HP EliteDisplay S240uj Disassembly Instructions Manual
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay S240uj 23.8-inch USB-C Wireless Charging Monitor
1.0 Items Requiring Selective Treatment
Quantity
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
4
Batteries
All types including standard alkaline and lithium
coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB /PCT)
14
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
5
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Product End-of-Life Disassembly Instructions
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within t he product which require selective treatment in the right column, as
applicable.
Item Description Notes
weighing > 25 grams (not including PCBs or PCAs
of items
included
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
Tool Description
Tool Size (if
applicable)
Description #1 Screw driver of "+" type
Description #2 Hexagonal nut screw driver for DVI and D-SUB connector
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
and materials requiring selective treatment can be removed.
3.1 List the basic steps that should typically be f oll owed to remove components and materials requiring selective treatment:
1. Lay the monitor on a flat, soft and clean surface.
2. Open the latches of stand cov er with tool.
3. Remove the screws to separat e stand ass'y.
4. Remove the rear cover via open latches by tool.
5. Remove the hinge.
6. Remove the screws to remove the speakers
7. Remove the screws and t ear off all tapes.
8. Disconnect the Pins and white tape to remove the mainframe.
9. Remove the screws to separat e m iddle frame and panel.
10. Remove the main boards and USB board.
11. Open all latches of base by tool.
12. Remove the screws, disconnect the cables to rem ove wireless charging module.
13.
14.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the item s
contained in the product that require selective t reat ment (with descriptions and arrows identify i ng l ocat i ons).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Loading...