1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Unplug this apparatus during lightning storms
or when unused for long periods of time.
13 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14 To reduce the risk of fire or electric shock, do not
expose this device to rain, moisture, dripping, or
splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The
plug must remain readily operable.
16 Batteries should not be exposed to excessive
heat such as sunshine, fire, or the like.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
17 Do not look into the projector lens when the
time projector is on.
www.insigniaproducts.com
1
NS-PRCL01 Projection Clock Radio
Projection Clock Radio
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-PRCL01 represents the
state of the art in projection clock radio design and
is designed for reliable and trouble-free
performance.
Features
Package contents
• Projection clock radio
• AC-DC adapter
• Battery (CR2032 x 1)
•User Guide
• Quick Setup Guide
Front
# ItemDescription
1
RADIO ON/OFF button
2
AM/FM button
3
SLEEP button
4
PRESET MEMORY button
5
SNOOZE/DIMMER button
6
TIME SET button
7
ALARM 1 button
8
ALARM 2 button
9
PROJECT button
10
ROTATE button
Press once to turn the radio on. Press again to turn the
radio off.
Press to toggle between the AM band and the FM
radio bands.
Press to set the sleep timer, which automatically turns
off the radio after the time duration selected. Press
repeatedly to select the duration.
Press to set radio station presets.
Press to temporarily turn off the alarm (snooze), when
the alarm is sounding. Press to set the backlight level
to high, middle, or low, when the alarm is off.
Press and hold briefly to set the time.
Press to set Alarm 1.
Press to set Alarm 2.
Press once to turn the projector on. Press again to turn
the projector off.
Press to rotate the projected image.
# ItemDescription
11
Projector lens
12
LCD DISPLAY
Projector
13
focus-adjustment ring
14
Projector unit
Projects the time on a wall or ceiling.
Displays the current time, alarm, and radio
informatio n.
Rotate to adjust the focus.
Projects the time.Turn to aim the projected image on
the wall or ceiling.
To p
# ItemDescription
In radio mode, press to tune the radio to a higher
TUNING+/TIME+
1
button
2
TUNING–/TIME– button
3
PRESET+ button
4
PRESET– button
5
VOLUME+ button
6
VOLUME- button
7
Backup battery slot
8
DCIN 6V jack
9
ANT
10
SPEAKER
station.
In time and alarm set mode, press to adjust the hour
and minutes.
In radio mode, press to tune the radio to a lower
station.
In time and alarm set mode, press to adjust the hour
and minutes.
In radio mode, press to select the next preset station.
In memory mode, press to select the preset number
for the station.
In radio mode, press to select the previous preset
station. In memory mode, press to select the preset
number for the station.
Press to increase the radio volume.
Press to decrease the radio volume.
Insert a backup battery into this opening.
Plug the AC adapter into this jack.
Improves FM radio reception.
Plays sound from the radio and alarm.
2
www.insigniaproducts.com
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.