Husqvarna Rider 13 C, Rider 16 AWD, Rider 11 C, Rider 11 R, Rider 16 C Operator's Manual
EEEEnnnngggglllliiiisssshh
hh
Rider 11 R Rider 11 C Rider 13 C
Rider 16 C AWD Rider 16 C
Oper ator ′ s manual
Please r ead the operator’s manual carefully and make sure you
understand the instructions before using the machine.
2
–
English
CONTENTS
Contents
CONTENTS
Contents ...................................................................... 2
INTR ODUCTION
Dear Customer , ............................................................ 3
Driving and transport on public roads .......................... 3
Towing .......................................................................... 3
Use .............................................................................. 3
Good service ................................................................ 4
Serial Number .............................................................. 4
Ser vice journal
Pre-deliv ery service ..................................................... 5
After the first 8 hours ................................................... 5
KEY TO SYMBOLS
Symbols ....................................................................... 6
SAFETY INSTR UCTIONS
Saf ety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
WHA T IS WHAT?
Location of the controls ................................................ 12
PRESENT ATION
Presentation ................................................................. 13
Cutting unit ................................................................... 14
Lifting lever for the cutting unit ..................................... 14
Cutting height adjustment lever ................................... 14
Seat ............................................................................. 14
Fuelling ........................................................................ 14
Release lever ............................................................... 15
Release lever ............................................................... 15
Driving
Bef ore starting ............................................................. 16
Start the engine ........................................................... 16
Starting the engine with a weak battery ....................... 17
Driving the Rider .......................................................... 18
Cutting tips .................................................................. 19
Starting on a slope, manual gearbox. (Rider 11 R and
Rider 11 C). ..................................................................
19
Stop the engine ............................................................ 19
Maintenance
Maintenance schedule ................................................. 20
Cleaning ....................................................................... 21
Removing of the machine hoods ................................. 21
Checking and adjusting the steering wires .................. 22
Checking the brake Rider 11 R and Rider 11 C ........... 22
Adjusting the brake ...................................................... 22
Adjusting the parking brake ......................................... 23
Adjusting the parking brake ......................................... 23
Adjusting the throttle wire ............................................ 23
Replacing the air filter .................................................. 24
Replacement of fuel filter ............................................. 25
Checking the fuel pump’s air filter ................................ 25
Checking the tyre pressure .......................................... 25
Controlling the acid level in a dry-charged battery ....... 25
Ignition system ............................................................. 26
Fuses ........................................................................... 26
Check the safety system .............................................. 27
Checking the engine’s cooling air intake ...................... 29
Checking and adjustment of the cutting unit’s ground
pressure .......................................................................
29
Checking the cutting unit’s parallelism ......................... 29
Adjusting the parallelism of the cutting unit .................. 30
Service position for the cutting unit .............................. 30
Checking the blades ..................................................... 32
Removing the BioClip plug ........................................... 32
Lubrication
Chec king the engine’s oil level. .................................... 33
Replacing the engine oil ............................................... 33
Checking the oil level in the transmission on Rider 13 C,
Rider 16 AWD and Rider 16 C ..................................... 34
Lubricating the belt adjuster ......................................... 34
Lubrication Rider 11 R and Rider 11 C ........................ 34
General lubrication ....................................................... 34
T
roubleshooting schedule
Storage
Winter stor age .............................................................. 36
Guard ........................................................................... 36
Service ......................................................................... 36
TECHNICAL D ATA
EC-declar ation of conformity ........................................ 40
English
– 3
INTR ODUCTION
Dear Customer ,
Thank y ou for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a
patented rear-wheel steering system. Riders are designed for maximum efficiency even in small or confined areas. The closely
grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.
We hope you will find this operator’s manual very useful. By following its instructions (on operation, service, maintenance, etc.) you
will significantly extend the life of the machine and even its second-hand value.
When you sell your Rider, make sure you pass on the operator’s manual to the new owner.
The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded.
A well-documented service history reduces the costs of seasonal maintenance and influences the second-hand value of the
machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.
Driving and transpor t on public roads
Chec k the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another
vehicle always use approved securing devices and make sure that the machine is securely held.
T
owing
When y our machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a
low speed, otherwise there is a risk of damaging the transmission.
The power transmission must be disengaged when towing, see the instructions under the heading Clutch control.
Use
This machine is designed to mo w grass on open and level ground surfaces. In addition, there is a number of accessories
recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about
which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other
types of use are incorrect. Use in any other way is considered as contrary to the intended use. Compliance with and strict
adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements
of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and
who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road traffic
regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.
4
–
English
INTR ODUCTION
Good ser vice
Husqv arna products are sold all over the world and only through servicing dealers. This is to ensure that you, the customer, get
the best support and service. For example, before this machine was delivered it was inspected and adjusted by your dealer. See
the certificate in the Service Journal in this manual.
When you need spare parts or advice on service issues, warranty terms, etc., contact:
Serial Number
The ser ial number can be found on the plate attached to the front, left-hand side under the seat. Stated on the plate, from the top
are:
• The machines type designation.
• The manufacturer’s type number.
• The machine’s serial number.
State the type designation and serial number when ordering spare parts.
The engine serial number is given on a bar code decal. This is located on the left side of the crankcase, in front of the starter motor.
The sign states:
• Model
• Type
• Code.
Please quote when ordering parts.
The transmission’s serial number on hydrostatic machines is stated on the barcode decal located on the front of the housing on
the left-hand drive axle:
• Type designation is stated above the barcode and starts with the letter ”K”.
• The serial number is stated above the barcode and has the prefix “s/n”.
• The manufacturer’s type number is stated under the barcode and has the prefix “p/n”.
State the type designation and serial number when ordering spare parts.
This Operator’s Manual belongs to machine with
serial number:
Engine Transmission
English
– 5
Ser vice journal
Pre-deliver y service
1
1a. Dry-charged battery (506788801) Top up battery with acid and charge for four hours.
1b. Wet-charged battery (510138501) Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar, 9 PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4 mm / 1/8” higher than front edge.
Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16” above the frame of the unit at the lowest cutting
height.
5 Check that the right amount of oil is in the engine.
6 Check that the right amount of oil is in the transmission. (Not Rider 11).
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for the hydrostat pedals/neutral position.
Check engine speed. See the Technical data section.
11 Check the synchronisation between the front and rear wheels. (Rider 16 AWD) See the workshop manual.
12 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certified:
Date , mileage, stamp, signature
After the fi rst 8 hours
1
Change engine oil
2 Change the oil in the gearbox. (Only AWD-machines)
6
–
English
KEY T O SYMBOLS
Symbols
These symbols are on the machine and in the instr uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Hydrostatic freewheel
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Risk that the machine will tip over
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
English
– 7
KEY T O SYMBOLS
Star ting instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Apply and lock the parking brake.
If the engine is cold, use the choke
Release the parking brake before driving
Switch off the engine and take off the
ignition cable before repairs or maintenance
8
–
English
SAFETY INSTR UCTIONS
Saf ety instructions
These instr uctions are for your safety. Read them carefully.
Insure y our Rider
•
Check the insurance coverage for your new Rider.
• Contact your insurance company.
• You should have fully comprehensive insurance including:
third party, fire, damage, theft and liability
General use
•
Read all the instructions in this operator’s manual and on
the machine before you start it. Ensure you understand
them and then observe them.
• Learn how to use the machine and its controls safely and
learn to how to stop quickly. Also learn to recognize the
safety decals.
• Only allow the machine to be used by adults who are
familiar with its use.
• Make sure nobody else is in the vicinity of the machine
when you start the engine, engage the drive or drive off.
• Clear the area of objects such as stones, toys, wires, etc.
that may become caught in the blades and be thrown out.
• Stop the engine and prevent the engine from being
started until you have cleaned the outlet channel.
• Look out for the ejector and do not direct it towards
anyone.
• Stop the engine and prevent it from starting before you
clean the cutting unit.
• Remember that the driver is responsible for dangers or
accidents.
• Never carry passengers. The machine is only intended to
be used by one person.
• Always look downwards and backwards before and while
reversing. Keep watch for both large and small obstacles.
• Slow before cornering.
• Switch off the blades when you are not mowing.
• Take care when rounding a fixed object, so that the blades
do not hit it. Never run the machine over foreign objects.
• Only use the machine in daylight or in other well-lit
conditions. Keep the machine at a safe distance from
holes or other irregularities in the ground. Pay attention to
other possible risks.
• Never use the machine if you are tired, if you have
consumed alcohol, or if you are taking other drugs or
medication that can affect your vision, judgement or coordination.
• Keep an eye on the traffic when working close to a road or
when crossing it.
• Never leave the machine unsupervised with the engine
running. Always stop the blades, apply the parking brake,
stop the engine and remove the keys before leaving the
machine.
• Never allow children or other persons not trained in the
use of the machine to use or service it. Local laws may
regulate the age of the user.
!
W
ARNING! The ignition system of this
machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with pacemakers. To
reduce the risk of serious or fatal injury, we
recommend persons with pacemakers to
consult their physician and the pacemaker
manufacturer before operating this machine.
!
W
ARNING! This machine can sever hands
and feet as well as throw objects. Failure to
observe the safety instructions can result in
serious injuries.
!
W
ARNING! Engine exhaust, some of its
constituents and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects or
other reproductive impairment. The engine
emits carbon monoxide, which is a
colourless, poisonous gas. Do not use the
machine in enclosed spaces.
English
– 9
SAFETY INSTR UCTIONS
•
Use hearing protection to minimise the risk of hearing
impairment.
• Never wear loose fitting clothes that can catch in moving
parts.
• Never use the machine when barefoot. Always wear
protective shoes or protective boots, preferably with steel
toes.
• Make sure that you have first aid equipment close at hand
when using the machine.
Driving on slopes
Dr
iving on slopes is one of the operations where the risk of
the driver losing control of the machine or of it overturning is
the greatest; this can result in serious injury or death. All
slopes demand extra care. If you cannot reverse up a slope or
if you feel unsure, do not mow it.
This is what y ou do
•
Remove obstacles such as stones, branches, etc.
• Mow upwards and downwards, not sideways.
• Do not use the machine on ground that slopes more than
10 ° .
• Avoid starting or stopping on a slope. If the tyres start to
slip, stop the blades and drive slowly down the slope.
• Always drive smoothly and slowly on slopes.
• Do not make any sudden changes in speed or direction.
• Avoid unnecessary turns on slopes, if necessary, turn
slowly and gradually downwards if possible. Drive slowly.
Do not turn the wheel sharply. Rider 11: Select a low gear
so that you will not need to stop to change gear. The
machine engine-brakes even better in low gear.
• Watch out for and avoid driving over furrows, holes and
bumps. It is easier for the machine to overturn on uneven
ground. Tall grass can hide obstacles.
• Take extra care if any attachments are fitted that can
change the stability of the machine.
• Do not mow too close to edges, ditches or banks. The
machine can suddenly overturn if one wheel comes over
the edge of a steep slope or a ditch, or if an edge gives
way.
!
W
ARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
IMPOR TANT INFORMATION
Do not dr ive down slopes with the unit raised.
10
–
English
SAFETY INSTR UCTIONS
•
Do not mow wet grass. It is slippery, and tyres can lose
their grip so that the machine skids.
• Do not try to stabilize the machine by putting your foot on
the ground.
• When cleaning the chassis, the machine may never be
driven near verges or ditches.
• When mowing, keep away from bushes and other
materials in order to avoid a heating effect.
• Follow the manufacturer’s recommendations regarding
wheel weights or counterbalance weights to increase
machine stability.
Children
• Serious accidents may occur if you fail to be on your guard
for children in the vicinity of the machine. Children are
often attracted to the machine and mowing. Never
assume that children will remain where you last saw them.
• Keep children away from the area to be mowed and under
close supervision by another adult.
• Keep an eye out and shut off the machine if children enter
the work area.
• Before and during reversing procedures, look behind you
and down for small children.
• Never allow children to ride along. They can fall off and
seriously injure themselves or be in the way for safe
manoeuvring of the machine.
• Never allow children to operate the machine.
• Be particularly careful near corners, bushes, trees or
other objects that block your view.
Maintenance
• Stop the engine. Prevent starting by removing the ignition
cable from the spark plug or remove the ignition key
before making any adjustments or carrying out
maintenance.
• Never fill the fuel tank indoors.
• Petrol and petrol fumes are poisonous and extremely
flammable. Be especially careful when handling petrol, as
carelessness can result in personal injury or fire.
• Only store fuel in containers approved for the purpose.
• Never remove the fuel cap and fill the petrol tank while the
engine is running.
• Allow the engine to cool before refuelling. Do not smoke.
Do not fill petrol in the vicinity of sparks or naked flames.
• Handle oil, oil filters, fuel and the battery carefully, of
environmental considerations. Follow the local recycling
requirements.
• Electrical shocks can cause injuries. Do not touch cables
when the engine is running. Do not test the ignition
system with your fingers.
• If leaks arise in the fuel system, the engine must not be
started until the problem has been resolved.
• Store the machine and fuel in such a way that there is no
risk that leaking fuel or fumes can cause any damage.
• Check the fuel level before each use and leave space for
the fuel to expand, because the heat from the engine and
the sun may otherwise cause the fuel to expand and
overflow.
• Avoid overfilling. If you spill petrol on the machine, wipe up
the spill and wait until it has evaporated before starting the
engine. If you spill on your clothing, change your clothing.
• Allow the machine to cool before performing any actions
in the engine compartment.
IMPORTANT INFORMATION
Wheel weights fitted on the rear wheels are recommended
when driving on slopes for safer steering and improved
manoeuvrability. Consult your dealer concerning the use of
wheel weights if you are unsure. Wheel weights can not be
used on AWD-machines. Use counterweights.
!
WARNING! The engine and the exhaust
system become very hot during operation.
Risk of burn injuries if touched. When
mowing, keep away from bushes and other
materials in order to avoid a heating effect.
!
WARNING! The battery contains lead and
lead pollutants, chemicals that are
considered to cause cancer, birth defects or
other reproductive impairment. Wash your
hands after touching the battery.
English – 11
SAFETY INSTRUCTIONS
• Be especially careful when handling battery acid. Acid on
the skin can cause serious corrosive injuries. In the event
of spillage on the skin wash immediately with water.
• Acid in the eyes can cause blindness, contact a doctor
immediately.
• Take care with battery maintenance. Explosive gases
form in the battery. Never perform maintenance on the
battery while smoking or in the vicinity of open flames or
sparks. This can cause the battery to explode and cause
serious injuries.
• Make sure all nuts and bolts are tightened correctly and
that the equipment is in good condition.
• Do not modify safety equipment. Check regularly to be
sure it works properly. The machine must not be driven if
protective plates, protective covers, safety switches or
other protective devices are not fitted or are defective.
• Observe the risk of injury caused by moving or hot parts if
the engine is started with the engine cover open or
protective cowlings removed.
• Do not change the setting of governors and avoid running
the engine at excessively high revs. If you run too fast, you
risk damaging the machine components.
• Never use the machine indoors or in spaces lacking
proper ventilation. Exhaust fumes contain carbon
monoxide, an odourless, poisonous and highly dangerous
gas.
• Stop and inspect the equipment if you run over or into
anything. If necessary, make repairs before starting.
• Never make adjustments with the engine running.
• The machine is tested and approved only with the
equipment originally provided or recommended by the
manufacturer.
• The blades are sharp and can cause cuts. Wrap the
blades or wear protective gloves when handling them.
• Check regularly that the parking brake works. Adjust and
maintain as required.
• Reduce the risk of fire by removing grass, leaves and
other debris that may have fastened on the machine.
Allow the machine to cool before putting it in storage.
Transport
• The machine is heavy and can cause serious crush
injuries. Take extra care when loading it onto or off a
vehicle or trailer.
• Use an approved trailer to transport the machine. Activate
the parking brake, and secure the machine using
approved fasteners, such as tension belts, chains or ropes
when transporting.
• Check and observe local road traffic regulations before
transporting or driving the machine on roads.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the machine
during transport. Ensure you secure the machine firmly to
the transporting vehicle.
12 – En
g
lish
WHAT IS WHAT?
Location of the controls
1 Throttle control/choke control
2 Ignition lock
3 Gear shift lever, 11 and 11 C
4 Cutting height adjustment lever
5 Lifting lever for the cutting unit
6 Accelerator for reversing, 13 C, 13 AWD and 15 C.
7 Accelerator for driving forwards, 13 C, 13 AWD, 15C.
Parking brake, 11 and 11 C
8 Parking brake, 13 C, 13 AWD and 15 C Clutch pedal, 11
and 11 C
9 Lock button for the parking brake, left side on 13 C, 13
AWD and 15 C, right-hand side on 11 and 11 C.
10 Seat adjustment.
11 Lever to disengage the driving front axle, 13 AWD
12 Fuel cap
13 Cover lock
14 Battery
15 Lever to disengage the drive, 13 C and 15 C Lever to
disengage the driving rear axle, 13 AWD
English – 13
PRESENTATION
Presentation
Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. Five models
equipped with engines from Briggs & Stratton are described
in this operator’s manual.
Rider 11R and Rider 11C have an ”inline” gearbox with 5
forward gears and reverse.
On Rider 13 C, Rider 16 AWD and Rider 16 C transmission is
by means of a variable speed hydrostatic gearbox.
Clutch pedal Rider 11R and Rider 11 C
The clutch pedal disengages the engine and stops
propulsion.
The blade drive is not affected by the clutch pedal.
Brake pedal / Parking brake
Rider 11R and Rider 11 C
The brake pedal activates a disc brake that is located on the
gearbox and stops the drive gear. The clutch pedal should
also be pressed down when braking to achieve the best
braking effect.
Parking brake
The parking brake is applied as follows:
1 Press down the parking brake pedal.
2 Press in the lock button on the steering column.
3 Release the parking brake pedal while keeping the button
pressed in.
Rider 11R and Rider 11 C have the brake pedal and release
button on the right-hand side.
The parking brake lock disengages automatically when the
brake pedal is pressed.
Throttle and choke controls
The throttle control regulates the engine speed, and thereby
also the rotation speed of the blades.
The control is also used to activate the choke. When the
choke is engaged a richer fuel and air mixture is fed to the
engine, which facilitates starting in the cold.
Speed limiter Rider 13C, 16 AWD and 16 C.
The speed of the machine is steplessly regulated with two
pedals. Pedal (1) is used to drive forwards, and pedal (2) to
drive backwards.
!
WARNING! Make sure that branches do not
obstruct the pedals when mowing under
bushes. Otherwise there is a risk you may
lose control.
14 – En
g
lish
PRESENTATION
Cutting unit
Rider 11 R has a cutting unit with rear ejection, i.e. clippings
are thrown behind the cutting unit.
Rider 11 C, 13 C, 16 AWD and 16 C have a 3-blade Combiunit
The Combi-unit, equipped with a BioClip-plug, finely chops
the cuttings to fertiliser. Without the BioClip-plug the unit
works in the same way as a rear ejection unit.
Lifting lever for the cutting unit
The lift lever is used to set the cutting unit in transport or
mowing position.
If the lever is pulled backwards the unit is raised and the
blades automatically stop rotating (transport position).
If the lock button is pressed in and the lever is moved forwards
the unit will be lowered and the blades will automatically start
to rotate (mowing position).
The lever can also be used to temporarily regulate the cutting
height, e.g. for a small mound in the lawn.
Cutting height adjustment lever
The cutting height can be adjusted to 7 different positions with
the cutting height lever.
Combi-unit 30-80 mm 1,18-3,15
Seat
The seat has a jointed attachment on the front edge and can
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the handles under the seat and adjust it forwards or
backwards to the desired position.
Fuelling
The engine runs on unleaded petrol with a minimum octane
rating of 85 (not mixed with oil). We recommend the use of
biodegradable alkylate petrol. Do not use petrol that contains
methanol.
Do not fill the tank completely, leave an expansion area of at
least 2.5 cm (1“).
!
WARNING! Petrol is highly inflammable.
Exercise care and refuel outdoors (see
safety instructions).
IMPORTANT!
Do not use the fuel tank as a support area.
Loading...