Hobart HRW2S User Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

HRW2S SERIES

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Modular panel construction

■ Cam lock attachment

■ Stainless steel interior and exterior

■ Self-contained refrigeration system for units with

depth of 37.75"

OPTIONS

❑ Refrigeration
❑ R22
❑ R134A
❑ R404

❑ Stainless steel floor

❑ Pass thru

TWO WIDE RETARDER

MODEL CONFIGURATIONS

❑ 37.75" Interior Depth Two Door – (may be

shipped assembled) Three Single End or Four
Single Side Load Racks or Two Double Racks

❑ 77.75" Interior Depth Two Door – Eight Single

End or Eight Single Side Load Racks or Four
Double Racks

❑ 117.75" Interior Depth Two Door – Twelve

Single End or Twelve Single Side Load Racks or
Six Double Racks

Specifications, Details and Dimensions on Inside and Back.

ACCESSORIES

❑ Side trim
❑ One side
❑ Both sides

❑ Interior light

❑ Rear trim

HRW2S SERIES TWO WIDE RETARDER

F-40145 – HRW2S Series Two Wide Retarder Page 1 of 4

HRW2S SERIES

37.75" Interior Depth
Plan View

37.75" Interior Depth
Side View

77.75" Interior Depth
Plan View

77.75" Interior Depth
Side View

TWO WIDE RETARDER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

37.75" Interior Depth
Front View

77.75" Interior Depth
Front View

1 Water Supply 85" AFF 2 Electrical Supply 85" AFF 3 Drain 5" AFF Front or Rear

Page 2 of 4 F-40145 – HRW2S Series Two Wide Retarder

HRW2S SERIES

117.75" Interior Depth
Plan View

117.75" Interior Depth
Side View

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

117.75" Interior Depth
Front View

TWO WIDE RETARDER

1 Water Supply 85" AFF 2 Electrical Supply 85" AFF 3 Drain 5" AFF Front or Rear

F-40145 – HRW2S Series Two Wide Retarder Page 3 of 4

Printed On Recycled Paper

HRW2S SERIES
TWO WIDE RETARDER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

SPECIFICATIONS

GENERAL:

37.75" Interior Depth Two Door – (may be shipped

assembled) Three Single End or Four Single Side Load
Racks or Two Double Racks

77.75" Interior Depth Two Door – Eight Single End or
Eight Single Side Load Racks or Four Double Racks

117.75" Interior Depth Two Door – Twelve Single End
or Twelve Single Side Load Racks or Six Double Racks

CONSTRUCTION: Stainless steel interior and exterior
is standard. The interior perimeter is supplied with
bumpers on all sides to protect the finish.

CAPACITY: Door opening will accommodate 74" high
racks.

INSULATION: The retarder cabinet is rigid and formed
of stainless steel panels with polyurethane foam
insulation and sealed with gaskets to form a strong,
energy efficient, tight and sanitary enclosure.

HARDWARE AND FITTINGS: Heavy-duty, plastic­coated door handles positioned horizontally. Positive
action door closure.

FREIGHT CLASS: 85

For proper installation, floor should be level within

1

⁄8" per foot not to exceed 3⁄4".

DETAILS AND DIMENSIONS

NOTE: The 37.75" interior depth unit has self contained refrigeration system with a single evaporator. The 77.75" and

117.75" interior depth units have 2 evaporators and require remote refrigeration to be charged on-site. The recom­mended water hardness range is 2-4 grains per gallon. The recommended pH range is 7.0 to 8.0. The acceptable range
for chloride concentration is 0-30 ppm. Consult your local water company and/or water conditioner dealer before using
water on this equipment.

PHYSICAL DATA 37.75" INTERIOR DEPTH 77.75" INTERIOR DEPTH 117.75" INTERIOR DEPTH

Interior Dimensions 74.5" H x 37.75" D x 66" W 74.5" H x 77.75" D x 66" W 74.5" H x 117.75" D x 66" W

Rack Capacity

Net Door Opening Height 74.5" STD 74.5" STD 74.5" STD

Net Door Opening Width 64.5" 64.5" 64.5"

Number of Doors 2 2 2

Exterior Dimensions 99.5" H x 40.5" D x 75.5" W 99.5" H x 80.5" D x 75.5" W 99.5" H x 120.5" D x 75.5" W

Power Input (w/neutral)
without compressor *see
note 1

Power Input (w/neutral)
with compressor *see
note 1

Drain ½" FNPT To Air Gap ½" FNPT To Air Gap ½" FNPT To Air Gap

Refrigeration Supplied
(Std)**

Remote (Optional)

* Neutral wire circuitry needed to provide 110-120V for miscellaneous control components. A separate line may be run or a

transformer option will be required if 110-120V is not available. Consult factory for 110-120V requirements. Consult factory
for 50 Hz requirements. Electrical for remote refrigeration to be supplied by other.

** Refrigeration requirements are based on a minimum of 2 hours to attain retarding temperatures from proofing temperatures.

Consult factory for additional refrigeration requirements if faster times are needed.

3 single end or 4 single side

or 2 double side load

120V/50-60Hz/1 2.5A 120V/50-60Hz/1 2.5A 120V/50-60Hz/1 2.5A

208-240V/60Hz/1 12A N/A N/A

6500 BTU Condenser N/A N/A

One Evaporator Supplied

Minimum 6500 BTU Required

8 single end or 8 single side

or 4 double side load

Two Evaporator Supplied

Minimum 10000 BTU Required

12 single end or 12 single side

or 6 double side load

Two Evaporator Supplied

Minimum 10000 BTU Required

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

Page 4 of 4 F-40145 – HRW2S Series Two Wide Retarder

F-40145 (05/07) LITHO IN U.S.A. (H-01)