Husqvarna Rider 15V2 User Manual
Operator´s manual
Rider 15V2
Please read these instructions carefully and make sure
you understand them before using the machine.
English
CONTENTS
Operator’s Manual for
Rider 15V2
Safety rules for USA ........................................... 2
Introduction ......................................................... 4
Travel and transport on public roads ................ 4
Towing .............................................................. 4
Intended use .................................................... 4
Serial number...................................................5
Explanation of symbols ...................................... 6
Safety instructions .............................................. 7
General Use ..................................................... 7
Driving on Slopes ............................................. 9
Children..........................................................10
Maintenance .................................................. 10
Transport ........................................................12
Presentation ...................................................... 13
Location of the controls .................................. 13
Throttle control ............................................... 14
Choke lever .................................................... 14
Speed limiter .................................................. 14
Parking brake ................................................. 14
Cutting unit ..................................................... 15
Lift lever for cutting unit .................................. 15
Lever for adjustment of cutting height ............ 16
Seat ................................................................16
Fuelling .......................................................... 16
Driving ................................................................ 17
Before starting ................................................17
Starting the engine ......................................... 17
Driving the machine ....................................... 18
Cutting tips ..................................................... 19
Stopping the engine ....................................... 20
Release lever ................................................. 20
Maintenance ...................................................... 21
Maintenance schedule ................................... 21
Removing the machine hoods ....................... 22
Checking and adjusting of the steering wires 23
Adjusting the brake ........................................ 23
Checking and adjusting the throttle wire ........ 24
Checking and adjusting the choke wire.......... 24
Check the silencer.......................................... 24
Replacing the fuel filter .................................. 25
Replacing the air filter .................................... 25
Checking of the fuel pump’s air filter ............. 26
Checking the level of battery acid .................. 26
Ignition system ............................................... 27
Inspecting the safety system.......................... 28
Main fuse ....................................................... 29
Checking the tyre pressure ............................ 29
Checking the engine’s cooling air intake ........29
Fitting the cutting unit ..................................... 30
Removing the cutting unit .............................. 31
Checking and adjusting the cutting unit’s
ground pressure ............................................. 32
Checking the cutting unit´s parallelism........... 32
Adjusting the parallelism of the cutting unit.... 33
Replacing the cutting unit belts ...................... 33
Service position for the cutting unit ................ 34
Checking the blades....................................... 37
Removal of BioClip plug................................. 37
Lubrication ......................................................... 38
Checking the engine’s oil level .......................38
Changing the oil ............................................. 39
Changing the oil filter ..................................... 39
Checking the transmission’s oil level.............. 40
Lubricating the belt adjuster ........................... 40
General lubrication ......................................... 40
Trouble shooting schedule............................... 41
Storage ............................................................... 42
Winter storage ................................................ 42
Cover.............................................................. 42
Service ........................................................... 42
Technical data ................................................... 43
Service journal .................................................. 44
IMPORTANT INFORMATION
Read carefully through the Operator’s manual so that you know how to use and maintain the
Rider before you use it.
For service measures other than those described in this manual, please contact an authorised
dealer that provides parts and service.
English – 1
1. Safety rules for USA
These instructions are for your safety. Read them carefully.
Safe operation practices for ride-on mowers
IMPORTANT!
This cutting machine is capable of amputating hands and feet and throwing objects. Failure to
observe the following safety instructions could result in serious injury or death.
I. General operation
1. Read, understand and follow all instructions in
the manual and on the machine before
starting.
2. Only allow responsible adults, who are familiar
with the instructions, to operate the machine.
3. Clear the area of objects such as rocks, toys,
wire, etc., which could be picked up and
thrown by the blade.
4. Be sure the area is clear of other people
before mowing. Stop the machine if anyone
enters the area.
5. Never carry passengers.
6. Do not mow in reverse unless absolutely
necessary. Always look down and behind
before and while backing.
7. Be aware of the mower discharge direction
and do not point it at anyone. Do not operate
the mower without either the entire grass
catcher or the guard in place.
8. Slow down before turning.
9. Never leave a running machine unattended.
Always turn off blades, set parking brake, stop
engine and remove keys before dismounting.
10. Turn off blades when not mowing.
11. Stop engine before removing grass catcher or
unclogging chute.
12. Mow only in daylight or good artificial light.
13. Do not operate the machine while under the
influence of alcohol or drugs.
14. Watch for traffic when operating near or
crossing roadways.
15. Use extra care when loading or unloading the
machine into a trailer or truck.
II. Slope operation
Slopes are a major factor related to loss-of-control
and tip-over accidents, which can result in severe
injury or death.
you cannot back up the slope or if you feel uneasy
on it, do not mow it.
DO
Mow up and down slopes, not across.
Remove obstacles such as rocks, tree limbs,
etc.
Watch for holes, ruts or bumps. Uneven
terrain could overturn the machine.
can
All
slopes require extra caution. If
hide obstacles.
Tall grass
Use slow speed. Choose a low gear so that
you will not have to stop or shift while on the
slope.
Follow the manufacturer’s recommendations
for wheel weights or counterweights to improve
stability.
Use extra care with grass catchers or other
attachments. These can change the stability of
the machine.
Keep all movement on the slopes
gradual.
speed or direction.
Avoid starting or stopping on a slope. If tires
lose traction, disengage the blades and
proceed slowly
DO NOT
Do not turn on slopes unless necessary and
then, turn slowly and gradually downhill, if
possible.
Do not mow near drop-offs, ditches or
embandments. The mower could suddenly turn
over if a wheel is over the edge of a cliff or
ditch, or if an edge caves in.
Do not mow on wet grass. Reduced traction
could cause sliding.
Do not try to stabilize the machine by putting
your foot on the ground.
Do not use grass catcher on steep slopes.
Do not make sudden changes in
straight
down the slope.
slow
and
III. Children
Tragic accidents can occur if the operator is not
alert to the presence of children. Children are often
attracted to the machine and the mowing activity.
Never
assume that children will remain where you
last saw them.
1. Keep children out of the mowing area and
under the watchful care of another responsible
adult.
2. Be alert and turn machine off if children enter
the area.
3. Before and when backing, look behind and
down
for small children.
4. Never carry children. They may fall off and be
seriously injured or interfere with safe machine
operation.
5. Never allow children to operate the machine.
6. Use extra care when approaching blind
corners, shrubs, trees or other objects that may
obscure vision.
2 – English
1. Safety rules for USA
IV. Service
1. Use extra care in handling gasoline and other
fuels. They are flammable and vapours are
explosive.
a) Use only an approved container.
b) Never remove gas cap or add fuel with the
engine running. Allow engine to cool before
refuelling. Do not smoke.
c) Never refuel the machine indoors.
d) Never store the machine or fuel container
inside where there is an open flame, such as
in a water heater.
2. Never run a machine inside a closed area.
3. Keep nuts and bolts, especially blade
attachment bolts, tight and keep equipment in
good condition.
4. Never tamper with safety devices. Check their
proper operation regularly.
5. Keep machine free of grass, leaves or other
debris build-up. Clean up oil or fuel spillage.
Allow machine to cool before storing.
6. Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
7. Never make adjustments or repairs with the
engine running.
8. Grass catcher components are subject to wear,
damage and deterioration, which could expose
moving parts or allow objects to be thrown.
Frequently check components and replace with
manufacturer’s recommended parts, when
necessary.
9. Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves and use extra caution
when servicing them.
10. Check brake operation frequently. Adjust and
service as required.
Travel and transport on public roads
Check the relevant road traffic regulations before
driving the machine on a public road. If transporting
the machine on another vehicle always use
approved securing devices and make sure that the
machine is securely held.
Towing
If your machine has a hydrostatic transmission you
should only tow it very short distances at low speed
if absolutely necessary, otherwise the transmission
may be damaged.
Intended use
This machine is designed solely for cutting grass
on conventional lawns and other cleared and
leveled ground without obstacles, as rocks, stumps
etc., and, in conjunction with accessories supplied
by the manufacturer even for other special tasks
for which instructions are delivered with the
accessory. Use in any other way is considered as
contrary to the intended use. Compliance with and
strict adherence to the conditions of operation,
service and repair as specified by the manufacturer
also constitute essential elements of the intended
use.
This machine should be operated, serviced and
repaired only by persons who are familiar with its
particular characteristics and who are acquainted
with the relevant safety procedures.
Accident prevention regulations, all other generally
recognised regulations on safety and occupational
medicine, and all road traffic regulations must be
observed at all times.
Any arbitrary modifications carried out to this
machine may relieve the manufacturer of liability for
any resulting damage or injury.
Safe operation practices for Ride-On Mowers
Before starting cutting operations, train different
driving operations on an open ground without
people nearby until you feel familiar with handling
the equipment. This is particularly important if you
have no or little prior experience of driving a
vehicle.
Data indicates that operators, age 60 years and
above, are involved in a large percentage of riding
mower-related injuries. These operators should
evaluate their ability to operate the riding mower
safely in order to protect themselves and others
from serious injury.
Never carry children, even with the blades off. They
may fall off and be seriously injured or interfere with
safe machine operation.
Danger, keep hands and feet away
English – 3
INTRODUCTION
Dear customer
Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a
frontmounted cutting unit and a patented rear-wheel steering system. Riders are designed for maximum
efficiency even in small or confined areas. Collected controls and a hydrostatic transmission controlled by
pedals also contribute to the machine’s performance.
We hope you will find this operator’s manual very useful. By following its instructions (on operation, service,
maintenance, etc.) you will significantly extend the life of the machine and even its second-hand value.
When you sell your Rider, make sure you pass on the operator’s manual to the new owner.
Travel and transport on public roads
Check the relevant road traffic regulations before driving the machine on a public road. If transporting the
machine on another vehicle always use approved securing devices and make sure that the machine is
securely held.
Towing
Your machine is equipped with a hydrostatic transmission and, if necessary, you should only tow the
machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission.
Intended use
This machine has been designed to mow grass on lawns and other open and level ground surfaces without
obstacles such as stones, tree stubs, etc., even when the machine is equipped with special accessories
provided by the manufacturer, for which the operating instructions are provided in conjunction with delivery.
Use in any other way is considered as contrary to the intended use. Compliance with and strict adherence to
the conditions of operation, service and repair as specified by the manufacturer also constitute essential
elements of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury.
4 – English
INTRODUCTION
Good service
Husqvarna products are sold all over the world and only through servicing dealers. This is to ensure that you,
the customer, get the best support and service.
When you need spare parts or advice on service issues, warranty terms, etc., contact:
This Operator’s Manual belongs to
machine with serial number:
Engine Transmission
Serial number
The serial number can be found on the printed plate attached to the front, left-hand side under the seat.
Stated on the plate, from the top are:
• The type designation of the machine.
• The manufacturer’s type number.
• The serial number of the machine.
State the type designation and serial number when ordering spare parts.
The engine number is stated at a bar-code decal placed on the left side of the crankcase, in front of the
starter. The bar-code states:
• The serial number of the engine.
• Code.
Please state these when ordering spare parts.
The transmission’s serial number is stated on the barcode decal located on the front of the housing on the
left-hand drive axle:
• Type designation is stated above the barcode and starts with the letter “K”.
• The serial number is stated above the barcode and has the prefix “s/n”.
• The manufacturer’s type number is stated under the barcode and has the prefix “p/n”.
State the type designation and serial number when ordering spare parts.
English – 5
EXPLANATION OF SYMBOLS
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
N
Neutral Fast Slow Engine off Choke Fuel
Oil level Cutting height Backwards Forwards Ignition
Hydrostatic free wheel Use hearing protection Parking brake Warning
Never use the machine if persons, especially
children, or animals, are in the vicinity.
Keep hands and feet away from
moving parts.
STARTING INSTRUCTION
• READ OPERATOR´S MANUAL.
• CHECK ENGINE OIL LEVEL.
• ENGAGE PARKING BRAKE AND LIFT
CUTTING DECK IN TRANSPORT POSITION.
• IF ENGINE IS COLD USE CHOKE.
• START THE ENGINE.
• RELEASE PARKING BRAKE BEFORE DRIVING.
INSTRUCTIONS DE DEMARRAGE
• LIRE LE GUIDE DE CONDUITE.
• VÉRIFIEZ LE NIVEAU D´HUILE MOTEUR.
• SERREZ LE FREIN DE PARKING ET METTRE LE CARTER
DE COUPE EN POSITION HAUT.
• SI LE MOTEUR EST FROID, UTILISEZ LE STARTER.
• ACTIONNEZ LE DÉMARREUR.
• DESSERREZ LE FREIN DE PARKING
Never carry passengers on the
machine or equipment.
Warning!
Risk that the
machine can tip over
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
Never drive across a
slope
Drive very slowly
without the cutting unit.
6 – English
SAFETY INSTRUCTIONS
Safety instructions
These instructions are for your safety. Read them carefully.
WARNING!
The inserted symbol means that important safety instructions need to be observed. It
applies to your safety.
General use
• Read all the instructions in this operator’s
manual and on the machine before you start it.
Ensure you understand them and then observe
them.
• Learn how to use the machine and its controls
safely and learn to how to stop quickly. Also
learn to recognize the safety decals.
• Only allow the machine to be used by adults
who are familiar with its use.
• Make sure nobody else is in the vicinity of the
machine when you start the engine, engage the
drive or drive off.
• Make sure animals and people maintain a safe
distance from the machine.
• Stop the machine if any one enters the working
area.
• Clear the area of objects such as stones, toys,
wires, etc. that may become caught in the blades
and be thrown out.
• Look out for the ejector and do not direct it
towards anyone.
• Stop the engine and prevent it from starting
before you clean the cutting unit.
• Remember the operator is responsible for
danger or accidents.
• Never carry passengers. The machine is only
intended to be used by one person.
• Always look downwards and backwards before
and while reversing. Keep watch for both large
and small obstacles.
8010-047
Read the operator’s manual before starting the machine.
6003-002
Clear the area of objects before mowing.
• Slow before cornering.
• Switch off the blades when you are not mowing.
WARNING!
This machine can sever hands and feet as well as throw objects.
Failure to observe the safety instructions can result in serious injuries.
Never carry passengers.
8010-052
English – 7
SAFETY INSTRUCTIONS
• Take care when rounding a fixed object, so that
the blades do not hit it. Never run the machine
over foreign objects.
• Only use the machine in daylight or in other
well-lit conditions. Keep the machine at a safe
distance from holes or other irregularities in the
ground. Pay attention to other possible risks.
• Never use the machine if you are tired, if you
have consumed alcohol, or if you are taking
other drugs or medication that can affect your
vision, judgment or co-ordination.
• Keep an eye on the traffic when working close to
a road or when crossing it.
• Never leave the machine unsupervised with the
engine running. Always stop the blades, apply
the parking brake, stop the engine and remove
the keys before leaving the machine.
• Never allow children or other persons not
trained in the use of the machine to use or
service it. Local laws may regulate the age of
the user.
WARNING!
Engine exhaust, some of its
constituents and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive impairment. The
engine emits carbon monoxide,
which is a colourless, poisonous
gas. Do not use the machine in
enclosed spaces.
WARNING!
You must use approved personal protective equipment whenever you use the
machine. Personal protective equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen. Ask your dealer for help in
choosing the right equipment.
• Make sure that you have first aid equipment
close at hand when using the machine.
• Never use the machine when barefoot. Always
wear protective shoes or protective boots,
preferably with steel toes.
• Wear approved protective glasses or full-face
visor during assembly and when operating.
• Never wear loose fitting clothes that can catch in
moving parts.
• Use ear protectors to eliminate the risk for
impairment of hearing.
Keep children away from the area to be mowed.
6003-006
8 – English
Personal protective equipment.
8011-292
SAFETY INSTRUCTIONS
Driving on slopes
Driving on slopes is one of the operations where
the risk of the driver losing control of the machine
or of it overturning is the greatest; this can result in
serious injury or death. All slopes demand extra
care. If you cannot reverse up a slope or if you feel
unsure, do not mow it.
Proceed as follows:
• Remove obstacles such as stones, branches,
etc.
• Mow upwards and downwards, not sideways.
• Do not use the machine on ground that slopes
more than 15°.
• Avoid starting or stopping on a slope. If the tyres
start to slip, stop the blades and drive slowly
down the slope.
• Always drive smoothly and slowly on slopes.
• Do not make any sudden changes in speed or
direction.
Mow upwards and downwards on slopes, not sideways.
6003-004
• Avoid unnecessary turns on slopes, if
necessary, turn slowly and gradually downwards
if possible.
• Watch out for and avoid driving over furrows,
holes and bumps. It is easier for the machine to
overturn on uneven ground. Tall grass can hide
obstacles.
• Drive slowly. Do not turn the wheel sharply. The
machine engine-brakes better in low gear.
• Take extra care if any attachments are fitted that
can change the stability of the machine.
• Do not mow too close to edges, ditches or
banks. The machine can suddenly overturn if
one wheel comes over the edge of a steep
slope or a ditch, or if an edge gives way.
• Do not mow wet grass. It is slippery, and tyres
can lose their grip so that the machine skids.
• Do not try to stabilize the machine by putting
your foot on the ground.
• When cleaning under the machine, it may never
be driven near verges or ditches.
Be especially careful when driving on slopes.
8010-054
• Follow the manufacturer’s recommendations
regarding wheel weights or counterbalance
weights to increase stability.
English – 9
SAFETY INSTRUCTIONS
Children
Serious accidents may occur if you fail to be on
your guard for children in the vicinity of the
machine. Children are often attracted to the
machine and mowing.
• Never assume that children will remain where
you last saw them.
• Keep children away from the area to be mowed
and under close supervision by another adult.
• Keep an eye out and shut off the machine if
children enter the work area.
• Before and during reversing procedures, look
behind you and down for small children.
• Never allow children to ride along. They can fall
off and seriously injure themselves or be in the
way for safe manoeuvring of the machine.
• Never allow children to operate the machine.
• Be particularly careful near corners, bushes,
trees or other objects that block your view.
8010-057
Never allow children to operate the machine.
Maintenance
• Stop the engine. Prevent starting by removing
the ignition cable from the spark plug or remove
the ignition key before making any adjustments
or carrying out maintenance.
• Never fill the fuel tank indoors.
• Petrol and petrol fumes are poisonous and
extremely flammable. Be especially careful when
handling petrol, as carelessness can result in
personal injury or fire.
• Only store fuel in containers approved for the
purpose.
• Never remove the fuel cap and fill the petrol tank
while the engine is running.
• Allow the engine to cool before refuelling. Do not
smoke. Do not fill petrol in the vicinity of sparks
or naked flames.
• Pay attention to the risk of environmental
influence when handling oil, oil filter, fuel and
battery. Observe the local waste regulations.
• Electrical shock can cause injury. Do not touch
wires while the engine is running. Do not test the
ignition system using your fingers.
8010-058
Never fill the fuel tank indoors.
10 – English
SAFETY INSTRUCTIONS
• If leaks arise in the fuel system, the engine must
not be started until the problem has been
resolved.
• Store the machine and fuel in such a way that
there is no risk that leaking fuel or fumes can
cause any damage.
• Check the fuel level before each use and leave
space for the fuel to expand, because the heat
from the engine and the sun may otherwise
cause the fuel to expand and overflow.
• Avoid overfilling. If you spill petrol on the
machine, wipe up the spill and wait until it has
evaporated before starting the engine. If you spill
petrol on your clothing, change your clothing.
• Allow the machine to cool before performing any
actions in the engine compartment.
WARNING!
The engine and the exhaust
system become very hot during
operation.
Risk of burn injuries if touched.
• Be especially careful when handling battery
acid. Acid on the skin can cause serious
corrosive injuries. In the event of spillage on the
skin wash immediately with water.
• Acid in the eyes can cause blindness, contact a
doctor immediately.
• Take care with battery maintenance. Explosive
gases form in the battery. Never perform
maintenance on the battery while smoking or in
the vicinity of open flames or sparks. This can
cause the battery to explode and cause serious
injuries.
• Make sure all nuts and bolts are tightened
correctly and that the equipment is in good
condition.
• Do not modify safety equipment. Check regularly
to be sure it works properly. The machine must
not be driven if protective plates, protective
covers, safety switches or other protective
devices are not fitted or are defective.
• Do not change the setting of governors and
avoid running the engine at excessively high
revs. If you run too fast, you risk damaging the
machine components.
• Observe the risk of injury caused by moving or
hot parts if the engine is started with the engine
cover opened or the protective covers removed.
WARNING!
The battery contains lead and
lead pollutants, chemicals that
are considered to cause cancer,
birth defects or other
reproductive impairment. Wash
your hands after touching the
battery.
6003-009
Do not smoke when carrying out maintenance.
English – 11
SAFETY INSTRUCTIONS
• Never use the machine indoors or in spaces
lacking proper ventilation. Exhaust fumes
contain carbon monoxide, an odourless,
poisonous and highly dangerous gas.
• Stop and inspect the equipment if you run over
or into anything. If necessary, make repairs
before starting.
• Never make adjustments with the engine
running.
• The machine is tested and approved only with
the equipment originally provided or
recommended by the manufacturer.
• The blades are sharp and can cause cuts. Wrap
the blades or wear protective gloves when
handling them.
• Check regularly that the parking brake works.
Adjust and maintain as required.
• The mulching unit should only be used where
better quality mowing is required and in known
areas.
• Reduce the risk of fire by removing grass,
leaves and other debris that may have fastened
on the machine. Allow the machine to cool
before putting it in storage.
Transport
• The machine is heavy and can cause serious
crush injuries. Be especially careful when it is
loaded in or out of a car or on and off of a trailer.
• Use an approved trailer to transport the
machine. Activate the parking brake and secure
the machine using approved fasteners, such as
tension belts, chains or ropes when
transporting.
Never run the machine in an enclosed area.
8009-467
8010-061
Regularly clean grass, leaves and other debris from the
machine.
• Check and observe local road traffic regulations
before transporting or driving the machine on
roads.
12 – English
IMPORTANT INFORMATION
The parking brake is not sufficient to lock
the machine during transport. Ensure you
secure the machine firmly to the transporting vehicle. Reverse the machine on to
the transporting vehicle to prevent it from
overturning.
Presentation
PRESENTATION
Congratulations on your choice of a top quality
product which you will enjoy for many years.
These instructions describe the Rider 15V2. This
rider mower is equipped with a 15 horsepower
Kawasaki engine.
The power transmission from the engine is handled
by a hydrostatic gearbox, which allows variable
variation of the speed by using the pedals.
There is one pedal for driving forwards and one
pedal for reversing.
6017-213
Location of the controls
1. Ignition lock
2. Choke lever
3. Throttle lever
4. Adjustment of cutting height
5. Lifting lever, cutting unit
6. Speed limiter for reversing
7. Speed limiter for driving forwards
6017-239
8. Parking brake
9. Lock button for parking brake
10. Lever for adjusting seat
11. Fuel tank cap
12. Main lock (under seat)
13. Lever for disengagement of drive
English – 13
PRESENTATION
1
2
Throttle control
The throttle control regulates the engine speed,
and thereby also the rotation speed of the blades.
To increase or reduce the engine speed the control
is moved forwards or backwards.
Avoid idling the engine for long periods, as there is
a risk of carbon build-up on the spark plugs.
Choke lever
The choke lever is used for cold starting and to
give the engine a richer fuel mixture.
For cold starting the lever is moved backwards to
its end position.
6017-127
Speed limiter
The speed of the machine is steplessly regulated
with two pedals. Pedal (1) is used to drive forwards
and pedal (2) for reversing.
WARNING!
Make sure that branches do not
obstruct the pedals when mowing
under bushes, otherwise you may
lose control.
Parking brake
The parking brake is activated as follows:
6017-128
2
1
6017-214A
1. Press down the parking brake pedal (1).
2. Press in the lock button (2) on the steering
column.
3. Release the parking brake pedal while keeping
the button pressed in.
The parking brake lock is automatically disengaged
when the parking brake pedal is pressed down.
14 – English
6017-011
Loading...