Page 1
Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
HCM450
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ 5 H.P. Motor
■ 45-Quart Capacity Stainless Steel Bowl with
Pouring Lip
■ Durable Steel Base with Epoxy Enamel Finish
■ Electromechanical Safety Interlocks
■ Start/Stop Push Button Switches
■ 5 Minute Timer with “Hold” and “Jog” Settings
■ Counterbalanced Clear Lexan® Polycarbonate
Bowl Cover with Stainless Steel Support Bar
■ Bowl Tilt Lever
■ Stainless Steel Mixing Baffle with Pour-Through
Center Shaft
■ 2 Blade Cut/Mix Knife
■ Knead/Mix Attachment
CUTTER MIXER
MODEL
❑ HCM450 — 45-Quart Cutter Mixer with
Stainless Steel Bowl, Stainless
Steel Mixing Baffle, Cut/Mix
Knife, Knead/Mix Attachment and
6' Power Cable with Plug and
Receptacle
❑ HCM450C — Standard 45-Quart Cutter Mixer
with Maximum Security
Correctional Package
(200/60/3 and 460/60/3 only)
Specifications, Details and Dimensions on Inside and Back.
■ Polypropylene Strainer Basket
■ 6' Power Cable, Plug and Receptacle
ACCESSORIES
❑ Casters
❑ Extra Basket Kit
❑ 4 Blade Knife
R
HCM450 CUTTER MIXER
F-7734 – HCM450 Cutter Mixer Page 1 of 4
Page 2
HCM450
CUTTER MIXER
SOLUTIONS / BENEFITS
5 H.P. Motor
Durability, Reliability, Consistency
■ Heavy-duty to meet the most demanding operations
■ Single-speed, 1140 RPM allows for consistent
processing of various products
Electromechanical Safety Interlocks
Safety, Protection
■ Prevents operation unless bowl cover is closed and
latched
■ Prevents operation if bowl is tilted beyond
20 degrees from vertical position
Start/Stop Push Button Switches
Durability, Reliability
■ Switches are completely sealed and washable
■ All electric controls are housed in a reinforced
polyester, high impact resistance enclosure to
insure long life
5 Minute Timer with “Hold” and “Jog” Settings
Consistency, Flexibility
■ Supports consistent results and thorough processing
■ “Hold and “Jog” settings allow the operator the
flexibility needed for non-timed recipes
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Counterbalanced Clear Lexan
Cover with Stainless Steel Support Bar
Reliability, Ease of Use
■ Clear Lexan
product without a rubber gasket
■ Counterbalanced for ease in handling
■ Stainless steel support bar for long life and durability
Bowl Tilt Lever
Ease of Use
■ Allows bowl to tilt to a 90 degree angle for easy
pouring and removal of product
■ Makes clean-up easy
Stainless Steel Mixing Baffle with Pour-Through
Center Shaft
Consistency, Productivity, Ease of Use
■ Manually operated to move products continually into
the shaft blades for better product consistency
■ Built-in bowl cover scraper allows for easy viewing of
product
■ Pour-through center shaft permits addition of liquid
products with the cover closed
Polypropylene Strainer Basket
Economical, Productivity
■ Allows re-use of water when cutting head lettuce or
other tender vegetables
®
bowl cover effectively seals in liquid
®
Polycarbonate Bowl
Page 2 of 4 F-7734 – HCM450 Cutter Mixer
Page 3
HCM450
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS
MOTOR: Dual voltage configuration with thermal overload
protection, single speed, 1140 RPM, totally enclosed,
externally fan cooled, ball bearings, grease packed and
sealed. Motor shaft is stainless steel.
ELECTRICAL: 200/60/3, 230/60/3 and 460/60/3 –
U L Listed.
CONTROLS: Magnetically operated start and stop
selectors are completely sealed and washable. All
electrical controls are housed in a high impact resistance,
reinforced polyester enclosure.
TIMER: 5 minute, automatically shuts off machine after
time set has elapsed. Non-timed operation obtained by
setting timer on run or jog.
POWER CABLE, PLUG AND RECEPTACLE: 6 foot,
flexible type “SO” cable with grounding polarized plug.
A grounding polarized power receptacle is furnished.
See chart at the bottom of the page for proper size and
voltage.
BRANCH POWER CIRCUIT REQUIREMENTS: 200 or
230/60/3 machine should be connected to a 30 amp
service; 460/60/3 requires 20 amp service.
BOWL: Stainless steel, 45-quart capacity with built-in
pouring lip to guide liquids into a container. Bowl will tilt
90 degrees to a pour height of 15
stainless steel.
BOWL COVER:
effectively without a gasket. Counterbalanced for ease of
handling. Cover support bar is stainless steel.
3
⁄16" clear Lexan® Polycarbonate that seals
3
⁄8" from the floor. All
CUTTER MIXER
BOWL TILT MECHANISM: A lever is provided to control
the bowl for “hold” position when running or “tilt” to empty.
When set to “hold” there is a firm grip to prevent tipping of
the bowl during normal operation. “Tilt” setting releases
the hold but provides a constant preset drag, which allows
pivoting but will hold the bowl in any position. The bowl
and motor are counterbalanced for easy handling.
MIXING BAFFLE: All stainless steel. Manually operated to
move products continually into the shaft blades. Exclusive
pour-through center shaft permits addition of liquid
ingredients with the cover closed, the baffle in position
and the machine operating. Exclusive built-in scraper,
located on the mixing baffle, helps keep the cover clean
during operation, and enables easy cleaning of the cover
before opening. Baffle removable for cleaning.
SAFETY: Electromechanical interlocks prevent operation
unless bowl cover is closed and latched. Interlock also
prevents operation if bowl is tilted beyond 20 degrees from
vertical position. A centrifugal brake stops motor when the
stop switch is pushed or an interlock shuts off electrical
power.
BASE: Rectangular steel tubing, formed and welded.
Finished in gray epoxy-based enamel.
STANDARD EQUIPMENT: Consists of Cutter Mixer unit
with manually operated mixing baffle; polypropylene
strainer basket, cut/mix attachment, knead/mix attachment; 6 foot power cable with plug and power receptacle.
ACCESSORIES: Casters, Extra Basket Kit and 4 Blade
Knife
NET WEIGHT: 282 lbs.
SHIPPING WEIGHT: 362 lbs.
VOLTAGE PLUG & RECEPTACLE OPTIONAL PENDANT
200/60/3 Hubbell 2811/L21-30P
Hubbell 2810/L21-30R Hubbell 2813/L21-30R
230/60/3 Woodhead 28W75 L15-30P
Woodhead 69W75 L15-30R Woodhead 29W75 L15-30R
460/60/3 Woodhead 26W76L16-20P
Woodhead 67W76L16-20R Woodhead 27W76 L16-20R
F-7734 – HCM450 Cutter Mixer Page 3 of 4
Page 4
HCM450
CUTTER MIXER
DETAILS AND DIMENSIONS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
WARNING
ELECTRICAL AND GROUNDING CONNECTIONS
MUST COMPLY WITH THE APPLICABLE PORTIONS
OF THE NATIONAL ELECTRICAL CODE AND/OR
OTHER LOCAL ELECTRICAL CODES.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 4 of 4 F-7734 – HCM450 Cutter Mixer
F-7734 (REV. 9/03) LITHO IN U.S.A. (H-01)
Printed On Recycled Paper
Loading...