Integra DV-SP301 User Manual
00_DV-SP301.book Page 1 Friday, April 18, 2003 4:18 PM
DVD Player
DV-SP301
Instruction Manual
Contents
Before Using Your DVD Player 2
Getting Started 6
Facilities and Connections 10
Thank you for purchasing the Onkyo DVD Player.
Please read this manual thoroughly before making connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new DVD Player.
Please retain this manual for future reference.
Basic Operations 17
Advanced Operations 22
Function Setup 30
Others 37
E
n
00_DV-SP301.book Page 2 Friday, April 18, 2003 4:18 PM
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Important Safeguards
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions
should be followed.
5. Cleaning – Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as
recommended by the manufacturer.
6. Attachments – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
7. Water and Moisture – Do not use the appliance near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and
the like.
8. Accessories – Do not place the appliance on an unstable
cart, stand, tripod, bracket, or table. The appliance may fall,
causing serious injury to a child or adult, and serious damage
to the appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
appliance. Any mounting of the appliance should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
9. An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
10.Ventilation – Slots and openings in
the cabinet are provided for ventilation
and to ensure reliable operation of the
appliance and to protect it from
overheating, and these openings must not be blocked or
covered. The openings should never be blocked by placing the
appliance on a bed, sofa, rug, or other similar surface. The
appliance should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided. There
should be free space of at least 5 cm (2 in.) and an opening
behind the appliance.
11. Power Sources – The appliance should be operated only
from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company.
12.Grounding or Polarization – The appliance may be
equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13.Power-Cord Protection
– Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
2
PORTABLE CART WARNING
S3125A
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
14. Lightning
– For added protection for the appliance during a
AVIS
RISQUE DE CHOC ELECTRIQUE
OUVRIR
NE PAS
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the appliance due to lightning and power-line
surges.
15. Overloading – Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk
of fire or electric shock.
16. Object and Liquid Entry
– Never push objects of any kind
into the appliance through openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
appliance.
17. Servicing
– Do not attempt to service the appliance yourself
as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
18. Damage Requiring Service – Unplug the appliance form
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
19. Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
20. Safety Check
– Upon completion of any service or repairs to
the appliance, ask the service technician to perform safety
checks to determine that the appliance is in proper operation
condition.
21. Wall or Ceiling Mounting
– The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
22. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
23. Liquid Hazards – The appliance should not be exposed to
dripping or splashing and no objects filled with liquids, such as
vases should be placed on the appliance.
00_DV-SP301.book Page 3 Friday, April 18, 2003 4:18 PM
Precautions
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT”. So, to use this model
properly, read this Instruction Manual carefully. In case of any
trouble, please contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
DANGER:
VISIBLE LASER AND INVISIBLE RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. DO
NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
For U.S. model
The laser is covered by a housing which prevents exposure during
operation or maintenance. However, this product is classified as a
Laser Product by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and Drug
Administration. According to their regulations 21 CFR section
1002.30, all manufactures who sell Laser Products must maintain
records of written communications between the manufacturer,
dealers and customers concerning radiation safety. If you have any
complaints about instructions or explanations affecting the use of
this product, please feel free to write to the address on the back
page of this manual. When you write us, please include the model
number and serial number of your unit.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indicated on the
rear panel.
The label below is applied on the rear panel except for USA and
Canadian models.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For Canadian model
This class B digital apparatus complies with Canadian ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle pour les Canadien
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Sur les modèles dont la fiche est polarisee:
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’AU FOND.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
3
00_DV-SP301.book Page 4 Friday, April 18, 2003 4:18 PM
Precautions
1. Regional Restriction Codes (Region Number)
Regional restriction codes are built into DVD Players and
DVD-Video media for each sales region. If the regional code of
the DVD Player does not match one of the regional codes on
the DVD-Video, playback is not possible.
The regional number can be found on the rear panel of the
DVD Player. (e.g. for Region 1)
2. About This Manual
This manual explains the basic procedures for operating the
DVD Player. Some DVD-Video discs do not support the full
potential of the DVD technology. Your DVD Player may
therefore not respond to all operating commands. Refer to
instruction notes on discs.
A “ ” mark may appear on the TV screen during operation. It
means that the operation is not permitted by the DVD Player or
the disc.
3. Recording Copyright
Recording of copyrighted material for other than personal use
is illegal without permission of the copyright holder.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the
area where the unit will be used meets the required voltage
(e.g., AC 120 V, 60 Hz) written on the rear panel.
5. Do not touch the unit with wet hands
Do not handle the unit or power cord when your hands are wet
or damp. If water or any other liquid enters the case, take the
unit to an authorized service center for inspection.
6. Location of the unit
• Place the unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides
of the unit especially when it is placed in an audio rack. If
ventilation is blocked, the unit may overheat
and malfunction.
• Do not expose the unit to direct sunlight or heating units as
the unit’s internal temperature may rise and shorten the life
of the pickup.
• Avoid damp and dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the
unit on or above one of the speakers.
• Be sure the unit is placed in a horizontal position. Never
place it on its side or on a slanted surface as it
may malfunction.
• When you place the unit near a TV, radio, or VCR, the
playback picture may become poor and the sound may be
distorted. In this case, place the unit away from the TV,
radio, or VCR.
7. Care
From time to time you should wipe the front and rear panels
and the cabinet with a soft cloth. For heavier dirt, dampen a
soft cloth in a weak solution of mild detergent and water, wring
it out dry, and wipe off the dirt. Following this, dry
immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical
solvents or cloths since these could damage the finish or
remove the panel lettering.
1
8. Notes on Handling
When shipping the unit, use the original shipping carton and
packing materials. For maximum protection, repack the unit as
it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the
unit. Do not leave rubber or plastic products in contact with
the unit for a long time. They will leave marks on the finish.
• The top and rear panels of the unit may become warm after a
long period of use. This is not a malfunction.
• When the unit is not in use, be sure to remove the disc and
turn off the power.
• If you do not use the unit for a long period, the unit may not
function properly in the future. Turn on and use the unit
occasionally.
9. To Obtain a Clear Picture
The unit is a high technology, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn down, the
picture quality becomes poor. To obtain a clear picture, we
recommend regular inspection and maintenance (cleaning or
parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
10.Notes on Moisture Condensation
Moisture condensation damages the unit.
Please read the following carefully.
• What is moisture condensation?
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside the unit, one of the
most crucial internal parts of the unit.
• Moisture condensation occurs in the following
cases.
– When you bring the unit directly from a cold place to a
warm place.
– When you use the unit in a room where you just turned on
the heater, or a place where the cold wind from the air
conditioner directly hits the unit.
– In summer, when you use the unit in a hot and humid
place just after you move the unit from an air conditioned
room.
– When you use the unit in a humid place.
• Do not use the unit when moisture
condensation may occur.
If you use the unit in such a situation, it may damage discs
and internal parts. Remove the disc, connect the power cord
of the unit to the wall outlet, turn on the unit, and leave it for
two or three hours. After a few hours, the unit will have
warmed up and evaporated any moisture. Keep the unit
connected to the wall outlet and moisture condensation will
seldom occur.
4
00_DV-SP301.book Page 5 Friday, April 18, 2003 4:18 PM
Table of Contents
Important Safeguards / Precautions / Table of Contents .....................................................2
Getting Started
Notes on Discs .........................................................................................................................6
Playable Discs / The Structure of the Disc Content / About Video CDs /
CD-R/RW Compatibility Information / Handling Discs / Cleaning Discs / Storing Discs /
Notes on Copyright
Features/Supplied Accessories .............................................................................................8
Features / Supplied Accessories
Preparing the Remote Controller ........................................................................................... 9
Inserting the Batteries / Using the Remote Controller
Facilities and Connections
Control Position and Names ................................................................................................. 10
Front Panel / Rear Panel / Display / Remote Controller
Making Connections ..............................................................................................................13
Connecting to a TV / Connecting to an Amplifier
Basic Operations
Turning on ..............................................................................................................................17
Connecting the POWER
Basic Playback .......................................................................................................................18
Starting Playback / Various Playback / Playing back CDs / Playing back MP3s/WMAs /
Playing back JPEGs
Advanced Operations
Other Operations ................................................................................................................... 22
Random Play / Repeat Play / A-B Repeat Play / Memory Edit Play
DVD settings .......................................................................................................................... 24
Selecting a Playback Audio Setting / Changing the Subtitle Language /
Changing the Camera Angle
Using On-Screen Display ......................................................................................................26
Using On-Screen Display / Selecting a Track / Selecting a Time to Playback /
Selecting the Play Mode / Enjoying the Playlist / Selecting the Repeat Mode /
Changing the Time Display
Function Setup
Customizing the Settings ......................................................................................................30
Making Adjustments to Setting / Language Setup / Audio Setup / Display Setup /
Disc Setup / Parental Setup
Others
Troubleshooting ....................................................................................................................37
Specifications ........................................................................................................................39
5
00_DV-SP301.book Page 6 Friday, April 18, 2003 4:18 PM
Notes on Discs
This section shows you how to handle, clean, and store discs.
Playable Discs
This DVD Player can playback the following discs.
Disc mark Contents Disc size
DVD-
Video
Video
CD
CD
CD-R*
CD-RW*
* The DVD Player can play CD-R/RW discs recorded in
CD-DA format, with MP3/WMA audio files, or with
JPEG image files. Some CD-R/RW discs may not be
able to be played back.
• You cannot play discs such as CD-ROM, DVD-Audio,
DVD-RAM, DVD-RW, etc., even if the marks in the above
table are labeled on those discs.
• DVD discs that use other video formats than NTSC or PAL
(e.g., SECAM) cannot be played on this DVD Player.
• Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the internal mechanism
of the DVD Player..
• Do not use discs that have residue from adhesive tape, rental
discs that have peeling labels, or discs that have custom labels
or stickers. Otherwise, you may not be able to eject the discs or
the DVD Player may become inoperative.
Audio + Video
(moving
pictures)
Audio + Video
(moving
pictures)
Audio
Discs with shapes such as
these cannot be played.
12 cm
8 cm
12 cm
8 cm
12 cm
8 cm (CD single)
The Structure of the Disc Content
DVD-Video
Normally, the contents of DVD-Video are divided into titles, and
the titles are subdivided into chapters.
Title 1
Chapter 1
Chapter 2 Chapter 1 Chapter 2 Chapter 3
Title 2
Video CD/CD
Video CD and CD are divided into tracks.
Track 1 Track 2 Track 3 Track 4 Track 5
About Video CDs
This DVD Player supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of Playback
Control.) You can enjoy two playback variations depending on the
type of disc.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movies can be played on this DVD Player in
the same way as a CD.
• Video CD equipped with PBC function (Version 2.0)
In addition to operation of the Video CD not equipped
with the PBC function, you can enjoy playback with
interactive software and search function using the menu
displayed on the TV screen (Menu Playback). Some of
the functions described in this Instruction Manual may
not work with some discs.
About playing copy-controlled CDs
Some audio CDs feature copy protection that doesn’t conform to
the official CD standard. Since these are nonstandard discs, they
may not play properly in the DV-SP301.
6
00_DV-SP301.book Page 7 Friday, April 18, 2003 4:18 PM
CD-R/RW Compatibility Information
• This system is not compatible with multi-session
discs. If you try a multi-session disc, only the first
session will be played.
• Use CD-R or CD-RW media for recording your CD audio files,
MP3/WMA files or JPEG image files.
The discs must be in ISO9660 Level 2 format (folders
•
can be up
• Variable bit-rates (VBR) from 64 kbps to 384 kbps are
supported for MP3, from 16 kbps to 192 kbps are
supported for WMA. (Playing times may display
incorrectly with VBR.)
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported for WMA.
• MP3 files should be MPEG1 Audio Layer 3 format, 32 kHz,
44.1 kHz (recommended) or 48 kHz, 32 kbps - 320 kbps
(128 kbps recommended). Incompatible files will not play.
• This system only plays tracks that are named with the file
extension “.mp3”, “.MP3”, “.wma”, “.WMA”, “.jpeg”,
“.JPEG”, “.jpg” or “.JPG”.
• This system is not compatible with progressive JPEG images.
The maximum resolution is 1600 × 1200 pixels.
• If the file size is large, it may take some time to start playback.
to eight levels deep).
Note
If the disc contains non-MP3/WMA/JPEG format data that has an
extension listed above, the DVD Player will playback the data and
may cause noise or malfunction.
Handling Discs
• Do not touch the playback side of the disc.
Playback side
• Do not attach paper or tape to discs.
Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
Storing Discs
• Do not store discs in a place subject to direct sunlight or near
heat sources.
• Do not store discs in places subject to moisture and dust such
as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects on
discs outside of their case may cause warping.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable,
play in public, and rent copyrighted material without permission.
The video recorded on DVD-Video is copy protected, and any
recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
7
00_DV-SP301.book Page 8 Friday, April 18, 2003 4:18 PM
Features/Supplied Accessories
Features
• Plays DVD-Video Discs, Video CDs, CDs
• 10-bit Video DAC
• Simultaneous output to all video connections
• Digital Outputs pass DTS
Signals
• Built-In Dolby
• Full-function remote controller
• Direct Digital Path
• Pass 96 kHz PCM digital stream
• CD-R and CD-RW playable
•MP3/WMA*
• JPEG CD Playback
• Progressive Scan Video Output
•VLSC*
®
Digital decoder
3
CD Playback
4
(Vector Liner Shaping Circuitry)
®*1
, Dolby®*2 Digital and PCM
Supplied Accessories
Make sure your box contains everything listed below.
If any pieces are missing, contact your nearest Onkyo dealer.
The number of accessories is indicated in brackets [ ].
*1
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
*2
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
*3
*4
An original Onkyo D/A converter which enables Pulse Noise
Reduction.
z cable [1]
Cable used for system connections to an Integra/Onkyo
component with an z jack.
(The components will not function as a system with only
z connections. Be sure to connect the Analog RCA/
phono connection cables correctly as well.)
Windows Media, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Remote controller (RC-458DV) [1]
Batteries (size AAA/R3) [2]
Coaxial cable [1]
In catalogs and on packaging, the letter added to the end of the product name indicates the color of the DV-SP301.
Specifications and operations are the same regardless of color.
Audio/video cable [1]
Conversion plug [1]
This plug is not supplied for certain
regions. Shape may vary depending on the
area in which it was purchased. Use this plug if the
power cord plug of the DV-SP301 does not fit your
AC outlet.
8
00_DV-SP301.book Page 9 Friday, April 18, 2003 4:18 PM
Preparing the Remote Controller
Inserting the Batteries Using the Remote Controller
1 Remove the battery compartment cover by pressing
the tab and lifting up the cover.
Point the remote controller toward the remote control sensor.
Remote control sensor
2 Insert the two batteries (size AAA/R3).
Be sure to match the + and – ends of the batteries with the
diagram inside the battery compartment.
3 Replace the battery compartment cover.
Notes
• Do not mix new batteries with old batteries or different kinds of
batteries.
• To avoid corrosion, remove the batteries if the remote controller
is not to be used for a long time.
• Remove dead batteries immediately to avoid damage from
corrosion. If the remote controller does not operate smoothly,
replace both batteries at the same time.
• The life of the batteries supplied is about six months but this will
vary depending on usage.
3
0
°
3
0
°
1
.
ox
r
p
p
A
)
m
5
(
t
e
e
f
6
Notes
• Place the unit away from strong light such as direct sunlight or
inverted fluorescent light which can prevent proper operation of
the remote controller.
• Using another remote controller of the same type in the same
room or using the unit near equipment which uses infrared rays
may cause operational interference.
• Do not put any object such as a book on the remote controller.
The buttons of the remote controller may be pressed by mistake
and drain the batteries.
• Make sure the audio rack doors do not have colored glass.
Placing the unit behind such doors may prevent proper remote
controller operation.
• If there is any obstacle between the remote controller and the
remote control sensor, the remote controller will not operate.
9
00_DV-SP301.book Page 10 Friday, April 18, 2003 4:18 PM
Control Position and Names
Front Panel
For operational instructions, see the page indicated in brackets [ ].
12 3 4 5 6
809-
1 POWER button [17]
Turns on the main power supply.
2 STANDBY/ON button [17]
Toggle for standby and on.
3 STANDBY indicator [17]
Lights in the standby mode.
4 Disc tray [18]
5 OPEN/CLOSE 0 button [18]
Press to open or close the disc tray.
6 STOP 7 button [18]
Stops playing a disc. When disc is playing, if you press STOP
7 and PLAY £, the disc will start resume play. When STOP
7 is pressed again during stop mode, the resume function is
canceled.
7 PLAY/PAUSE £/8 button [18]
Begins to play disc (close disc tray first if it is open).
Temporarily stops playback when a disc is playing. Press this
button again for normal playback.
8 Remote Control sensor [9]
9 Display [11]
0 SKIP 4/¢ buttons [19, 21]
Allow you to move to the previous chapter or track / the next
chapter or track on a disc.
- SEARCH 1/¡ buttons [19, 21]
Allow you to search through a disc while it is in play mode.
The search speed changes each time you press this button.
Rear Panel
For operational instructions, see the page indicated in brackets [ ].
7
AUDIO OUTPUT
DIGITAL ANALOG
OPTICAL
COAXIAL
L
R
123
1 DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable to connect your DVD Player to an AV component that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theaterquality multichannel sound.
2 DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable to connect your DVD Player to an AV component that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theaterquality multichannel sound.
3 ANALOG OUTPUT jacks [13-16]
Insert audio cables (left and rights) to these jacks on your DVD
Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
4 VIDEO OUTPUT VIDEO jack [13]
Connect a video cable to this jack and to the Video Input jack
on your TV.
5 VIDEO OUTPUT S VIDEO jack [14]
10
If your TV has a S-Video jack, you can connect an S-Video
DVD PLAYER
MODEL NO. DV-SP301
VIDEO OUTPUT
COMPONENT
P
R
VIDEO
S VIDEO
P
B
Y
456
REMOTE
CONTROL
7
cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
6 VIDEO OUTPUT COMPONENT (PR/PB/Y) jacks [15]
If your TV has component inputs, you can connect a component video cable to your TV and to your DVD Player for ideal
video quality. The component video cable only carries the
video signal; remember to connect the left and right audio
cables. If you connect a TV that is compatible with a Progressive scan signal, you can enjoy both Interlaced and Progressive
scan.
Note
Progressive scan only works with NTSC format discs.
7 z jacks [16]
Connect z jacks (Remote Interactive) cable to this jack and
to another Onkyo AV component for synchronized control.
Note
You must make an analog RCA/phono connection, even if you
connect digitally.
00_DV-SP301.book Page 11 Friday, April 18, 2003 4:18 PM
Display
1
PROGRESSIVE
DVD
VCD MP3
42657890-=
3
PBC
CD
~
1 Disc indicators
Indicate the type of disc currently loaded.
2 Play/Pause indicators
Illuminate in play or pause mode.
3 PROGRESSIVE indicator
Illuminates when the DVD player is set to progressive mode.
4 PBC indicator
Illuminates when PBC is on for Video CD.
5 TITLE indicator
Illuminates to indicate the current title number.
6 CHAPTER indicator
Indicates display mode of the current chapter of DVD disc.
7 TRACK indicator
Indicates display mode of the current track number of Video
CD or CD.
■ Display Examples
During DVD-Video playback:
DVD
CHAPTERTITLE MIN SEC
CHAPTERTITLE TRACK HOUR MIN SEC
MEM. INTRO
!
8 Time indicator
Indicate playing time.
9 MEM. indicator
Illuminates during memory playback.
0 INTRO indicator
Illuminates during intro-scan playback.
- REPEAT indicator
Illuminates during repeat playback.
= RESUME indicator
Illuminates when the player is ready for resume playback.
~ Parental Lock indicator
Illuminates in parental lock mode.
! Multifunction indicator
Indicates operating status, messages, etc.
@ RANDOM indicator
Illuminates during random playback.
During MP3/WMA audio playback:
MP3
REPEAT
1ALLA-B
RESUME
RANDOM
@
TRACK MIN SEC
Playing chapter 3 of title 2 Time information of
the current chapter
Notes
• Some discs may not display chapter numbers.
• A time indication not accompanied with a chapter number
shows elapsed time of a segment within the current time.
During Video CD playback:
TRACK MIN SEC
VCD
Playing track 3 Time information of
the current track
Note
Some discs may not display track numbers or elapsed time.
During CD playback:
CD
Playing track 3
TRACK MIN SEC
Time information of
the current track
Playing track 3 Time information of
the current track
Note
Track number is consecutive.
During JPEG image playback:
TRACK MIN SEC
Playing 3rd image Time information of
the current image
Note
The disc indicator does not light up for CDs that contain JPEG
images.
11
00_DV-SP301.book Page 12 Friday, April 18, 2003 4:18 PM
Control Position and Names
Remote Controller
For operational instructions, see the page indicated in brackets [ ].
1@
2
3
4
5
6
7
8
#
$
%
^
&
*
(
)
9
0
=
_
+
~
!
¡
1 STANDBY/ON button [17]
Toggle for standby on and off.
2 DIMMER button [19]
Toggle to control the lightness of the display (3 steps).
3 RANDOM button [22]
Press to do random playback.
4 REPEAT button [22]
Press to repeat playback. You can repeat a title, chapter, track
or entire discs.
5 A-B button [23]
Press to play section A-B repeatedly.
6 STOP 7 button [18]
Stops playing a disc. When a disc is playing, if you press
STOP 7 and PLAY £, the disc will start resume play. When
STOP 7 is pressed again during stop mode, the resume
function is canceled.
7 ON SCREEN button [26-29]
Press this button while you’re playing a disc to see On-screen
display. The On-screen display contains various playback
features and gives you the information about the disc you’re
playing.
8 MENU button [30]
Displays the DVD Disc Menu on the TV screen in play mode
and Setup Menu in stop mode.
9 Cursor buttons (5/a/2/3) [20-30]
Use the cursor buttons to select the items or settings.
0 ENTER button [20-30]
Press this button to select and execute a highlighted menu item.
- TOP MENU button [20-21]
Press to call up the top menu programmed on the DVD.
Depending on the DVD, the top menu may be identical to
DVD menu or title menu.
When playing a Video CD equipped with PBC function, DVD
Player will automatically enter the PBC on mode. Press once to
turn PBC off and press again to turn on.
= AUDIO button [24]
Press to select various audio languages on a disc. When
playing a Video CD, press to select the audio channel.
~ Number buttons (0~9) [21, 26, 27, 36]
Select numbers by pressing these buttons.
! MEMORY button [23]
Press to see Memory Edit Display on the screen in stop mode.
@ OPEN/CLOSE 0 button [18]
Press to open or close the disc tray.
# SLOW / buttons [19]
Allow you to play movies in slow mode. Each time you press
this button, slow speed will be changed. In the case of Video
CD, reverse SLOW cannot be activated.
$ STEP e/E buttons [19]
Freeze a picture when a disc is playing. Also the picture
advances frame by frame each time to press these buttons. In
case of Video CD, reverse STEP can not be activated.
% DOWN 4 / UP ¢ buttons [19, 21]
Allow you to move to the previous chapter or track / the next
chapter or track on a disc.
^ FR 1 / FF ¡ buttons [19, 21]
Allow you to search in reverse or forward through a disc while
it is in play mode. Each time you press these buttons, search
speed changes.
& PLAY £ button [21, 23]
Begins to play disc (close disc tray first if it is open).
* PAUSE 8 button [19]
Temporarily stops playback when a disc is playing. Press
PLAY £ button for normal playback.
( SUBTITLE ON/OFF button [25]
Turns the subtitles on and off when playing a DVD.
) SUBTITLE button [25]
Press to select various subtitle language on a disc.
_ RETURN button [26, 30]
When you’re using the DVD Player’s menu system, press this
button to return to the preceding menu screen.
+ ANGLE button [21, 25]
Press to select various camera angles on a disc.
¡ CLEAR button [23]
Press to clear entered values and settings.
12
Loading...