Humanscale M/Connect MCM8B, M/Connect MCM8BT, M/Connect MCM8ST, M/Connect MCM8WT, M/Connect MCM2BT User Manual
...
M/CONNECT
USER GUIDE
Table of Contents
PARTS REQUIRED 3
IDENTIFYING COMPONENTS 4
INSTALLING M/CONNECT SOFTWARE 6
INSTALLING M/CONNECT BASE 7
ATTACHING A MONITOR ARM 8
INSTALLING THE CABLE CHANNELS 10
CONNECTING MONITORS 11
USING M/CONNECT 12
TROUBLESHOOTING 13
PRODUCT SPECIFICATIONS 14
ELECTRICAL SPECIFICATIONS 15
PARTS REQUIRED
M/Connect Parts
A (1) M/Connect Hub and Dock Clamp
B (2) Cable Channels (Provided if ordered in configuration)
C (1) USB 3.0 Upstream Cable
D (1) Power Adaptor
E (1) Power Cable (localized)
A
B
C D
E
3
IDENTIFYING COMPONENTS
1 2 3
4
Front Panel
Component Description
3.5 mm TRRS jack To connect combined headphone and microphone headset
1
USB 3.0 port To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible)
2
USB 3.0 port To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible)
3
4
DC in 5V / 8A DC to power M/Connect
Rear Panel
4
IDENTIFYING COMPONENTS
4 5
1
Left Panel Right Panel
Component Description
1
Gigabit Ethernet port To connect to local area network
2
DisplayPort port To connect an DisplayPort monitor
3
HDMI Port To connect an HDMI monitor
4
USB 3.0 upstream port To connect a notebook / computer
5
USB 3.0 port with
battery-charging
function
6
USB 3.0 port To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible)
7
USB 3.0 port To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible)
8
USB 3.0 port with
battery-charging function
To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible). USB port is
compatible for quick-charging BC1.2 compatible devices
To connect USB devices (USB 1.0, 1.1, 2.0, 3.0 compatible). USB port is
compatible for quick-charging BC1.2 compatible devices
62 73 8
5
INSTALLING M/CONNECT SOFTWARE
STEP 1
M/Connect Driver Installation Instructions
YOU MUST INSTALL THE NECESSARY DRIVERS ONTO YOUR COMPUTER BEFORE
USING M/CONNECT. THIS WILL ENSURE PROPER OPERATION.
NOTE: For proper installation of the DisplayLink drivers, it is important to make sure your
USB 3.0 Host Controller Driver and Graphics Adapter Driver are up to date
• Go to http://www.displaylink.com/downloads/
• Choose your operating system
• Download and install the latest driver
• Ready to go!
TROUBLESHOOTING
We recommend following these guidelines as a best practice.
Ensure installation isn’t blocked by a corporate firewall
If your firewall blocks the installation of this driver, corporate users should contact their systems administrator and have them allow
this driver under their corporate installation standard procedures (MSI Installer), available for download from DisplayLink’s website.
Individual users should ensure that suggestions to update other drivers are followed. This typically includes updating the laptop
graphics and USB drivers to the latest version.
Updating the host graphics drivers to the latest version: For Windows 7, USB laptop drivers are provided by Intel/ OEM notebook
vendors. Users have to update this manually. Please refer to http://support.displaylink.com for more details. For Windows 8 onwards,
laptop drivers are provided by Microsoft and updated in the system via Windows update.
For the best user experience, we recommend running the latest version of the driver.
6
Loading...