Size:
40.24 Kb
Download

Qty.

 

Item No.

701 S Ridge Avenue,Troy, OH 45374

1-888-4HOBART• www.hobartcorp.com

HOBART DISPOSER SELECTOR CHART

FOODWASTE

DISPOSERS

A SIZE TO SOLVE ANY

FOODWASTE PROBLEM…

A disposer installed at each work station, in addition to the soiled dish table unit, provides the maximum of convenience and sanitation. Foodwaste is ground and flushed through the drain lines instead of accumulating… eliminates handling and storage of filled garbage containers.

The Selector Chart is based on disposing of average foodwaste mix. 12 lb. food waste/person/meal should be used as a guide. If the mix will include a large percentage of bones or other hard materials, specify a larger model disposer or additional units.

Refer to Hobart Foodwaste Disposer specification sheets for wide selection of accessories and controls.

Specifications, Details and Dimensions on

Reverse Side.

HOBART DISPOSER SELECTOR CHART

 

 

 

200

300

500

1000

2000

MEALS PER DAY

 

to

to

to

to

to

 

 

 

300

500

1000

2000

4000

 

 

 

 

 

 

 

 

RESTAURANT

 

Soiled Dish Table

FD3-125

FD3-150

FD3-200

FD3-300

FD-500

HOTEL

 

HOSPITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAFETERIA

 

 

 

 

 

 

 

COMMISSARY

 

Soiled Dish Table

FD3-75

FD3-125

FD3-150

FD3-200

FD3-300

SCHOOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POINT OF

 

Veg.–SaladPrep. Area

FD3-75

FD3-125

FD3-125

FD3-150

FD3-200

ORIGIN

 

Scullery Area

FD3-50

FD3-75

FD3-75

FD3-75

FD3-125

 

 

 

 

 

 

 

 

FD3-50

(

12

H.P.)

FD3-75

(

34 H.P.)

FD3-125

(114

H.P.)

Shown with short upper housing.

FD3-150(112 H.P.)FD3-200(2 H.P.)FD3-300(3 H.P.)

FD-500(5 H.P.)

F-7685– Hobart Disposer Selector Chart

Page 1 of 2

HOBART DISPOSER SELECTOR CHART

701 S Ridge Avenue,Troy, OH 45374

1-888-4HOBART• www.hobartcorp.com

HOBART FOODWASTE DISPOSER FEATURE

1.Two hardened stainless steel removable CUTTER BLOCKS can be indexed for new cutting edges or replaced through throat of disposer.

2.BREAKER BLADE speeds grinding, prevents objects from riding at center of flywheel.

3.Ni-ResistFLYWHEEL is precision machined and balanced, has slots which undercut stationary shredder ring teeth to assure that particles are cut to proper size before passing to drain line. STATIONARY SHREDDER RING is castNi-Hard,has a minimum of 4 machine ground primary action breaker bars and a minimum of 40 secondary action grinding teeth.

4.Heavy duty face type WATER SEAL consists of a sintered bronze mating ring and a spring loaded carbon ring insert in a chemical resistant rubber bellows. Mating surfaces are protected by being recessed into the flywheel.

5.Heavy aluminum GRIND and DISCHARGE HOUSINGS reduce operating sound level.

6.Should moisture pass seal, a FLINGER, and weep hole are provided to insure immediate removal. A lip type OIL SEAL (beneath bearings) is an “added protection” water seal.

BEARINGS for upper shaft support are permanently lubricated. Models FD3-50throughFD3-300have ball bearings. ModelFD-500has a matched set of tapered roller bearings.

DUAL DIRECTIONAL GRINDING…automatic reversing of disposer’s direction of rotation when installed with Control Group 2 or 3. Increases life and efficiency of grinding elements by dispersing the wear factor. Will reverse unit, freeing it up in case a jamming situation occurs.

CONES…all models FD3-50throughFD-500fit the same large 7 inch throat opening diameter. Cones of hydraformed stainless steel, 18 inch bowl diameter is standard; 15 inch is optional. Both feature a dual directional water inlet for flushing waste into the disposer.

VINYL ISOLATING RING eliminates metal to metal contact and prevents vibration and noise transmission. Sink and trough mounting accessories are also available.

ADAPTERS are available to install Hobart Disposers on existing Cones (See Form F-7543).

THERE IS NO SUBSTITUTE FOR

SUPERIOR DESIGN, QUALITY

AND RUGGED CONSTRUCTION.

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

R

 

701 RIDGE AVENUE

 

TROY, OHIO 45374-0001

FORM F-7685(REV. 8/03)

LITHO IN U.S.A. (H-01)

 

Printed On Recycled Paper

Page 2 of 2

F-7685– Hobart Disposer Selector Chart