Game modeVideo games generally require
adjustments to the TV picture settings to get the
Congratulations on your purchase of a high-quality,
Insignia TV. Your TV represents the state-of-the-art in
LED TV technology and is designed for reliable and
trouble-free performance.
maximum experience. By simply pressing the
GAME button on your remote control, your TV
settings automatically adjust for video games. It
couldn't be easier.
INlink
Enjoy the benefit of having HDMI CEC-compatible
products plug and play! No setup is needed! CEC
technology lets different devices discover and
communicate with each other. (See page 21 for
instructions on how to use INlink.)
Audio accessibility
Your TV provides audio descriptions of menus and some
remote control functions. Depending on the broadcaster,
audio narration of key elements in programs may also be
available. (See page 30 for instructions on how to turn on
audio narration.)
TV components
This section covers basic information for:
• TV front
• Jacks
• Remote control
TV front
You can find these items on the front of your TV.
ITEMDESCRIPTION
Remote control sensorReceives signals from the remote control. Do not block.
Power indicatorTurns off when your TV is on. Lights red when your TV is off (standby mode).
4
www.insigniaproducts.com
Insignia LED TV
Jacks
Your TV may have any of the following items:
ITEMDESCRIPTIONFUNCTION
Power/Input button
Digital OPTICAL output
jack
Digital COAXIAL output
jack
Power—Press to turn on your TV when your TV is off (in standby
mode). Press and hold to turn off your TV when your TV is on.
Warning: When your TV is off, power still flows through it. To
completely disconnect power, unplug the power cord.
Input—When your TV is turned on, short press to open the
FUNCTION list. Short press this button to move between functions
and highlight the function you want, then press and hold this button
to select the function. Your can select:
• Exit to close the FUNCTION list.
• Input Source to open the INPUT SOURCE list and select a video
input source.
• Channel List to open the channel list and select a channel.
• VOL+ to increase the volume.
• VOL– to decrease the volume.
Connect a sound bar, digital speaker system, or home theater system
to this jack to listen to TV audio through external speakers. See
Digital audio on page 13.
Headphone jack
OR
AUDIO OUT jack
Antenna/Cable in jack
Analog video and audio
(AV) jacks
USB
HDMI
HDMI/ARC
On some TVs the headphone jack and audio out jack are combined
into one jack.
Connect headphones, a sound bar, analog speaker system, or a
home theater system to this jack to listen to TV audio through
external speakers. See Analog audio on page 14.
Connect an antenna or cable TV to this jack. See Coaxial (good) on
page 9 or Connecting an antenna or cable TV (no box) on page 9.
Connect the video and audio for an AV device to these jacks. See AV
(good) on page 8, 10, or 11.
Connect a USB flash drive to this jack to view compatible JPEG
picture files. See Connecting a USB flash drive on page 12 and Using
a USB flash drive on page 22.
Connect an HDMI device to this jack. See HDMI (best) on page 8, 10,
or 11, or Connecting a computer on page 12.
Connect an ARC-enabled home theater receiver to this jack.
OR
Connect an HDMI device to this jack. See HDMI (best) on page 8, 10,
or 11, or Connecting a computer on page 12.
www.insigniaproducts.com
5
Insignia LED TV
ITEMDESCRIPTIONFUNCTION
RESET
Press to reset your TV to the factory defaults. If this button is in a
recessed hole, use a thin item, like a paper clip, to press the button.
SERVICEDo not connect a device to this jack. Do not insert anything into this
jack.
CAUTIONS:
• Check the jacks for position and type before making any connections.
• Loose connections can cause poor audio or video quality. Make sure that all connections are tight and secure.
• The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation
that came with your equipment.
• Always unplug the power cord when connecting external equipment.
6
www.insigniaproducts.com
Insignia LED TV
Remote control
#BUTTONPRESS TO...
Turn your TV on or off (standby mode).
1
(power)
2
Numbers
3
MENUOpen the on-screen menu.
4
5
ENTER
6
EXITClose the on-screen TV menu.
7
ACC
Warning: When your TV is off, power
still flows through it. To disconnect
power, unplug the power cord.
Enter channel numbers and the
parental control password.
Enter a digital sub-channel number. See
Selecting a channel on page 20.
Confirm selections or changes in TV
menus.
Open the Accessibility menu. See
Adjusting accessibility settings on
page 30.
#BUTTONPRESS TO...
TV: Adjusts the volume.
8
VOL+/VOL–
TV menu: Navigate left or right.
USB: Control a photo slideshow.
TV: Change how the pictures appears
9
ASPECT
on the screen.
USB: Zoom when displaying a photo.
Set the sleep timer. You can select Off,
10
SLEEP
5, 10, 15, 30, 60, 90, 120, 180, or 240
minutes.
11
Media
controls
Control INlink-compatible (HDMI CEC)
devices. See Using INlink on page 21.
Open the INPUT SOURCE list and select a
12
INPUT
video input source. See Selecting the
video input source on page 19.
(return)Return to the previous channel.
13
Set up the Favorite channel list or open
the existing Favorite channel list. See
14
FAVORITE
the Favorite Channel Setup and
Favorite Channel List options in
Changing channel settings on page 27.
TV menus—Navigate on-screen TV
15
menus and adjust settings.
USB—Control a photo slideshow.
Display TV status information, such as
16
INFO*
the channel number, channel name (if
available), or signal source. See Viewing
channel information on page 20.
Turn closed captioning on or off. You
can select CC Off, CC On, or CC On
17
CC
when mute. See the Caption Control
option in Using closed captioning on
page 29.
MUTEMute or un-mute the sound.
18
TV: Change to the next higher or lower
19
CH/CH
channel in the channel list.
TV menu: Navigate up or down.
20
GAME
Change the picture mode to Game
mode.
Select the picture mode. You can select
Vivid, Standard, Energy Savings,
21
PICTURE
Movie, Game, or Custom. See the
Picture Mode option in Adjusting the
TV picture on page 23.
Select the audio mode. You can select
22
AUDIO
Standard, Theater, Music, News, or
Custom. See the Audio Mode option in
Adjusting sound settings on page 25.
www.insigniaproducts.com
7
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. See Jacks on page 5.
You can connect a cable or satellite box using:
• HDMI (best)
• AV (good)
• Coaxial (good)
HDMI (best)
Insignia LED TV
HMDI jackCable wall jack
HDMI Cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the cable or
satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the cable or satellite box to, then press
ENTER.
Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.
Cable or satellite box
Coaxial
cable
AV (good)
Note: Cables are often color-coded to match color-coded jacks.
Video and audio jacks
Cable or satellite boxCable wall jack
Coaxial
AV cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the cable or satellite box.
IMPORTANT: When you connect the audio using the AV jacks, the audio output is analog.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.
8
www.insigniaproducts.com
cable
Insignia LED TV
Coaxial (good)
Cable or satellite box
Coaxial
Coaxial cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the coaxial cable to the cable wall jack and to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the antenna/cable jack on your TV and to the coaxial out jack on the cable or
satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list, select TV, then press ENTER.
6 If you cannot tune to channels you know exist, scan for channels. See the Auto Channel Search option in Changing
channel settings on page 27.
cable
Cable wall jackAntenna/cable jack
Connecting an antenna or cable TV (no box)
Antenna/cable
jack
Antenna or cable TV (no box)
Coaxial cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the antenna/cablejack on your TV and to the antenna or cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Press INPUT to open the INPUT SOURCE list, select TV, then press ENTER.
5 If you cannot tune to channels you know exist, scan for channels. See the Auto Channel Search option in Changing
channel settings on page 27.
Notes:
• Use a coaxial cable to eliminate interference and noise from radio waves.
• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.
• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top
antenna with a built-in amplifier.
• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the
broadcaster or cable TV provider.
• If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve
signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.
• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD,
thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.
www.insigniaproducts.com
9
Insignia LED TV
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection
type available. See Jacks on page 5.
You can connect a DVD or Blu-ray player using:
• HDMI (best)
• AV (good)
HDMI (best)
DVD or Blu-ray
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the DVD or Blu-ray
player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the player to, then press ENTER.
player
Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.
AV (good)
Note: Cables are often color-coded to match color-coded jacks.
Video and audio jacks
AV cable
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the DVD or Blu-ray player.
IMPORTANT: When you connect the audio using the AV jacks, the audio output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 If needed, set the player to the correct output mode. See the documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.
DVD or Blu-ray
player
10
www.insigniaproducts.com
Insignia LED TV
Connecting a game console
You can connect a game console using:
• HDMI (best)
• AV (good)
HDMI (best)
Game consoleHDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the game console.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. See the documentation that came with the console.
5 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the console to, then press ENTER.
Note: An HDMI cable carries both audio and video. You do not need to use any audio cables.
AV (good)
Note: Cables are often color-coded to match color-coded jacks.
Video and audio jacks
Console-specific AV cable
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect the console-specific AV cable to the AV jacks on your TV and to the AV jack(s) on the game console.
IMPORTANT:
• Some older game consoles come with a special AV cable. See the documentation that came with your game console or check the
manufacturer’s website.
• When you connect the audio using the AV jacks, the audio output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. See the documentation that came with the console.
5 Press INPUT to open the INPUT SOURCE list, select AV, then press ENTER.
Game console
www.insigniaproducts.com
11
Connecting a computer
Insignia LED TV
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on your TV and to the HDMI out jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list, select the HDMI jack you connected the computer to, then press ENTER.
5 Adjust the display properties on the computer, if necessary.
Computer
Connecting a USB flash drive
USB port
USB flash drive
1 Plug a USB flash drive into the USB port on your TV.
CAUTION: Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash
drive.
2 Select Ye s in the message that appears. The PHOTOS menu opens.
OR
If you switch to a different video input source after you plug in the USB flash drive and want to switch back to the drive, press
INPUT to open the INPUT SOURCE list, select USB(Photos), then press ENTER. The PHOTOS menu opens.
Note: The Photos viewer only supports JPEG format images (with “.jpg” file extensions) and not all JPEG files are compatible with your TV.
See Using a USB flash drive on page 22.
12
www.insigniaproducts.com
Insignia LED TV
Connecting headphones
When you connect headphones, the TV speakers are muted.
WARNING: Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still
lets you hear the sound.
Headphone/Audio out
jack
1 Connect the headphones to the headphone jack on your TV.
2 In the screen that opens, select Headphones/Audio Out Variable, then press ENTER. See Selecting the audio out mode
on page 26.
Notes:
• If you connect headphones when your TV is turned off, then you turn on your TV, the TV speakers are muted and the audio plays
through the headphones.
• You can also connect a home theater system, sound bar, or external speaker system to the headphone jack.
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar using:
• Digital audio
• Analog audio
Digital audio
Depending on the model, your TV may have a digital optical or digital coaxial audio jack.
Digital optical
audio jack
Digital coaxial
audio jack
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital coaxial or digital optical audio cable (not provided) to the digital output jack on your TV and to the audio
in jack on the digital speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. See the documentation that came with
the digital speaker system or sound bar.
5 On your TV’s Audio menu, select Digital Audio Format / Audio Delay, then set the Audio Format option to PCM. See the
Digital Audio Format / Audio Delay option in Adjusting sound settings on page 25.
Digital optical audio cable
OR
Digital coaxial audio cable
Digital speaker system
Sound bar
www.insigniaproducts.com
13
Loading...
+ 29 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.