
SMARTROLL™ Battery Pack
Part Number 0099118
Instruction Sheet
Battery Pack Description
The battery pack enables wireless communication
between the iOS device and the probe and supplies
power to the probe. The battery pack provides a
barometric pressure measurement that is used to
compensate depth and dissolved oxygen
measurements. The ambient temperature
measurement is also provided by the battery pack.
Kit Contents
l Battery pack
l 4 AA lithium batteries
Install the Batteries
The 4 AA batteries that are shipped with the battery
pack are likely to last for 80 hours of continuous use.
3 Belt clip
4 Battery compartment latch
5 Cable connection
1. Twist the cable connector counterclockwise to
remove the cable from the battery pack.
2. Slide the lever on the battery compartment to release
the cover.
3. Install the 4 AA batteries according to the +/indicators engraved on the outside cover.
4. Close the cover and slide the lever to lock the
compartment.
1 Power indicator
2 On/Off button
Informationsubject to change without notice. In-Situ, In-Situ logo, BaroMerge, BaroTROLL, HERMIT, iSitu, P ocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks orregistered trademarks of In-Situ Inc.©2013. All rights reserved.
04/2013 | Rev. 001 | 0099112

General Specifications
Operating
Temperature
Storage
Temperature
Dimensions
Materials Polycarbonate and ABS
Environmental
Rating
Output BLE Radio
Batteries 4 AA lithium or alkaline
Warranty 1 year
Certifications CE, FCC, WEEE
-5 to 50° C (23 to 122° F); 95%
relative humidity, noncondensing
-40 to 65° C (-40 to 140° F);
95% relative humidity, noncondensing
9.5 cm (3.75 in.) height, 7.6 cm
(3 in.) depth, 5.7 cm (2.25 in.)
width
IP67 when battery cover is
closed
Instruction Sheet
Sensor Specifications
Accuracy: ±2° C maximum
Temperature
Sensor
Barometric
Pressure Sensor
Range: -20 to 70° C (-4 to
158° F)
Resolution: 0.1° C
Units: Celsius, Fahrenheit
Accuracy: ±3 mbar
maximum
Range: 300 to 1100 mbar
Resolution: 0.01 mbar
Units: psi, kPa, bar, mbar,
mmHg,
2