Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
HO300E MINI ROTATING
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ Rotating interior rack, easily removable for
cleaning
■ Digital control panel includes:
– Four stage baking
– Bake/steam timers
– Cool-down mode
– Auto on/off control
– Auto vent
– 99 menus
■ End-load rack with 4" slide spacing. Holds 8
18" x 26" pans
■ Space saving 48" wide x 37.5" deep footprint
■ UL Listed “0” clearance to combustible
surfaces, sides and rear
■ Self-contained steam system
RACK OVEN - ELECTRIC
MODEL
❑ HO300E – Mini-Rack Oven, Electric
Specifications, Details and Dimensions on Back.
HO300E MINI ROTATING RACK OVEN - ELECTRIC
■ Shipped assembled
OPTIONS AND ACCESSORIES
❑ End-load rack with 5.31" slide spacing. Holds 6
18" x 26" pans.
❑ Side load racks, 6 or 8 pan capacities
❑ Proofer base
❑ 12 or 16 pan stand bases
❑ Vent guard for right side
ANSI/NSF Standard #4
City of LA (M-910049), City of NY (MEA 430-05-E)
and State of MA (C3-0606-363)
Shown with 12-pan stand base
(sold separately)
F-39940 – HO300E Mini Rotating Rack Oven - Electric Page 1 of 2
Printed On Recycled Paper
HO300E MINI ROTATING
RACK OVEN - ELECTRIC
SPECIFICATIONS:
Water – 1⁄2" pipe size. Cold water @ 30-75 psi.
(21kPa-52kPa) minimum @ 1.2 G.P.M. (4.5 liters/min.)
flow rate. Water supply must have the proper hardness,
pH and chloride concentration. Consult your local Hobart
service office, water company and/or water conditioner
dealer before installation.
Recommended water hardness range: 2-4 grains per gallon
Recommended pH range: 7.0 to 8.0
Acceptable range for chloride concentration: 0-30 ppm
Drain – Route
Electrical – 2 supplies required
208V/3 ph/50A 18.0 kW
240V/3 ph/43A 15.1 - 18.0 kW
480V/3 ph/22A 15.1 - 18.0 kW
Contact factory for 50 Hz.
Oven Control – 120V/1 ph/1 amp max. dedicated circuit.
UL listed 8' cord & NEMA 5-15P plug supplied. 4.4 amps.
1
⁄2" rear drain to air-gap drain.
Heating Circuit
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
1
Ventilator Connect Point – 5.0 amps (
Venting – Oven may need to be installed under a Type I or
Type II exhaust hood. Consult local codes.
Clearance – UL certified for zero clearance to combustible
surfaces, sides and back.
Minimum 24" clearance needed for service access. If right
side is within 30" of radiant heat or grease vapor source,
vent guard is required. See options.
NOTES
1. Level floor required. The mini-rack oven is shipped
assembled for easy installation. All components are
factory tested before shipment.
2. The purchaser is responsible for proper installation.
In order to validate the warranty, the start-up must be
performed by an Authorized Servicer.
3. The HO300E will fit through a standard 36" doorway
with doors, control panel and trim package removed.
⁄6 HP @ 120V) max.
DETAILS AND DIMENSIONS
Freight Class: 85
Shipping Weight: 700 lbs.
Note: Heights do not include optional stands or proofer.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 2 of 2 F-39940 – HO300E Mini Rotating Rack Oven - Electric
F-39940 (REV. 01/08) LITHO IN U.S.A. (H-01)