Accessories
SPARE PARTS
Although Husky maintains a vast inventory of standard hot runner components, non-standard components are not kept
in stock. It is recommended that spares of specific wear items and non-standard components be ordered alo ng with the
system to ensure that these are immediately available when required.
Since the molding requirements of each application vary, contact Husky for recommended spare part packages.
VALVE GATE AIR KIT
To ensure optimum valve stem actuation, Husky recommends that all valve gate hot runner systems be equipped with a
valve gate air kit. This kit includes a filter and oil separator (#1), exhaust silencers (#2 and #5), a solenoid valve (#3 specify 24V DC or 110V AC) and quick exhaust valves (#4), as well as all fittings and hoses required for installation.
2006.08
Voltage Part #
110V (AC) 512926
24V (DC) 512846
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
182
ELECTICAL CONNECTORS
Introduction
Electrical connectors are
supplied with complete hot
runner systems. Husky can
supply three configurations
of electrical connectors: 24
pin, 25 pin and 32 pin. The
majority of Pronto™
manifolds use two 24 pin
connectors or alternately a
25 pin and a 24 pin
connectors in combination.
Eight drop manifolds with
four manifold zones require
two 32 pin connectors. The
installation geometry for
each connector is shown at
right.
24 pin Connector Installation
130.00
32.00
[1.260]
PE
M8 (4)
5
/
[ - 18]
16
25 pin Connector Installation
17.50
[0.689]
[5.118]
90.0
[3.54]
R 17.5 (2)
M6
1
/
[ - 20]
4
86.00
[3.386]
50.6
[1.99]
[0.69]
R 1.5
[0.06]
50.0
[1.97]
PE
M8 (4)
5
/
[ - 18]
16
M6
1
/
[ - 20]
4
32 pin Connector Installation
42.00
[1.654]
PE
M8 (4)
5
/
[ - 18]
16
M6
1
/
[ - 20]
4
R 12.7 (2)
[0.50]
92.00
[3.622]
45.0
[1.77]
R 17.5 (4)
[0.69]
R 1.5
[0.06]
R 1.5
[0.06]
50.0
15.0
50.0
[1.97]
[0.59]
[1.97]
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
183
2006.08
Accessories
LOCATING RING
The locating ring performs two basic functions:
• Provides alignment of the hot runner to the injection molding machine.
• Prevents resin drool from entering the hot runner manifold pocket.
The locating ring type used for a particular application depends upon: the machine platen locating hole diameter, and
backing plate thickness.
2006.08
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
184
Accessories
TOOLS
The use of standard Husky hot runner tools simplifies maintenance and reduces the likelihood of component damage.
Contact Husky to order any of the tools in this section.
Valve Stem Removal Tool (VG/VX)
To ensure the valve stems are pulled straig ht
during removal, the valve stem removal tool is
recommended. Tools are selected based on valve
stem length and cylinder size.
Length Part #
500 All lengths
750 up to 160,0 (6.30") 512849
750 up to 251,0 (9.88") 512859
1000 All lengths 2505612
1250 All lengths 2026694
Nozzle Tip Socket
A deep access socket is used for nozzle tip installation and removal. Proper
torque values are identified in the supplied assembly drawing.
Puller
Threaded nut
Part #
250 1501813*
500
750 531983
1000
1250 1503071
Bi-Metal Heater Removal Tool
A threaded extraction tool that assists when removing a bi- metal heater while
the hot runner is still clamped to the machine platen.
Heater Removal Tool
Heater Front
Ring
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
2006.08
185
Length Part #
500 All Lengths
750 All Lengths 535160
1000 All Lengths 2410903
1250 All Lengths 535237
Loading...