Honeywell Galaxy 8, Galaxy 18, Galaxy 128, Galaxy 60, Galaxy 500 User Manual
...
User Guide
B
ent
esc
A
1
2 3
4
5
6
7 8 9
0
#
*
GALAXY 504 V2.00
16:32 MON 10 OCT
Galaxy
8/18/60/128/500/504/512
Galaxy 8/18/60/128/500/504/512 User Guide
iii
TABLE OF CONTENTS
Introduction-------------------------------------------------------------------------------------------------------- V
Keypad Information --------------------------------------------------------------------------------------------- 1
Setting the System ---------------------------------------------------------------------------------------------- 3
Before Setting ------------------------------------------------------------------------------------------------- 3
Entering a Pin ------------------------------------------------------------------------------------------------- 3
Setting Groups ------------------------------------------------------------------------------------------------ 3
Exit Time -------------------------------------------------------------------------------------------------------- 3
Sounder --------------------------------------------------------------------------------------------------------- 4
Zones Open ---------------------------------------------------------------------------------------------------- 4
Final Door/Terminator --------------------------------------------------------------------------------------- 4
System Set ----------------------------------------------------------------------------------------------------- 4
Part Setting----------------------------------------------------------------------------------------------------- 4
Cancelling Setting -------------------------------------------------------------------------------------------- 4
Group Name --------------------------------------------------------------------------------------------------- 4
Unsetting the System ------------------------------------------------------------------------------------------ 5
Normal Entry --------------------------------------------------------------------------------------------------- 5
Straying from the Entry Route----------------------------------------------------------------------------- 5
Slow Entry ------------------------------------------------------------------------------------------------------ 5
Cancelling Alarms -------------------------------------------------------------------------------------------- 5
Manager Reset ------------------------------------------------------------------------------------------------ 5
Engineer Reset------------------------------------------------------------------------------------------------ 5
Menu Options ----------------------------------------------------------------------------------------------------- 6
Accessing the Menu ----------------------------------------------------------------------------------------- 7
Full Menu ------------------------------------------------------------------------------------------------------- 6
Quick Menu ---------------------------------------------------------------------------------------------------- 6
Omit Zones--------------------------------------------------------------------------------------------------------- 8
Selecting Omit Zones---------------------------------------------------------------------------------------- 8
Viewing Eligible Zones -------------------------------------------------------------------------------------- 8
Omitting Zones ------------------------------------------------------------------------------------------------ 8
Setting With Omitted Zones-------------------------------------------------------------------------------- 8
Vibration Zones ----------------------------------------------------------------------------------------------- 8
ATM Zones ----------------------------------------------------------------------------------------------------- 9
Forced Set---------------------------------------------------------------------------------------------------------- 9
Selecting Forces Set----------------------------------------------------------------------------------------- 9
Non-omittable Zones ---------------------------------------------------------------------------------------- 9
Chime ---------------------------------------------------------------------------------------------------------------10
Selecting Chime ---------------------------------------------------------------------------------------------10
Chime in Operation -----------------------------------------------------------------------------------------10
Display Zones ----------------------------------------------------------------------------------------------------10
Selecting Display Zones -----------------------------------------------------------------------------------10
Address --------------------------------------------------------------------------------------------------------10
Function --------------------------------------------------------------------------------------------------------10
Status -----------------------------------------------------------------------------------------------------------11
Description ----------------------------------------------------------------------------------------------------11
Selecting and Viewing--------------------------------------------------------------------------------------11
Escape ---------------------------------------------------------------------------------------------------------11
Display Log ------------------------------------------------------------------------------------------------------- 1 1
User Guide Galaxy 8/18/60/128/500/504/512
iv
Events ----------------------------------------------------------------------------------------------------------11
Selecting a date----------------------------------------------------------------------------------------------11
Viewing Each Event-----------------------------------------------------------------------------------------11
Additional Information -------------------------------------------------------------------------------------- 1 2
Printing --------------------------------------------------------------------------------------------------------- 12
Print --------------------------------------------------------------------------------------------------------------- 1 2
Selecting Print ------------------------------------------------------------------------------------------------12
Codes-----------------------------------------------------------------------------------------------------------12
Zones -----------------------------------------------------------------------------------------------------------12
Log -------------------------------------------------------------------------------------------------------------- 1 2
All ---------------------------------------------------------------------------------------------------------------12
Help Message ------------------------------------------------------------------------------------------------ 1 2
Walk Test-----------------------------------------------------------------------------------------------------------13
Selecting Walk Test-----------------------------------------------------------------------------------------13
All Zones -------------------------------------------------------------------------------------------------------13
Selected Zones ---------------------------------------------------------------------------------------------- 1 3
Ending Walk Test--------------------------------------------------------------------------------------------13
Time and Date----------------------------------------------------------------------------------------------------14
Selecting Time and Date ----------------------------------------------------------------------------------14
Changing Time -----------------------------------------------------------------------------------------------1 4
Changing Date -----------------------------------------------------------------------------------------------14
Advance and Retard ----------------------------------------------------------------------------------------14
Codes ---------------------------------------------------------------------------------------------------------------1 5
Selecting Codes --------------------------------------------------------------------------------------------- 16
User Codes----------------------------------------------------------------------------------------------------1 6
Modify PIN-----------------------------------------------------------------------------------------------------1 6
Modify Level --------------------------------------------------------------------------------------------------17
Duress Code --------------------------------------------------------------------------------------------------17
Modify Name--------------------------------------------------------------------------------------------------1 8
Time Zone -----------------------------------------------------------------------------------------------------18
Temporary Codes -------------------------------------------------------------------------------------------1 9
PIN Change Codes -----------------------------------------------------------------------------------------19
Modify Groups ------------------------------------------------------------------------------------------------20
Group Choice -------------------------------------------------------------------------------------------------21
MAX Number -------------------------------------------------------------------------------------------------21
MAX Function-------------------------------------------------------------------------------------------------2 2
MAX Keypad --------------------------------------------------------------------------------------------------22
PIN Warning --------------------------------------------------------------------------------------------------23
MAX Users ----------------------------------------------------------------------------------------------------23
Groups----------------------------------------------------------------------------------------------------------24
Summer --------------------------------------------------------------------------------------------------------24
Avoiding False Alarms ------------------------------------------------------------------------------------------ 25
Zone Reference Table ------------------------------------------------------------------------------------------ 26
Alarm Help Messages-------------------------------------------------------------------------------------------27
Installer Details ---------------------------------------------------------------------------------------------------28
Galaxy 8/18/60/128/500/504/512 User Guide
v
INTRODUCTION
The Galaxy alarm system is, in fact, a computer which has been designed using the latest
software and hardware technology.
First and foremost, the Galaxy meets all your security needs. The engineer will program and
commission the system to your own exacting requirements.
Galaxy 8/18/60/128/500/504/512 User Guide
1
Keypad Information
General
The Galaxy Alarm system is controlled by Galaxy Mk7 Full Alpha Liquid Crystal Display
(LCD) keypads. A maximum of 16 keypads may be connected to the Galaxy 8, 18 and 60
and 128 control panels. A maximum of 32 keypads may be attached to the Galaxy 500, 504
and 512 control panels.
NUMBER KEYS (0 – 9)
These keys are used to enter the code and to select and modify options.
Before carrying out operations on the system, users must identify themselves with a Personal
Identification Number (PIN). This number is a 4, 5 or 6 digit number selected from keys 0 - 9.
The number keys are also used where groups are programmed on the system permitting
groups (areas) to be set or unset.
VIEW KEYS (A and B)
These keys have been programmed to activate one of the system options. Pressing the A > key
after a valid code has been entered starts the full set routine. Pressing the < B key after a valid
code has been entered starts the part set routine.
Once a system option has been selected, the A > or < B keys can be used to operate as view
keys, stepping forwards (A >) or backwards (< B) through lists of information. Holding down
a view key while viewing an option list, rapidly displays each item in the list, permitting quick
access to the information.
Star key
Power
LED
LCD
display
Number keys
View keys
Enter key
Escape key
Hash key
B
ent
esc
A
1
2 3
4
5
6
7 8 9
0
#
*
GALAXY 504 V2.00
16:32 MON 10 OCT
User Guide Galaxy 8/18/60/128/500/504/512
2
ENTER KEY (ent)
The ent key accepts and processes entered data. Valid actions are performed and the next
option is accessed.
ESCAPE KEY (esc)
The esc key aborts the current option to return to the previous option level. Any option
modification made prior to the option being aborted is erased. Successive pressing of the esc
key returns the user to the start display (known as the BANNER).
The esc key also aborts the setting routine if pressed during the exit time.
HASH KEY (#)
The # key is used to display additional choices for certain options, e.g. ADVANCE/RETARD
the time in the TIME/DATE option.
This key is also used as the user duress key (by pressing twice following a valid code
entry).
STAR KEY (*)
The * key is used to provide additional features for certain options, e.g. printing the event log
or deleting entries.
POWER LED
The green power LED remains lit whenever the keypad is connected to a mains power
supply. A mains power failure is indicated by the LED flashing slowly. The LED flashes
rapidly if the battery voltage falls below the minimum threshold or if one of the fuses on the
control panel PCB blows.
BANNER
The banner is the display shown on the keypad, e.g. Galaxy 504 V2.00 (with the time and
date on the bottom line). This is shown at all times when the system is unset, unless the menu
is being accessed or an alarm or help message is on the display. The banner can be changed
by the engineer. In the set condition the banner is normally blank.
USER CODES
The user code is a unique four, five or six digit PIN (Personal Identification Number). The
PIN identifies the user to the Galaxy Alarm panel and allows operation of the system.
Galaxy 8/18/60/128/500/504/512 User Guide
3
SETTING THE SYSTEM
SET A12345678
Groups RRR-----
SET A12345678
Groups SRR-----
TIMED SET 120
Code + A
1
ent
SET A12345678
Groups RSS-----
SET B12345678
Groups RSS-----
TIMED SET 60
Code + A
A Key
ent
BEFORE SETTING
Before setting the system ensure all doors and windows are secured
and areas protected by movement detectors are free from obstruction.
ENTERING A PIN - USER LEVEL 1-2
As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered, press the ent or A > key to start the
setting routine.
ENTERING A PIN - USER LEVEL 3 - 6
As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered press the A > key to start the setting
routine.
SETTING GROUPS
Where group choice has been assigned to the PIN, select which groups
have to set as part of the setting routine. The set status of each group is
displayed on the keypad screen. Possible status options are :-
R = Ready (Groups is unset, and all zones are closed)
F = Faulted (Group is unset, and at least one zone is open)
S = Set (Group is set)
L = Lockout (Group is locked out, and cannot be unset)
Select which groups have to be to set by entering the number of the
group. For example, to set groups 2 and 3 press keys 2 and 3 . The
display changes to indicate the groups selected for setting. Pressing
the ent key starts the setting routine for the specified groups.
The Galaxy 500 has 16 groups whilst the 504 and 512 have 32
groups. If the user has group choice, the available groups will be
displayed at the keypad following a valid code + A >. The groups
will be displayed showing A1 to A8. Use both A > and < B keys to
scroll to the various sets of groups. If the user does not have group
choice, entering the PIN and A > will cause all groups assigned to
the user to set.
EXIT TIME
If all the system zones are closed when the setting routine is started,
the display indicates the remaining time, in seconds, to vacate the
premises. Exit the building using the agreed route.
TIMED SET 120
Code + ent or A>
User Guide Galaxy 8/18/60/128/500/504/512
4
SOUNDER
During the setting period the sounder emits a continuous tone if all of
the zones are closed. If a zone is opened during the setting period, the
sounder begins to pulse. The sounder also pulses during the last 25%
of the setting time to indicate time running short.
ZONES OPEN
The exit time will reset should any zones be open or opened during
setting. The display will indicate the number of zones open and invite
viewing. Closing the zones will restart the exit time. An alarm will be
generated on Galaxy 60, 128, 500, 504, 512, if setting is not completed
before the Fail to Set period expires. (Fail to Set; programmed by
engineer).
Note: Before closing the open zone, press esc to abort the setting
routine. The ESC TO ABORT message will flash as a
reminder.
FINAL DOOR/TERMINATOR
The setting procedure can be manually completed by either closing the
FINAL door or by pressing the TERMINATOR button.
SYSTEM SET
When time has expired or a manual termination is made, the system
waits four seconds before setting. The sounders emit two long tones to
confirm that the system is set. The keypad briefly displays the message
SYSTEM SET, before becoming blank.
PART SETTING
To Part Set the system press the < B key after the PIN. Only the zones
which have the PART attribute enabled are set. All other setting features
are the same.
CANCELLING THE SETTING
The setting routine can be aborted by pressing the esc key before the
system sets.
GROUP NAME
Press * and # keys simultaneously when groups are displayed on the
keypad (when setting for example), will display the name of the
group . The group name should be programmed by the installation
engineer. Press the * and # keys to return to the group display.
3 zones open
[<] [>] to view
PART SET 120
PIN+B
SET A12345678
Groups RRRRRRRR
A1 OFFICE AREA R
[<] [>] #=CHANGE
*
+#
Galaxy 8/18/60/128/500/504/512 User Guide
5
UNSETTING THE SYSTEM
NORMAL ENTRY
Unsetting starts immediately when the FINAL door is opened or an
ENTRY zone is activated. The sounder pulses slowly and the user must
go directly to the keypad and enter a valid PIN, followed by A>, <B or
ent. Users with group choice, will access the UNSET screen following
PIN entry. This permits the user to unset specific groups. To return to
the SET screen press ent.
STRAYING FROM THE ENTRY ROUTE
Go directly to the keypad when entering the building. If the user strays
into a protected area and activates a zone, a full alarm will occur. The
police may be called out and the system will have to be reset.
SLOW ENTRY
Enter a valid PIN before the entry time expires. If the entry time expires
before a valid PIN is entered, then a full alarm will occur. The sounder
begins to pulse quickly when 75% of the entry time has elapsed
indicating time is running short.
CANCELLING ALARMS
To cancel an alarm, enter a valid PIN followed by ent at the keypad.
The keypad displays details of the zone activated. When more than one
zone is activated, details can be viewed using A > or < B. Press ent to
return to the banner. Certain types of alarms, once cancelled, require a
code with the appropriate reset authorisation to be entered. The system
prompts for a valid reset code by displaying MANAGER RESET
REQUIRED or ENGINEER RESET REQUIRED on the keypad.
MANAGER RESET
Entering a manager level PIN followed by ent, resets the system
following an alarm activation.
ENGINEER RESET
Certain types of alarm require an engineer to visit the site and, after
investigation, reset the system. In such cases, the system cannot be reset
until the engineer reset has been carried out.
4 ALARMS
[<] [>] to View
PIN + ent
CALL MANAGER
RESET REQUIRED
CALL ENGINEER
RESET REQUIRED
Galaxy 512 V2.00
15.49 MON 18 Nov
PIN + ent
Loading...