Waterproof Floatable Wireless Speaker
Model: iBT500
QUICK START GUIDE
In the Box » iBT500 speaker » charging cable » carry strap » carabiner
Power Color Volume
ON/OFF Mode Up
Play/Pause/ Volume
Pairing/ Down
Speakerphone
CHARGE UNIT
BEFORE USE
ABOUT 3 HOURS
LED Status Indicator
USB Charging
Cable (included)
Charge via USB AC adapter (not included) or other powered USB port
Quick Flashing red = low battery Flashing red = charging
Solid red = fully charged Flashing blue = pairing
BLUETOOTH: PAIRING & PLAYING
Pairing the First Time
2s
iHome iBT500
Manual Pairing
2s 2s
iHome iBT500
»Make your Bluetooth device “discoverable”
»Press and hold Power Button for 2 seconds to turn speaker ON.
»The first time the unit is powered on it will enter auto-pairing mode.
»Select “iHome iBT500” on your device’s Bluetooth menu to complete pairing.
»To manually pair, power ON then press and hold
Pairing Button for 2 seconds.
»Press the Play/Pause Button to play/pause music.
COLOR CHANGING MODES
SLOW FAST FREEZE COLOR PULSE TO MUSIC PRESET PULSE OFF
»Press the Color Mode Button to cycle through modes
SPEAKERPHONE
Answer Call End Call
»The speaker must be on and connected with a paired Bluetooth device to receive calls.
»When a call is received, playing music is muted to hear the ring tone. Press the Pairing/ Speakerphone Button to answer call. For call
waiting function, use phone controls on your device.
»Press the Pairing/Speakerphone Button again to end call and resume previous function.
WATERPROOF OPERATION
»For waterproof operation, ensure the waterproof cover on side of unit is pressed completely flush with the unit.
water tight
not water tight