Insignia NS-PS4DRC101 User Manual
Quick Setup Guide | NS-PS4DRC101
PS4™ Dual Controller Charger
Congratulations on your purchase of a
high-quality Insignia product. Your new
charger is designed for reliable and
trouble-free performance.
PACKAGE CONTENTS
• Charging stand
• Detachable base
• Controller dongles (2)
• AC adapter
• Quick Setup Guide
FEATURES
• Charge and play without removing dongles
• LED lights to indicate charge status
• Charges two controllers simultaneously
• Compact design also provides convenient
storage for your controllers
If you are using the PS4 controller for the rst time, you will
need to pair it with the console rst. To do this, refer to the
PS4 instructions on how to pair the controller.
INSTALLING THE CONTROLLER
DONGLE
1 Remove any silicon skin or jacket from your
PS4 controller to access the charging port.
2 Align the controller dongle with the charging
port on your controller, then slide it down
until it is completely inserted.
Note: You can leave the controller dongle in place during
gameplay.
Caution: This product contains small items that could be a
choking hazard if swallowed.
Keep these items away from young children!
Controller
dongle
SETTING UP THE CHARGING
STATION
1 Align the detachable base with the tabs on the
charging stand, then slide it into place.
2 Place the charging station and
stand on a stable surface.
3 Insert the DC power connector
into the DC In jack behind the
charging station.
4 Connect the AC power
adapter to a standard AC
power outlet.
Before using your new product, please read these
instructions to prevent any damage.
RECHARGING YOUR PS4 CONTROLLERS
Remove any jacket or silicon skins from your PS4 controllers to permit charging.
Make sure that the controller is facing forward.
• When there are no controllers on the charging station, the blue indicator
lights are o.
• When one controller is charging, a single indicator light will be blue. When two
controllers are charging, both indicator lights will be blue. The top indicator
light corresponds to the top controller charging position, while the bottom
indicator light corresponds to the bottom controller charging position.
• After a controller has nished charging, its corresponding indicator light
turns o.
TROUBLESHOOTING
Before contacting technical support for help, check the following:
If the charge base doesn’t charge the controllers:
• Make sure that the controller dongle is correctly installed in the PS4 controller.
• Make sure that you have connected the AC power adapter to the
charging station and a working AC power outlet.
• If the controller has been stored and/or unused for a long time, it may
have become over-discharged. The charging station may not be able to
recover the battery.
• Make sure that the surrounding temperature is between 41˚ and 86˚F
(5˚C - 30˚C).
• Make sure that the PS4 controller is correctly installed in the charging
station.
• Make sure that you have removed any jacket or silicon skin from your
controller.
If battery life seems short and charging takes a long time:
• Make sure that the surrounding temperature is between 41˚ and 86˚F
(5˚C - 30˚C).
• It is normal for battery life to decrease over time. If the battery life of your
controller is aecting gameplay, consider purchasing a new PS4 controller.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canada ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
ONEYEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
All cited trademarks and logos are properties of their respective holders and these respective holders have not
sponsored, endorsed or approved this product.
“ ” is a trademark of Sony Computer Entertainment Inc.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 14-0533
Loading...