Husky HRDC-1250 User Manual
Nozzle Selection 1250 Series
1250 SERIES DESIGN INFORMATION 1250 Series Nozzle Pitch
Minimum nozzle pitch dimensions for the 1250 Series nozzle are
provided to the right and below. For applications that exceed 8
drops, .
Thermal Gate
NOTE: The sprue minimum radius 80.8 mm (3.18") and all other
minimum distances must be satisfied.
Valve Gate
NOTE: The sprue minimum radius 105.0 mm (4.13") and all
other minimum distances must be satisfied.
> R 80.8
[3.18]
Thermal Gate
> 100.0
[3.94]
Valve Gate
> 125.0
[4.92]
[4.98]
> 126.5
100.0
[3.94]
Contact Husky for more information
2006.08
>R 105.0
[4.13]
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
148
[6.64]
> 168.7
125.0
[4.92]
Plate Sizing - Pocket Detail
Nozzle Selection1250 Series VG
Nominal dimensions shown for layout purpose only
Actual dimensions dependent on operating temperatures.
1250 Series VG Plate Sizing
Number of Drops Manifold Thickness B
1 - 8 45 (1.77") 138.6 (5.457")
Gating Method ML Range
VG 290 (11.4") - 600 (23.6")
VX 285 (11.2") - 600 (23.6")
Contact Husky for more information
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
149
2006.08
Nozzle Selection 1250 Series VG
Gate Detail - VX
Contact Husky with any gate insert back-up concerns.
62.0 [2.44]
Gate Detail - VG
16.000 +0.010
[.6299 +.0004]
62.0 [2.44]
40.30 [1.587]
28.000 +0.005
[1.1024 +.0002]
110
30
Ra0.4
Ra0.8
130
30
16.5
[.65]
R 3,0
[.12]
Ra0.8
Ra0.4
R 3.0
2.50
[.12]
Ra0.8
[.098]
1.0
30
[.04]
7.03
90
15’
Ra0.4
17.63 [.694]
[.277]
Ra0.8
SR 12,70 0,04
[.500 .002]
G
2006.08
Ra0.8
R 1.3
[.05]
Please confirm all dimensions and nozzle/gating suitability with Husky prior to machining.
1.5
[.06]
11.4
[.45]
17.0 [.67]
G
is application specific, contact Husky prior to machining.
150
Loading...