

Lead-Free Second Level Interconnect Marks .....................................................

60

22.

China RoHS Environmentally Friendly Use Period Mark .......................................

61

23.

EMC Regulations...........................................................................................

63

24.

Product Certification Markings ........................................................................

65

vii

Intel Desktop Board D510MO Product Guide

viii

1 Desktop Board Features

This chapter briefly describes the main features of Intel® Desktop Board D510MO. Table 1 summarizes the features of the Desktop Board.

Table 1. Feature Summary

Form Factor

Mini-ITX ([170 millimeters [6.7 inches] x 170 millimeters [6.7 inches])

Processor

Passively-cooled, soldered-down dual-core Intel® Atomprocessor with

 

integrated graphics and memory controllers.

Main Memory

Two 240-pin Double Data Rate 2 (DDR2) Dual Inline Memory Module

 

 

(DIMM) sockets with gold-plated contacts

 

Support for DDR2 800 MHz and DDR2 667 MHz DIMMs

 

Support for up to 4 GB total system memory (2 GB per DIMM

 

 

socket)

Chipset

Intel® NM10 Express Chipset

Integrated

Intel® Graphics Media Accelerator 3150 (Intel® GMA 3150) integrated

Graphics

graphics subsystem with support for analog displays (VGA)

Audio

RealTek* ALC662 audio codec for 5.1 (6-channel) Intel® High

 

Definition Audio (Intel® HD Audio) and AC ’97 Audio. Included are:

 

Back panel connectors

 

Front panel microphone/headphone header with support for

 

 

Intel® HD Audio or AC ’97 Audio

 

S/PDIF digital audio header

Expansion

One PCI* bus add-in card connector

Capabilities

One PCI Express* Full-Mini Card slot

Peripheral

Seven USB 2.0 ports:

Interfaces

 

―Four back panel ports

 

 

―Three front panel ports (via two internal headers; one header

 

 

supports an Intel® Z-U130 USB Solid-State Drive (or compatible

 

 

device)

 

Two Serial ATA (SATA) 3.0 Gb/s connectors (supporting IDE and

 

 

ACHI)

Legacy I/O Control

Winbond* W83627TGH-I legacy I/O controller:

 

Two serial port headers

 

One parallel port header

 

PS/2 keyboard and mouse connectors

Hardware Monitor

Hardware monitoring through the Winbond legacy I/O controller,

Subsystem

including:

 

Remote thermal sensor

 

One 3-pin chassis fan header with speed control

LAN Support

10/100/1000 Mb/s (Gigabit) Ethernet LAN Subsystem using a RealTek*

 

8111DL Gigabit Ethernet Controller

9

Intel Desktop Board D510MO Product Guide

BIOS

Intel® BIOS

 

Support for Advanced Configuration and Power Interface (ACPI),

 

 

Plug and Play, and SMBIOS

Instantly Available

Support for PCI Local Bus Specification, Revision 2.3

PC Technology

Support for Advanced Configuration and Power Interface (ACPI)

 

Wake on USB, PCI, PCI Express, PS/2, LAN, serial, and front panel

For more information on Intel Desktop Board D510MO consult the following online resources:

To find information

Visit this World Wide Web site:

about…

 

Intel Desktop Board

http://www.intel.com/products/motherboard/D510MO/index.htm

D510MO

 

Desktop Board Support

http://support.intel.com/support/motherboards/desktop

Available configurations

http://www.intel.com/products/motherboard/D510MO/index.htm

for Intel Desktop Board

 

D510MO

 

Chipset information

http://www.intel.com/products/desktop/chipsets/index.htm

BIOS and driver updates

http://downloadcenter.intel.com/

Integration information

http://www.intel.com/support/go/buildit

10

Desktop Board Features

Desktop Board Components

Figure 1 shows the location of the major components on Intel Desktop Board D510MO.

Figure 1. Intel Desktop Board D510MO Components

11

Intel Desktop Board D510MO Product Guide

Table 2. Intel Desktop Board D510MO Components

Label

Description

 

 

A

Back panel connectors

 

 

B

Serial header (COM1)

 

 

C

Parallel port header

 

 

D

Serial port (COM 2)

 

 

E

Chassis fan header

 

 

F

Main power connector

 

 

G

Standby power indicator

 

 

H

Processor

 

 

I

Channel A DIMM 0

 

 

J

Channel A DIMM 1

 

 

K

SATA 1

 

 

L

SATA 0

 

 

M

Front panel header

 

 

N

Battery

 

 

O

Front panel wireless activity LED header

 

 

P

Intel NM10 Express Chipset

 

 

Q

USB front panel header with Intel Z-U130 USB Solid-State Drive (or

 

compatible device) support

 

 

R

PCI bus connector

 

 

S

PCI Express Mini Card connector

 

 

T

USB front panel header

 

 

U

Front panel audio header

 

 

V

BIOS configuration jumper block

 

 

W

S/PDIF header

 

 

12

Desktop Board Features

Processor

Intel Desktop Board D510MO includes a passively-cooled, dual-core Intel Atom processor with integrated graphics and memory controller. The processor is soldered to the Desktop Board and is not customer upgradeable.

NOTE

The board is designed to be passively cooled in a properly ventilated chassis. Chassis venting locations are recommended above the processor heatsink area for maximum heat dissipation effectiveness.

System Memory

NOTE

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

The Desktop Board has two 240-pin DDR2 DIMM connectors with gold-plated contacts. It supports:

DDR2 800 MHz or DDR2 667 MHz unbuffered, non-registered DIMMs

Serial Presence Detect (SPD) memory only

Non-ECC memory

Up to 4 GB of memory

13

Intel Desktop Board D510MO Product Guide

Integrated Graphics Subsystem

The integrated Intel GMA 3150 graphics controller features the following:

400 MHz core frequency

High quality texture engine

DX9.0c* and OpenGL* 1.4 compliant

Hardware Pixel Shader 2.0

Vertex Shader Model 2.0

3D Graphics Rendering enhancements

1.6 dual texture GigaPixel/s max fill rate

16-bit and 32-bit color

Vertex cache

Video

Software DVD at 30 fps full screen

DVMT support up to 256 MB

Supports analog displays up to 2048 x 1536 at 75 Hz refresh (QXGA)

Intel® NM10 Express Chipset

The Intel NM10 Express Chipset is a centralized controller for the board’s I/O paths. For more information about the Intel NM10 Express Chipset, go to http://www.intel.com/products/chipsets/index.htm?iid=prod+prod_chipset.

Operating System Support

The following Microsoft* operating systems are fully supported by the Desktop Board:

Microsoft Windows Vista* Home Basic, SP 1

Microsoft Windows* XP Home, SP 3

Microsoft Windows* 7 Home Basic and Starter

Onboard Audio Subsystem

The Intel Desktop Board D510MO 6-channel (5.1) onboard audio subsystem supports both Intel HD Audio and AC ’97 Audio. The subsystem is based on the following components:

Intel NM10 Express Chipset

RealTek ALC662 audio codec

The subsystem includes the following headers and connectors:

Front panel audio header (supports both Intel HD Audio and AC ’97) , including functionality for:

Line out (headphones/speaker)

Microphone in

Three back panel analog audio jacks

Onboard S/PDIF output header (3 pin)

14

Desktop Board Features

The front/back panel audio connectors are configurable through the audio device drivers. Table 3 lists the supported functions of the front panel and back panel jacks.

Table 3. Audio Jack Support

Audio Jack

Line

Line/

Rear Out

Center/

Microphone

Headphones

 

In

Front Out

 

LFE

 

 

 

 

 

 

 

 

 

Front panel – Green

No

Yes

No

No

No

Yes

 

 

 

 

 

 

 

Front panel – Pink

No

No

No

No

Yes

No

 

 

 

 

 

 

 

Back panel – Blue

Yes

No

Yes

No

No

No

 

 

 

 

 

 

 

Back panel – Green

No

Yes

No

No

No

Yes

 

 

 

 

 

 

 

Back panel – Pink

No

No

No

Yes

Yes

No

 

 

 

 

 

 

 

Figure 2 shows the default assignment of the back panel audio connectors.

Item Description

ALine In

BLine Out

CMic In

Figure 2. Back Panel Audio Connectors

NOTE

The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output.

15

Intel Desktop Board D510MO Product Guide

Legacy Input/Output (I/O) Controller

The legacy I/O controller provides the following:

Two serial ports (via onboard headers)

One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support via an onboard headers

Serial IRQ interface compatible with serialized IRQ support for PCI systems

PS/2-style keyboard and mouse ports

Intelligent power management, including a programmable wake up event interface

PCI power management support

The BIOS Setup program provides configuration options for the legacy I/O controller.

LAN Subsystem

The LAN subsystem consists of the following:

Intel NM10 Express Chipset

Realtek 8111DL Gigabit Ethernet Controller for 10/100/1000 Mbits/s Ethernet LAN connectivity

RJ-45 LAN connector with integrated status LEDs

Additional features of the LAN subsystem include:

CSMA/CD protocol engine

LAN connect interface that supports the ethernet controller

PCI bus power management

Supports ACPI technology

Supports LAN wake capabilities

LAN drivers are available from Intel’s World Wide Web site at http://downloadcenter.intel.com/.

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 3). These LEDs indicate the operating states of the LAN.

Figure 3. LAN Status LEDs

16

Desktop Board Features

Table 4 describes the LED states when the board is powered up and the LAN subsystem is operating.

Table 4. LAN Status LEDs

LED

LED Color

LED State

Indicates

 

 

 

 

Activity (A)

Green

Blinking

LAN activity is occurring.

 

 

 

 

 

N/A

Off

10 Mbits/s data rate is selected.

Speed (B)

 

 

 

Green

On

100 Mbits/s data rate is selected.

 

 

 

 

 

Yellow

On

1000 Mbits/s data rate is selected.

 

 

 

 

USB 2.0 Support

The Desktop Board supports up to seven USB 2.0 ports (four ports routed to the back panel and three ports routed to two front panel USB 2.0 headers). One of the front panel USB headers supports an Intel Z-U130 USB Solid-State Drive (or compatible device). The USB 2.0 ports are compatible with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.

USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. Disabling High-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This may be required to accommodate operating systems that do not support USB 2.0.

NOTE

Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device.

SATA Interface

The Desktop Board supports two SATA channels (3.0 Gb/s) that support one device per channel. The SATA controller supports IDE and ACHI configuration and can operate in both legacy and native modes.

Expandability

The Desktop Board provides the following expansion capability:

One PCI connector. The connector can support either a single PCI add-in card or a singleor dual-slot PCI riser card.

One PCI Express Full-Mini Card slot.

17

+ 49 hidden pages