Honeywell Sensepoint Pro Data sheet
Sensepoint Pro
Comprehensive monitoring of
flammable, toxic and oxygen
gas hazards in potentially
explosive atmospheres
Sensepoint Pro
One-Stop Shop
• Flammable, toxic and oxygen
versions available
• Suitable for indoor or outdoor use
• IP65 as standard
Proven Sensor Technology
• SurecellTM electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life
Global Certifications*
• US, Canada and Europe
• Compliant with UL, CSA and
ATEX standards
• Includes hazardous area and
performance approval
Convenient to Use
• Backlit LCD for dark environments
• Fully configurable via IR remote control
• 4-20mA and relay operation
• Auto-inhibit during maintenance
Cost Effective
• Minimal training required
• Non-intrusive, one-man operation
• Plug-in sensor replacement
• All necessary accessories included
Friendly Installation
• Universal mounting bracket
• 3⁄4” NPT and M20 entries included as
standard
• Suitable for conduit or SWA cable/
glands installations
Range of Accessories
• Flow adaptor
• Duct mounting kit
• Collecting cone
*Pending - Contact Honeywell Analytics for more
information
The Sensepoint Pro provides comprehensive
monitoring of flammable, toxic and oxygen gas
hazards in potentially explosive atmospheres,
both in and out of doors. Users can modify
detector operation using the remote control
provided without ever needing to open the
unit. This enables one man, non-intrusive,
operation and reduces routine maintenance
time and costs.
All detectors are supplied pre-configured and
include two programmable alarm relays as well
as an industry standard 4-20mA output.
The scale, range, calibration, relay operation
and alarm set points of the detector may all be
adjustedviathetransmitters’backlitLCDand
an intrinsically safe remote control that is also
suitable for use in potentially explosive
atmospheres. Outputs are automatically
inhibited during adjustment thereby reducing
the risk of false alarm at the control panel
during maintenance.
Sensepoint Pro is supplied with all necessary
accessories for easy installation. The detector
can be mounted on a wall or round support
pole using the universal bracket provided.
The detector is ideal for use with either
conduit or steel wire armored cable and
glands.A3/4”NPTentryandM20adaptor
are included as standard. A weatherproof
cap is also included for use in the harshest
outdoor conditions.
Overall, the Sensepoint Pro ensures easy
installation and the fastest routine operation by
removing the need for hot work permits in
hazardous areas. Using an easy to replace
plug-in sensor, downtime is also reduced and
on-going costs are minimized through the use
of poison resistant flammable sensors and
patented SurecellTM toxic sensor technology.
Sensepoint Pro meets the more demanding
user requirements but assures you of the most
cost effective solution to your gas detection
needs in the long run.
Loading...