Honeywell Sensepoint Plus Data sheet

Sensepoint Plus

The Sensepoint Plus monitors
flammable, toxic and oxygen
gas hazards in potentially
explosive atmospheres

Sensepoint Plus

One-Stop Shop

• Flammable, toxic and oxygen versions available

• Suitable for indoor or outdoor use

• IP65 as standard

Proven Sensor Technology

• SurecellTM electrochemical sensors

• Poison resistant catalytic bead

• Fast and reliable

• Typical 2 to 5 years operational life

Global Certifications*

• US and Europe

• UL and ATEX hazardous area approvals

Convenient to Use

• Industry standard 4-20mA output

• Built in ‘inhibit’ switch

• User configurable setting

• Ideal for PLC based systems

Cost Effective

• Minimal training required

• One-man operation

• Plug-in sensor replacement

• All necessary accessories included

Friendly Installation

• Universal mounting bracket

• Metric and NPT compatible

• Suitable for conduit or armored

cable/glands installations

Range of Accessories

• Calibration cup

• Duct mounting kit

• Collecting cone

*Pending - Contact Honeywell Analytics

for more information

The Sensepoint Plus monitors flammable,
toxic and oxygen gas hazards in potentially
explosive atmospheres and provides an
industry standard 4-20mA output for
connection to a wide range of control
equipment. Incorporation of a transmitter at
the sensor enables a single user to carry out
routine maintenance of the detector and
removes the need for additional personnel
at the associated controller.

The built-in transmitter includes a user configurable

‘inhibitswitch’thatclampsthecurrentoutputofthe

detector to a known level so that during
maintenance no false alarms can be triggered at
associated control equipment. As such, the
Sensepoint Plus can be easily maintained even

whenusedwith‘blind’PLCtypecontrolsystems.

Sensepoint Plus is supplied with all necessary
accessories for easy installation. The detector can
be mounted on a wall or round support pole using
the universal bracket provided. The detector is ideal
for use with either conduit or armored cable and
glands. A 3/4"NPT entry and M20 adaptor are
supplied as standard. A weatherproof cap is also
included for use in the harshest outdoor conditions.

Overall, the Sensepoint Plus provides easy
installation and simple maintenance. Using an easy
to replace plug-in sensor, downtime is reduced and
the on-going costs of ownership is minimized
through the use of poison resistant flammable
sensors and patented SurecellTM toxic sensor
technology.

SensepointPlusandtheHoneywellAnalytic’srange

of industrial gas detection systems can
be trusted to provide a safe working environment
for all.

Installation Details

Sensepoint Plus is designed for use in
potentially explosive atmospheres. As such,
installation should follow national guidelines
using suitably approved armored cable
and glands (M20 or 3/4"NPT) or conduit
(3/4"NPT).

Use screened 0.5mm2 (20AWG) to 2.5mm2
(14AWG) cross sectional area cable, as
needed to ensure minimum operating voltage
at the detector, depending upon installed
cable length.

Various accessories are available for
different applications.

Pole Mount

Duct Mount

Wall Mount

Collecting Cone

Dimensions

174.8mm / 6.9"

74.0mm / 2.9"

Electrical Connections

126.2mm / 5.0"

36.0mm / 1.4"

104.0mm / 4.1"

107.0mm / 4.2"

ø 20.0 - 80.0mm

/ 0.8 - 3.1"

102.0mm / 4.0"

100ohm

Technical Summary

General Specification

Use 3 wire, 4-20mA, fixed point gas detector for the protection of personnel and plant from flammable, toxic and oxygen gas hazards.
Incorporating transmitter with user configurable ‘inhibit’ switch to facilitate one man operation

Detectable Gases

Gas Measuring Range Operating Temperature*

Ident Name 1# 2 3 Min Max

F Flammable 0-100% LEL -20°C / -4°F 50°C / 122°F

O Oxygen 0-25% VOL -15°C / 5°F 40°C / 104°F

+

C Carbon Monoxide

H Hydrogen Sulfide

G Hydrogen 0-1000ppm -5°C / 23°F 40°C / 104°F

+ SureCellTM Sensing Technology

Construction

Electrical

3 x screw terminals for 0.5mm

Maximum operating current: 200mA (flammable), 30mA (toxic and oxygen)
Maximum peak in rush current: 400mA

Signal 4-20mA Normal operation: 0-100% full scale
2mA or 4mA Output inhibited (17.4mA Oxygen only)
0mA Sensor fault
22mA Maximum over range

Material Main body: Powder coated aluminum (ADC12)

Sensor: 316 stainless steel
Weatherproof cap: Aluminum, 316 stainless steel mesh

Weight 950g

Certification Ex II 2 G D EEx d IIC T6 Class 1, Div 1, Groups B, C, D

T

Applicable Standards North America: UL1203

Standards Europe: CE, ATEX, EMC (EN50270)

Contact Honeywell Analytics for latest approval information

Environmental

IP Rating IP65 as standard in accordance with EN60529:1992

Operating Temperature Dependent upon gas type and certification

Operating Humidity Range Continuous: 20-90%RH (non condensing), Intermittent: 10-99%RH (non condensing)

Operating Pressure 90-110kPa

Storage Conditions Instrument -40°C to +50°C (-40°F to +122°F)

0-200ppm 0-500ppm -20°C / -4°F 50°C / 122°F

+

0-50ppm 0-20ppm 0-100ppm -20°C / -4°F 50°C / 122°F

#

Standard *Check certified temperature

3 wire connection, 12-30Vdc, 4-20mA (source), common 0Vdc

2

(20AWG) to 2.5mm2 (14AWG)

= -20°C to +50°C / -4°F to +122°F T

amb

= -20°C to +50°C / -4°F to +122°F)

amb

* Oxygen detection products must only be used to detect oxygen depletion in air.

Ordering Information

Ordering Information

e.g. SP PL U X F 1 = SPPLUXF1

STANDARDS

U USA (UL)
A Europe (ATEX)

Standard Supply Each detector is supplied complete with 3/4"NPT entry, 3/4"NPT to M20 adaptor, wall mounting bracket,

pole mounting bracket, weatherproof cap, Allen keys (for bracket), and instruction leaflet all sealed in a
plastic bag inside a shipping carton

Shipping Details Shipping carton dimensions: L312mm (12.3") x W223mm (8.8") x D110mm (4.3")
Approximate weight: 1000g

Optional Accessories SPPPCC Collecting cone
SPPPCAL Flow adaptor
SPPPDM Duct mounting kit

Calibration Equipment Contact Honeywell Analytics Representative

RANGE

1 Refer to

2 Detectable Gases

}

3 Table Above

GAS TYPE

F Flammable
O Oxygen
C Carbon Monoxide
H Hydrogen Sulfide
G Hydrogen

Find out more

Contact Honeywell Analytics:

www.honeywellanalytics.com

Europe, Middle East, Africa

Life Safety Distribution AG
Wilstrasse 11-U31
CH-8610 Uster
Switzerland
Tel: [phone]
Fax: [phone]
[e-mail]

Our Product Range

Find out more

Contact Honeywell Analytics:

www.honeywellanalytics.com

Europe, Middle East, Africa

Life Safety Distribution AG
Wilstrasse 11-U31
CH-8610 Uster
Switzerland
Tel: [phone]
Fax: [phone]
[e-mail]

Americas

Honeywell Analytics Distribution, Inc.
405 Barclay Blvd.
Lincolnshire, IL 60069
USA
Tel: [phone]
Toll free: [phone]
Fax: [phone]
[e-mail]

Find out more

Contact Honeywell Analytics:

www.honeywellanalytics.com

Europe, Middle East, Africa

Life Safety Distribution AG
Wilstrasse 11-U31
CH-8610 Uster
Switzerland
Tel: [phone]
Fax: [phone]
[e-mail]

Americas

Honeywell Analytics Distribution, Inc.
405 Barclay Blvd.
Lincolnshire, IL 60069
USA
Tel: [phone]
Toll free: [phone]
Fax: [phone]
[e-mail]

Asia Pacific

Honeywell Analytics Asia Pacific
#508, Kolon Science Valley (1)
187-10 Guro-Dong, Guro-Gu
Seoul, 152-050,
Korea
Tel: [phone]
Fax: [phone]
[e-mail]

Find out more

Contact Honeywell Analytics:

www.honeywellanalytics.com

Europe, Middle East, Africa

Life Safety Distribution AG
Wilstrasse 11-U31
CH-8610 Uster
Switzerland
Tel: [phone]
Fax: [phone]
[e-mail]

Americas

Honeywell Analytics Distribution, Inc.
405 Barclay Blvd.
Lincolnshire, IL 60069
USA
Tel: [phone]
Toll free: [phone]
Fax: [phone]
[e-mail]

www.honeywell.com

Technical Services

[e-mail]

Asia Pacific

Honeywell Analytics Asia Pacific
#508, Kolon Science Valley (1)
187-10 Guro-Dong, Guro-Gu
Seoul, 152-050,
Korea
Tel: [phone]
Fax: [phone]
[e-mail]

Fixed Gas Monitoring

Honeywell Analytics offers a wide range
of fixed gas detection solutions for a
diverse array of industries and applications
including: Commercial properties, industrial
applications, semiconductor manufacturers,
energy plants and petrochemical sites.

Detection of flammable, oxygen and toxic

»

gases (including exotics)

Innovative use of 4 core sensing

»

 technologies–papertape,
electrochemical cell, catalytic bead
and infrared

Capability to detect down to Parts Per

»

Billion (ppb) or Percent by Volume (%v/v)

Cost effective regulatory compliance

»

solutions

Please Note:

While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions.
Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations,
standards, and guidelines. This publication is not intended to form the basis of a contract.

H_Sensepoint Plus_DS0327_V3_EMEA

09/07

© 2007 Honeywell Analytics

Portable Gas Monitoring

When it comes to personal protection from
gas hazards, Honeywell Analytics has a wide
range of reliable solutions ideally suited for
use in confined or enclosed spaces.
These include:

Detection of flammable, oxygen and

»

toxic gases

Singlegaspersonalmonitors–wornby

»

the individual

Multi-gasportablegasmonitors–used

»

for confined space entry and regulatory
compliance

Multi-gastransportablemonitors–used

»

for temporary protection of area
during site construction and
maintenance activities

Technical Services

At Honeywell Analytics, we believe in the
value of great service and customer care.
Our key commitment is providing complete
and total customer satisfaction. Here are just
a few of the services we can offer:

Full technical support

»

Expert team on hand to answer

»

questions and queries

Fully equipped workshops to ensure

»

quick turnaround on repairs

Comprehensive service engineer network

»

Training on product use and maintenance

»

Mobile calibration service

»

Customised programmes of

»

preventative/corrective maintenance

Extended warranties on products

»

11133