Ingersoll-Rand 314M, 314A, 313A User Manual

313A, 314A, and 314M Air Sander and Polisher - Exploded Diagram

12B

12A

11C

11D

11A

11B

12G

12F

12E

12D

10B

10A

10C

16B

16A

(Dwg. TPB962)

16573974

Edition 3

March 2009

313A, 314A, and 314M Air Sander and Polisher - Parts List

Item Part Description Part Number Item Part Description Part Number

1 Throttle Handle Assembly 313A-A160 9 Angle Housing Assembly

1A Throttle Handle --- for 313A 313A-A550

1B Inlet Bushing 313A-565 for 314A 314A-A550

Gasket Kit 313A-A283 for 314M 314M-A550

1C Throttle Gasket --- 9A Angle Housing ---

1D Cap Screw --- 9B Nameplate/Warning label

1E Lock Washer --- for 313A 313A-301

2 Lever Assembly 313A-A273 for 314A 314A-301

2A Throttle Lever --- for 314M 314M-301

2B Throttle Lever Pin --- 10 Exhaust Assembly 313A-A123

3 Throttle Assembly 313A-A302 10A Exhaust Deector ---

3A Throttle Valve Seal --- 10B Exhaust Gasket ---

3B Throttle Valve --- 10C Deector Retaining Screw --3C Throttle Valve Spring --- 11 Bearing Housing Assembly 313A-A555

3D Speed Regulator --- 11A Bearing Housing ---

3E Regulator Seal --- 11B Bearing Housing Gasket --3F Valve Cap Seal --- 11C Cap Screw ---

3G Throttle Valve Cap --- 11D Lock Washer ---

4 Rear End Plate Assembly 313A-A12 12 Arbor Assembly

4A Rear End Plate --- for 313A and 314A 313A-A591

4B Rotor Bearing --- for 314M 314M-A591 4C Bearing Rubber Cap --- 12A Arbor ---

4D Rotor Bearing Retainer --- 12B Arbor Lower Bearing ---

5 Rotor Assembly 12C Bearing Retaining Ring ---

for 313A 313A-A53 12D Bearing Cover --for 314A and 314M 314A-A53 12E Rotor Bearing ---

5A Rotor --- 12F Gear Retaining Ring ---

5B Vane (4) 313A-42-4 12G Gear Thrust Washer ---

6 Cylinder Assembly 313A-A3 13 Pad

6A Cylinder --- for 313A and 314A 313A-825-7

6B Cylinder Alignment Pin --- for 314M 314M -825-7

7 Front End Plate Assembly 313A-A11 14 Pad Nut

7A Front End Plate --- for 313A and 314A 313A-226

7B Rotor Bearing --- for 314M 314M-226 7C Pinion Bearing --- 15 Dead Handle 313A-48

8 Gear Assembly 16 Wrench Kit 313A-69

for 313A 313A-A552 16A Arbor Wrench ---

for 314A and 314M 314A-A552 16B Disc Wrench ---

8A Pinion Gear --- †18 Socket Retainer (2135TiMAX and 2135QTiMAX) 2135-425

8B Pinion --- Socket Retainer (2135PTiMAX and 2135QPTiMAX) 804-716 8C Arbor Key ---

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll Rand Oce or Distributor.