Ingersoll Rand 311G User Manual

311G Dual Action Sander Exploded Diagram

311G Dual Action Sander Parts List

Item Part Description Part Number Item Part Description Part Number

1 Motor Cover Assembly 311G-A109 28 Lever Bracket 311A-274

2 Label 311G-300 29 Screw 311A-638

3 Sleeve 311A-350 30 Second Lever 311A-275

4 Rivet 311A-156 31 Hand Grip 311A-160

5 Screw 311A-78 32 Air Inlet 311A-565

6 Muer Element 311A-312 33 Valve Stem 311A-161

7 Muer 311A-311 35 Spring 311A-51

8 Rotor Fixing Plate 311A-118 36 O-Ring 311A-210

9 Washer 311A-207 37 Screw 311A-266

10 Screw 311A-103 38 Screw 311A-16

11 Rear End Plate 311A-12 39 Balance Body 311A-236

12 Rotor Bearing 311A-24 40 Set Screw 311A-454

13 Cylinder 311A-3 41 Warning Label WARNING-25-99

14 Pin 311A-114 42 Screw 311A-101

15 Shim 311A-25 43 Wave Washer 311A-797

16 Vane Packet (set of 5 vanes)311A-42-5 44 Bearing 311A-97

17 Rotor 311A-53 45 Mounting Shaft 311A-235

18 Screw 311A-55 46 Wave Washer 311A-310

19 Spindle 311A-54 47 Retaining Ring 311A-111

20 Front End Plate 311A-11 48 Sanding Pad 311A-825-6

21 Handle 311A-159 49 Washer 311A-839

22 Retaining Ring 311A-797 50 Dr ive Plate 311A-800

23 Regulator 311A-165 51 Balance Nut 311A-836

24 O-Ring 311A-65 52 Washer 311A-18

25 Lever. 311A-273 53 Screw 311A-840

26 Lever Screw 311A-170 54 Plug 311A-954

27 Nut 311A-117 55 Label 311A-LABEL-BALANCE

Not Illustrated.

80178940

Edition 2

June 2014

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll-Rand Oce or Distributor.