Homelite HLT1201 User Manual

User manual

1. Purpose

Homelite’s CFL has implemented three phosphors together into one compact
fluorescent. It is a new type of light resource of green environment. The product’s
applications are practical for supermarkets, shopping centers, retail stores, and
gymnasium.

2. Characteristics

Homelite’s CFL provides instant start, long-life and high lumen output. The lamp is
designed to perform up to the industry standards by using less electricity. Lamp
can operate under -18 °C below zero degrees Celsius. From Homelite’s testing
results shows the self ballast lamp only uses 20% of the electricity and it is
compared and equivalent to a regular incandescent bulb.

3. Directions

1) For Safety purposes, the lamp fixture must be powered off before being

installed, changed or being cleaned

2) This self ballast lamp cannot be operated with dimmer device. In order to keep

the lamp’s high performance it should be used in defined voltage.

3) This Lamp can be performed under environmental areas in temperature from

-18° C to 45° C, it cannot be used in enclosed fixture or wet areas.

4) Please check the power, voltage and contacts of the lamp incase the lamp

performs abnormal signs such as the light blinking or the light turns off suddenly

5) Do not hold the tube by the hands while changing or cleaning the lamp. The

proper way is to hold the lamp by the plastic housing.

4． Warnning：

This device complies with Part 18 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.
This product may cause interference to radio equipment and should not be

installed near maritime safety communications equipment or other critical
navigation or communication equipment operating between 0.45–30 MHz. If this
occurs, please change outlet or move the lamp far away from other appliance.

Homelite limited

No.319 Jiugan Rd , Sijing Town ,Songjiang District , Shanghai , China. 201601