Hobart HRPW1S User Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

HRPW1S SERIES SINGLE WIDE

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Eye-level digital control panel mounted for easy
access

- Set proong temp/humidity

- Set retarding temperature

- Four individual rack timers

■ Programmable 24-hour timer for one or seven
day cycle

■ Easy access proong system

- Internally mounted

- Energy efcient

- No ushing required

■ Patented air ow system

■ Congured for remote R22 refrigeration

■ Modular panel construction

■ Cam lock attachment

■ Stainless steel interior and exterior

■ No ramp required

RETARDER PROOFER

MODEL CONFIGURATIONS

❑ 40.5" Deep Cabinet One Door – (may be

shipped assembled) One Single End or Two
Single Side Load Rack or One Double Rack

❑ 60.5" Deep Cabinet One Door – Two Single End

or Three Single Side Load Racks or One Double
Rack

❑ 80.5" Deep Cabinet One Door – Three Single

End or Four Single Side Load Racks or Two
Double Racks

❑ 100.5" Deep Cabinet One Door – Four Single

End or Five Single Side Load Racks or Two
Double Racks

❑ 120.5" Deep Cabinet One Door – Five Single

End or Six Single Side Load Racks or Three
Double Racks

Specications, Details and Dimensions on Inside and Back.

HRPW1S SERIES SINGLE WIDE RETARDER PROOFER

OPTIONS

❑ Self-contained refrigeration system for 40.5" and

60.5" deep cabinets only

❑ Remote refrigeration
❑ R134A
❑ R404

❑ Stainless steel oor

❑ Pass thru

ACCESSORIES

❑ Upper side trim
❑ One side
❑ Both sides

❑ Interior light

F-40147 – HRPW1S Series Single Wide Retarder Proofer Page 1 of 4

HRPW1S SERIES SINGLE WIDE

40.5" Deep Cabinet
Plan View

60.5" Deep Cabinet
Plan View

80.5" Deep Cabinet
Plan View

RETARDER PROOFER

HRPW1S Series

Front View

40.5" Deep Cabinet

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

Side View

60.5" Deep Cabinet
Side View

80.5" Deep Cabinet
Side View

1 Water Supply 85" AFF 2 Electrical Supply 85" AFF 3 Drain 5" AFF Front or Rear

Page 2 of 4 F-40147 – HRPW1S Series Single Wide Retarder Proofer

*Door may be right or left hinged

HRPW1S SERIES SINGLE WIDE

100.5" Deep Cabinet
Plan View

120.5" Deep Cabinet
Plan View

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

100.5" Deep Cabinet
Side View

RETARDER PROOFER

1 Water Supply 85" AFF 2 Electrical Supply 85" AFF 3 Drain 5" AFF Front or Rear

F-40147 – HRPW1S Series Single Wide Retarder Proofer Page 3 of 4

120.5" Deep Cabinet
Side View

*Door may be right or left hinged

HRPW1S SERIES SINGLE WIDE
RETARDER PROOFER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

SPECIFICATIONS

GENERAL:

1. Water – 1⁄2" FNPT. Cold water @ 30-80 psi. Water supply must
have the proper hardness, pH and chloride concentration. The
recommended water hardness range is 2-4 grains per gal­lon. The recommended pH range is 7.0 to 8.0. The acceptable
range for chloride concentration is 0-30 ppm. Consult your local
Hobart service ofce, water company and/or water conditioner
dealer before installation.

2. Power – See chart below for specic power requirements.
Neutral wire circuitry needed to provide 110-120V for control
components. A separate line may be run or a transformer will
be required if 110-120V is not available. Consult factory for
110-120V requirements.

3. Drain – 1⁄2" FNPT. Route to air-gap drain.

CONSTRUCTION: Stainless steel interior and exterior is standard.
The interior perimeter is supplied with bumpers on all sides to
protect the nish.

CONTROLS: Eye-level digital controls for precise heat and humid­ity control. Temperature and humidity can be set independently.
Programmable retarder/proofer controls for one or seven day cycle
on 24-hour timer. Four individual count-down timers for products
with different time requirements.

HUMIDIFIER: Internally mounted, easy servicing. No ush cleaning
required. Low maintenance spray ash system.

INSULATION: The proofer cabinet is rigid and formed of stain­less steel panels with polyurethane foam insulation and sealed
with gaskets to form a strong, energy efcient, tight and sanitary
enclosure.

HARDWARE AND FITTINGS: Heavy-duty, plastic-coated door
handles positioned horizontally.

NOTES:

1. Door opening will accommodate 74" high racks.

2. For proper installation, oor should be level within 1⁄8" per foot
not to exceed 3⁄4".

3. Freight class 85.

DETAILS AND DIMENSIONS

PHYSICAL DATA 40.5" DEEP CABINET 60.5" DEEP CABINET 80.5" DEEP CABINET

Interior Dimensions 74.5" H x 37.75" D x 32.6" W 74.5" H x 57.75" D x 32.6" W 74.5" H x 77.75" D x 32.6" W
Exterior Dimensions 99.5" H x 43.25" D x 42" W 99.5" H x 63.25" D x 42" W 99.5" H x 83.25" D x 42" W

Rack Capacity

1 single end or 2 single side

or 1 double side load

Net Door Opening Height 74.5" STD 74.5" STD 74.5" STD
Net Door Opening Width 31" 31" 31"
Number of Doors 1 1 1

208-240V/60Hz/1

Power Input (w/neutral)

18.4-20.4 A

208-240V/60Hz/3

18.4-20.4 A

Remote (Standard)

Refrigeration Supplied
(Optional)*

One Evaporator Supplied

Minimum 4250 BTU Required

4250 BTU Condenser 4250 BTU Condenser N/A

2 single end or 3 single side

or 1 double side load

208-240V/60Hz/1

18.4-20.4 A

208-240V/60Hz/3

18.4-20.4 A

One Evaporator Supplied

Minimum 4250 BTU Required

3 single end or 4 single side or

2 double side load

208-240V/50-60Hz/1

37.0-42.0 A

208-240V/50-60Hz/3

32.0-37.0 A

Two Evaporator Supplied

Minimum 6000 BTU Required

PHYSICAL DATA 100.5" DEEP CABINET 120.5" DEEP CABINET
Interior Dimensions 74.5" H x 97.75" D x 32.6" W 74.5" H x 117.75" D x 32.6" W
Exterior Dimensions 99.5" H x 103.25" D x 62" W 99.5" H x 123.25" D x 42" W

Rack Capacity

4 single end or 5 single side

or 2 double side load

5 single end or 6 single side

or 3 double side load

Net Door Opening Height 74.5" STD 74.5" STD
Net Door Opening Width 31" 31"
Number of Doors 1 1

208-240V/50-60Hz/1

Power Input (w/neutral)

37.0-42.0 A

208-240V/50-60Hz/3

32.0-37.0 A

Remote (Standard)

Refrigeration Supplied
(Optional)*

*Refrigeration requirements are based on a minimum of 2 hours to attain retarding temperatures from proong temperatures. Consult factory

for additional refrigeration requirements if faster times are needed.

As continued product improvement is a policy of Hobart, specications are subject to change without notice.

Two Evaporator Supplied

Minimum 6000 BTU Required

N/A N/A

208-240V/50-60Hz/1

37.0-42.0 A

208-240V/50-60Hz/3

32.0-37.0 A

Two Evaporator Supplied

Minimum 6000 BTU Required

Page 4 of 4 F-40147 – HRPW1S Series Single Wide Retarder Proofer

F-40147 (REV. 06/08) LITHO IN U.S.A. (H-01)