Husqvarna Rider 215TX Operator's Manual

EEEEnnnngggglllliiiisssshh

hh

Rider 215TX

Oper ator ′ s manual

Please r ead the operator’s manual carefully and make sure you

understand the instructions bef

ore using the machine.

2

–

English

CONTENTS

Contents

CONTENTS

Contents ...................................................................... 2

Ser vice journal

Pre-deliv ery service ..................................................... 3

After the first 8 hours ................................................... 3

INTR ODUCTION

Dear Customer , ............................................................ 4

Driving and transport on public roads .......................... 4

Towing .......................................................................... 4

Use .............................................................................. 4

Good service ................................................................ 4

KEY TO SYMBOLS

Symbols ....................................................................... 5

WHA T IS WHAT?

What is what on the r ide-on mower ............................. 7

SAFETY INSTR UCTIONS

Saf ety instructions ........................................................ 8

Driving on slopes ......................................................... 9

Children ....................................................................... 10

Maintenance ................................................................ 10

Transport ...................................................................... 11

PRESENT ATION

Presentation ................................................................. 12

Throttle trigger ............................................................. 12

Choke control ............................................................... 12

Speed limiter ................................................................ 12

Parking brake ............................................................... 12

Cutting unit ................................................................... 12

Lifting lever for the cutting unit ..................................... 12

Cutting height adjustment lever ................................... 13

Seat ............................................................................. 13

Fueling ......................................................................... 13

Release lever ............................................................... 13

Driving

Bef ore starting ............................................................. 14

Start the engine ........................................................... 14

Starting the engine with a weak battery ....................... 15

Driving the Rider .......................................................... 15

Cutting tips .................................................................. 16

Stop the engine ............................................................ 16

Maintenance

Maintenance schedule ................................................. 17

Cleaning ....................................................................... 18

Removing of the machine hoods ................................. 18

Checking and adjusting the steering wires .................. 18

Adjusting the parking brake ......................................... 19

Checking and adjusting of throttle wire ........................

19

Checking and adjusting the choke wire ....................... 19

Replacement of fuel filter ............................................. 19

Checking the fuel pump’s air filter ................................ 19

Replacing the air filter .................................................. 20

Ignition system ............................................................. 20

Check the safety system .............................................. 20

Main fuse ..................................................................... 21

Checking the tyre pressure .......................................... 21

Checking the engine’s cooling air intake ...................... 21

Checking and adjustment of the cutting unit’s ground

pressure ....................................................................... 21

Checking the cutting unit’s parallelism ......................... 22

Adjusting the parallelism of the cutting unit .................. 22

Service position for the cutting unit .............................. 22

Checking the blades ..................................................... 23

Removing the BioClip plug ........................................... 24

Lubrication

Chec king the engine’s oil level. .................................... 25

Changing the oil filter ................................................... 25

Checking the transmission oil level .............................. 26

Lubricating the belt adjuster ......................................... 26

General lubrication ....................................................... 26

T

roubleshooting schedule

Storage

Winter stor age .............................................................. 28

Guard ........................................................................... 28

Service ......................................................................... 28

T

echnical data

EC-declar ation of conformity ........................................ 31

English

– 3

Ser

vice journal

Pre-deliver y service

1

Charge the battery for 4 hours at max. 3 amp.

2 Fit steering wheel, seat and any optional

equipment.

3 Check and adjust tyre pressure. (60 kP a, 0.6 bar ,

9 psi).

4 Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit
should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4
mm / 1/8” higher than front edge.

Adjust the cutting unit’s cutting height setting so
that the connection rod is tensed at the lo

west

cutting height.

5 Check that the right amount of oil is in the engine.

6 Check that there is oil in the transmission’s oil

tank.

7 Connect battery.

8 Fill with fuel and start engine.

9 Check that machine does not move in neutral.
10 Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

The safety switch for the hydrostat pedals.

11 Check the engine speed See the Technical data

section.

12 Tell customer about:

Needs and benefits of following the service
schedule

.

Servicing and the influence of this journal on the
second-hand v

alue of the machine.

Range of applications for BioClip.

Complete proof of sale etc.

Pre-delivery service carried out. No outstanding problems.
Cer

tified:

_______________________________________________
Date, mileage, stamp, signature

After the first 8 hours

1

Change engine oil

4

–

English

INTR ODUCTION

Dear Customer ,

Thank y ou for choosing a Husqvarna Rider . Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a
patented ar

ticulated steering. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped

controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.
This operator’s manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will

significantly e

xtend the life of the machine and even its second-hand value.
When you sell your Rider, make sure you pass on the operator’s manual to the new owner.
The last chapter in the operator’s manual consists of a Service Journal. Mak e sure that all service work and repairs are recorded.

A well-documented service history reduces the costs of seasonal maintenance and influences the second-hand value of the
machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.

Driving and transpor t on public roads

Chec k the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another
v

ehicle always use approved securing devices and make sure that the machine is securely held.

T

owing

When y our machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a
lo

w speed, otherwise there is a risk of damaging the transmission.

The power transmission must be disengaged when towing, see the instructions under the heading Clutch control.

Use

This r ide-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories
recommended b

y the manufacturer that broadens the application area. Please contact your dealer for more information about
which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other
types of use are incorrect. Compliance with and strict adherence to the conditions of operation, service and repair as specified by
the manufacturer also constitute essential elements of the intended use.

This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and
who are acquainted with the rele

vant safety procedures.

Accident prevention regulations, all other gener ally recognised regulations on safety and occupational medicine, and all road tr

affic

regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injur

y.

Good ser vice

Husqv arna products are sold all over the world and ensures that you, the customer , get the best support and service. For e xample,
bef

ore this machine was delivered it was inspected and adjusted by your dealer. See the certificate in the Service Journal in this

manual.
When you need spare parts or advice on service issues, warranty terms, etc., contact:

On the machine's rating plate you will find the following information:

• The machines type designation.

• The manufacturer’s type number.

• The machine’s serial number.
State the type designation and serial number when ordering spare parts.

This Operator’s Manual belongs to machine with
ser

ial number:

Engine Transmission

English

– 5

KEY T

O SYMBOLS

Symbols

These symbols are on the machine and in the instr uctions.

WARNING! Careless or incorrect use can
result in ser

ious or fatal injury to the

operator or others.

Please read the operator’s manual
carefully and mak

e sure you understand

the instructions before using the machine.

Alw ays wear:

• Approved hearing protection

This product is in accordance with
applicable EC directives.

F

ast

Slo w

Stop the engine .

Chok e.

Fuel

Oil le vel

Cutting height

Bac kwards

F

orwards

Ignition

Hydrostatic free wheel

P

arking brake

Noise emission to the en vironment
according to the European Comm

unity’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.

Clutch in

Clutch out

W

arning: rotating parts. Keep hands and

f

eet clear.

Rotar y blades Keep hands and feet
away from under the hood when the
engine is running

Hot surf ace.

Risk that the machine will tip o ver

Ne

ver drive across a slope

Ne

ver use the machine if persons,

especially children, or animals

, are in the

vicinity

Ne

ver carry passengers on the machine or

equipment

Dr

ive very slowly if no cutting unit is fitted

The cutting dec k must be fitted at full
speed.

Br

ake

6

–

English

KEY T

O SYMBOLS

Star ting instructions

Switch off the engine and tak e off the ignition
cab

le before repairs or maintenance

Chec k the engine’s oil level

Chec k transmission oil level

Lift up the cutting unit

Apply the par king brake.

If the engine is cold, use the choke

Release the parking brake before driving

English – 7

WHAT IS WHAT?

What is what on the ride-on mower

12 3 4 5

7

6

8

10

13

14

119

12

1 Speed limiter for driving forward
2 Speed limiter for reversing
3 Lifting lever for the cutting unit
4 Cutting height adjustment lever
5 Ignition lock
6 Choke control
7 Throttle trigger

8 Cover lock
9 Parking brake
10 Lock button for parking brake
11 Seat adjustment.
12 Fuel cap
13 Battery
14 Lever to disengage the drive

8 – English

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

• Check the insurance coverage for your new Rider.

• Contact your insurance company.

• Y ou should hav e fully comprehensive insurance including:
third par

ty, fire, damage, theft and liability

General use

• Read all the instructions in this operator’s manual and on
the machine before you start it. Ensure you understand
them and then observe them.

• Learn how to use the machine and its controls safely and
lear

n to how to stop quickly. Also learn to recognize the

safety decals.

• Only allow the machine to be used by adults who are
f

amiliar with its use.

• Make sure nobody else is in the vicinity of the machine
when y

ou start the engine, engage the drive or drive off.

• Clear the area of objects such as stones, toys, wires, etc.
that ma

y become caught in the blades and be thrown out.

• Stop the engine and prevent the engine from being
star

ted until you have cleaned the outlet channel.

• Look out for the ejector and do not direct it towards
an

yone.

• Stop the engine and prevent it from starting before you
clean the cutting unit.

• Remember that the driver is responsible for dangers or
accidents

.

• Never carry passengers. The machine is only intended to
be used b

y one person.

• Always look downwards and backwards before and while
re

versing. Keep watch for both large and small obstacles.

• Slow before cornering.

• Switch off the blades when you are not mowing.

• T ake care when rounding a fixed object, so that the b lades
do not hit it.

Never run the machine over foreign objects.

• Only use the machine in daylight or in other well-lit
conditions

. Keep the machine at a safe distance from
holes or other irregularities in the ground. P a y attention to
other possible risks.

• Never use the machine if you are tired, if you have
consumed alcohol, or if y

ou are taking other drugs or
medication that can affect your vision, judgement or co­ordination.

• Keep an eye on the traffic when working close to a road or
when crossing it.

• Never leave the machine unsupervised with the engine
running. Alwa ys stop the b lades, apply the parking brak e,
stop the engine and remove the keys before leaving the
machine.

!

WARNING! This machine produces an
electromagnetic field during operation. This
field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this machine.

!

WARNING! This machine can sever hands
and feet as well as throw objects. Failure to
observe the safety instructions can result in
serious injuries.

!

WARNING! The inside of the muffler contain
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a
damaged muffler.

!

WARNING! The engine emits carbon
monoxide, which is a colourless, poisonous
gas. Do not use the machine in enclosed
spaces.

English – 9

SAFETY INSTRUCTIONS

• Never allow children or other persons not trained in the
use of the machine to use or service it. Local laws may
regulate the age of the user.

• Use hearing protection to minimise the risk of hearing
impair

ment.

• Never wear loose-fitting clothing, jewellery or similar that
can get caught in moving parts.

• Never use the machine when barefoot. Always wear
protectiv

e shoes or protective boots, prefer ably with steel

toes.

• Make sure that you have first aid equipment close at hand
when using the machine

.

Driving on slopes

Driving on slopes is one of the operations where the risk of
the driver losing control of the machine or of it overturning is
the greatest; this can result in serious injury or death. All
slopes demand extra care. If you cannot re verse up a slope or
if you feel unsure, do not mow it.

This is what you do

• Remove obstacles such as stones, branches, etc.

• Mow upwards and downwards, not sideways.

• Do not use the machine on ground that slopes more than
10°.

• Take extra care if any attachments are fitted that can
change the stability of the machine

.

• Avoid starting or stopping on a slope. If the tyres start to
slip

, stop the blades and drive slowly down the slope.

• Always drive smoothly and slowly on slopes.

• Do not make any sudden changes in speed or direction.

• Avoid unnecessary turns on slopes, if necessary, turn
slo

wly and gradually downwards if possible. Drive slowly.

Do not turn the wheel sharply.

• Watch out for and avoid driving over furrows, holes and
b

umps. It is easier for the machine to overturn on uneven

ground. Tall grass can hide obstacles.

• Do not mow too close to edges, ditches or banks. The
machine can suddenly o

verturn if one wheel comes over
the edge of a steep slope or a ditch, or if an edge gives
way.

• Do not mow wet grass. It is slippery, and tyres can lose
their g

rip so that the machine skids.

• Do not try to stabilize the machine by putting your foot on
the g

round.

• When cleaning the chassis, the machine may never be
dr

iven near verges or ditches.

• When mowing, keep away from b ushes and other objects.

!

WARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.

IMPORTANT INFORMATION

Do not drive down slopes with the unit raised.

10 – English

SAFETY INSTRUCTIONS

• Follow the manufacturer’s recommendations regarding
wheel weights or counterbalance weights to increase
machine stability.

Children

• Serious accidents may occur if you fail to be on your guard
for children in the vicinity of the machine. Children are
often attracted to the machine and mowing. Never
assume that children will remain where you last saw them.

• Keep children away from the area to be mo wed and under
close super

vision by another adult.

• Keep an eye out and shut off the machine if children enter
the w

ork area.

• Before and during reversing procedures, look behind you
and do

wn for small children.

• Never allow children to ride along. They can fall off and
ser

iously injure themselves or be in the way for safe

manoeuvring of the machine.

• Never allow children to operate the machine.

• Be particularly careful near corners, bushes, trees or
other objects that b

lock your view.

Maintenance

• Stop the engine. Prev ent starting by removing the ignition
cable from the spark plug or remove the ignition key
before making any adjustments or carrying out
maintenance.

• Never fill the fuel tank indoors.

• Petrol and petrol fumes are poisonous and extremely
flammab

le. Be especially careful when handling petrol, as

carelessness can result in personal injury or fire.

• Only store fuel in containers approved for the purpose.

• Never remove the fuel cap and fill the fuel tank when the
engine is r

unning.

• Allow the engine to cool before refuelling. Do not smoke.
Do not fill with fuel in the vicinity of spar

ks or naked

flames.

• Handle oil, oil filters, fuel and the battery carefully, of
en

vironmental considerations. Follow the local recycling

requirements.

• Electrical shocks can cause injuries. Do not touch cables
when the engine is r

unning. Do not test the ignition

system with your fingers.

• If leaks arise in the fuel system, the engine must not be
star

ted until the problem has been resolved.

• Store the machine and fuel in such a way that there is no
r

isk that leaking fuel or fumes can cause any damage.

• Check the fuel level before each use and leave space for
the fuel to e

xpand, because the heat from the engine and
the sun may otherwise cause the fuel to expand and
overflow.

• Avoid overfilling. If y ou spill petrol on the machine, wipe up
the spill and w

ait until it has evaporated bef ore starting the

engine. If you spill on your clothing, change your clothing.

• Allow the machine to cool before performing any actions
in the engine compar

tment.

• Take care with battery maintenance. Explosive gases
f

orm in the battery. Never perform maintenance on the
battery while smoking or in the vicinity of open flames or
sparks. This can cause the battery to explode and cause
serious injuries.

• Make sure all nuts and bolts are tightened correctly and
that the equipment is in good condition.

• Do not modify safety equipment. Check regularly to be
sure it w

orks properly. The machine must not be driven if
protective plates, protective covers, safety switches or
other protective devices are not fitted or are defective.

• Observe the risk of injury caused by moving or hot parts if
the engine is star

ted with the engine cover open or

protective cowlings removed.

IMPORTANT INFORMATION

Wheel weights fitted on the rear wheels are recommended
when driving on slopes for safer steering and improved
manoeuvrability . Consult your dealer concerning the use of
wheel weights if you are unsure. Wheel weights can not be
used on AWD-machines. Use counterweights.

!

WARNING! The engine and the exhaust
system become very hot during operation.
Risk of burn injuries if touched. When
mowing, keep away from bushes and other
materials in order to avoid a heating effect.