Honeywell AV DATASHEET

20 I Solenoid valves

as anti-siphon valve according to DIN EN264

This range of high-quality solenoid valves is not
dependent on a specific minimum differential
pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure,
right through to maximum pressure. They are
therefore the valves of choice for installation in
plants where differential pressures fluctuate

greatly and are not possible to determine
precisely in advance. Solenoid valves of the AV
series are approved as safety shut-off devices

according to DIN EN 264 (Registration
No. 5S235/2000) and are particularly suitable

for use as anti-siphon valves in supply
installations for light fuel oil EL.

Dimensioned drawings

AV series

DN 10–40

Degree of protection:
IP 65

s

DN Pressure range kvsvalue Connection Weight Type
(mm) (bar) (m

3

/h) thread (kg)

10 -0.9 – 4 1.8 G 3/8“ 0.4 AV102MS2
13 -0.9 – 4 3.5 G 1/2“ 0.55 AV131MS2
20 -0.9 – 10 8.6 G 3/4“ 1.0 AV201MS2
25 -0.9 – 10 11.0 G 1“ 1.7 AV251MS2
25 -0.9 – 10 11.0 G 1 1/4“ 1.7 AV252MS2
40 -0.9 – 10 30.0 G 1 1/2“ 3.5 AV401MS2
40 -0.9 – 10 30.0 G 2“ 3.5 AV402MS2

DN A B C D E F G K L M SW

10 72 86 38 38 20 12 G 3/8“ 65 50 3.5 27
13 83 99 45 51 24 14 G 1/2“ 65 58 3.5 32
20 99 119 66 66 35 16 G 3/4“ 65 80 3.5 41
25 145 166 105 105 69 18 G 1“ 69 95 7 41
25 145 166 105 105 69 18 G 1 1/4“ 69 95 7 50
40 157 187 105 105 69 22 G 1 1/2“ 69 132 7 60
40 157 187 105 105 69 22 G 2“ 69 132 7 70

Technical data
Type 2/2-way
Operating mode normally closed
Type of construction Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40)

No back-pressure may occur as the valve will open in an
uncontrolled manner.

Materials Casing: brass, internal parts: stainless steel
Sealing material FPM (Viton)
Mounting position Any, solenoid system preferably upright
Temperature of medium 0°C to +90°C
Max. ambient temperature 55°C
Duty cycle 100% ED
Electrical connection Device socket to DIN 43 650
Voltage / current type Standard version 230 V, 50 Hz
Special voltages available Voltage Code

110 VAC 2
24 VAC 8
24 VDC 6

Degree of protection IP 65 according to DIN 40 050 with device socket
Power consumption in VA or W Switching Nominal diameter/DN

state 10 13 20 25 40 mm
AC: Start 34 36 38 160 202 VA
AC: Oper. 14 14 14 38 38 VA
DC: Start
+ Operation 10 10 10 – – W

Product Summary

Shown without
plug connector