Hitachi C 18DBL User Manual
18V
C18DBL
The Hitachi
Cordless Solution
Specifications
Model Name C 18DBL
Blade Dia 125mm (5”)
Capacity
Max Cutting Depth
Voltage 18V
No Load Speed (When in Silent mode) 5,000/ min(3,000/min)
Overall Length 280mm
Weight* 2.5kg
Standerd Accessories
90° 47mm(1-27/32”)
45° 30mm(1-3/16”)
2 x TCT Blades and wrench. Optional guide,
dust adaptor set, batteries and charger
available separately
*Weight according to EPTA-Procedure 01/2003.
Hitachi Cordless Circular Saw
with Brushless Motor
18V
C18DBL
Get A Set!
All Hitachi cordless sets come standard
with two batteries, charger and a carry
case. This provides you with what you
need to get started.
Compatiblity
IP56 Impact Driver
WH18DDL
Circular Saw
C18DBL
NEW
Available August 2014
Electronic Pulse Driver
WM18DBL
Driver Drill
DS18DBL
Impact Driver Drill
DV18DBL
& POWER UP
FOR TWICE THE TIME
SLIDE ON
Impact Wrench
WR18DBDL
Automatic Screw Driver
WF18DSL
125mm Angle Grinder
G18DSL
82mm Planer
P18DSL
Get Naked!
Naked products come without batteries
and a charger. This offers ultimate
flexibility because you can build your own
tool kit at your own pace by
gradually adding extra “NAKED” tools as
you need them.
Multiple Protection
Circuit (MPC)
Reciprocating Saw
CR18DSL
Jig Saw
CJ18DSL
Fan
UF18DSL
Circular Saw
C18DSL
Radio
UR18DSL2
NEWNEW
NEW
Hitachi Li-ion batteries have a multiple protection circuit fitted that
monitors every cell in the battery.
This protects the battery and tool by providing overload protection
which stops the tool instantly in the event of a jam or overload.
It gives over charge and over discharge protection which ensures
the battery life is extended.
Heat sensor
Air vents for cooling
between cells
Get The Lot!
Combination packs represent significant
value when building your own system. One
of Hitachi’s MEGA PACKS gives you all you
need to get EVERY job done!
200%
Extended
Long Life
& Safety
With Multiple
Multiple Protection
Circuit
Protection Circuit
Impact Driver Drill
DV18DJL
NEW
Available July 2014
Impact Driver
WH18DSDL
Driver Drill
DS18DSDL
Impact Wrench
WR18DSDL
Impact Driver Drill
DV18DSDL
Driver Drill
DS18DJL
NEW
Available July 2014
High Torque Impact Wrench
WR18DSHL
Rotary Hammer
DH18DSL
Angle Drill
DN18DSL
Available August 2014
NEW
200%
EXTENDED
LONG LIFE
& SAFETY
Protection Circuit
Torch
UB18DAL
Hedge Trimmer
CH18DSL
With Multiple
Torch & Worklight
UB18DJL
Available August 2014
Lantern
UB18DSL
Grass Trimmer
CG18DSDL
NEW
Wet and Dry Vacuum
R18DSL
Worklight
UB18DGL
Blower and Vacuum
RB18DSL
Fully compatible with the
entire 18v slide range
NEW
Scan to see
more of the
Hitachi Range
www.hitachi-powertools.com.au
Product information and specications should be conrmed at time of purchase.
Illustrations are for display purposes only.
E&O.E. 8/08/2014
*1 As of February 2014. Among 18V cordless circular saws made by leading power tool manufacturers (surveyed by Hitachi Koki.)
The Overload Protection monitors the fluctuations
in motor rotation speed and, when the motor rotation speed suddenly decreases due
to blade pinching or the like, quickly stops the motor.
RPM
Load
Ideal for applications in noise-sensitive areas,
such as renovation and interior work.
Lower noise plus improved motor efficiency!!
Automatically switches to Power mode
when the motor load increases.
Enables smooth cutting according to cutting conditions.
Automatically
switches
to Power mode
Silent mode
*1
in its Class*1!
C 18DBL
Hitachi
Cordless Circular Saw
with
5.0Ah Lithium-ion Battery
Power mode
CAUTION
Silent
mode
25
Approx.
%
Longer
Advantages
over
Power mode
Material: 45mm × 45mm timber, cedar
Comparison with Power mode
Silent Mode
Overload Protection
Depending on operating conditions, the Overload Protection may not work or may not provide
CORDLESS CIRCULAR SAW” in the instruction manual.
Runtime
per charge
*4
Reduced by approx.
7dB
Noise
level
Industry
First
*1
Industry
First
*1
Most Robust*1, Most Compact*1, Most Lightweight*1 in its Class*1!
Hitachi
Cordless Circular Saw
C 18DBL
with
5.0Ah Lithium-ion Battery
Best in class
Longer Runtime per Charge and Faster Cutting Speed!
Max Power
Output
High efficiency
and extended runtime!
Longer Runtime per Charge
Best
in Class
*1
Material: SPF (2×10), 38mm in thickness × 235mm in width
5.0Ah
C 18DBL
3.0Ah
C 18DBL
Approx. pcs
Approx. pcs
Up toUp to
240
145
Approx.
30%
Higher
550W
1
6
.
5.0Ah
Battery
with
Faster Cutting Speed
Best
in Class
Approx. m/min
*1
Material: SPF (2×10), 38mm in thickness × 235mm in width
5.8
*2
*3*4
X
Industry
*1
Silent Mode
Lower noise plus improved motor efficiency!!
First
Automatically switches to Power mode
when the motor load increases.
Enables smooth cutting according to cutting conditions.
RPM
Power mode
Silent mode
Automatically
switches
to Power mode
Comparison with Power mode
Silent
mode
Material: 45mm × 45mm timber, cedar
Load
Noise
level
Runtime
per charge
Reduced by approx.
7dB
Approx.
*4
25
%
Longer
Ideal for applications in noise-sensitive areas,
such as renovation and interior work.
Overload Protection
The Overload Protection monitors the fluctuations
in motor rotation speed and, when the motor rotation speed suddenly decreases due
to blade pinching or the like, quickly stops the motor.
Depending on operating conditions, the Overload Protection may not work or may not provide
CAUTION
CORDLESS CIRCULAR SAW” in the instruction manual.
Industry
First
*1
Advantages
over
Power mode
*1
Most Compact and
*1
Most Lightweight
Lightweight and compact!
Well-balanced design!
Offers superior maneuverability with its compact body
and short distance between the handle and center of gravity!
Significantly reduces operator fatigue and improves work efficiency!
in its Class!
Overall
width:
168
mm
Overall length: 280mm
Center
of
gravity
Easy to replace saw blade!
Soft material
Lightweight
2.5
kg
Offers well-balanced design and
most compact body in its class
thanks to its brushless motor and
the optimum configuration of
controller and battery.
Leveling
of
motor
position!
Designed with soft material on the housing of
motor and battery mount, the tool remains
stable when placed on its side, improving
work efficiency, such as replacement of saw
blade. The design also effectively prevents
the work piece being scratched.
Hitachi’s advanced
Hitachi’s advanced
new features
new features
Cutting depth adjustment system
Cutting depth adjustment system
Simple tool-less fine tuning for accurate
Simple tool-less fine tuning for accurate
depth setting and accurate angle cutting
depth setting and accurate angle cutting
Parallelism adjustment
Parallelism adjustment
Enables user to easily ensure blade is
Enables user to easily ensure blade is
set accurately
set accurately
Electric brake
Electric brake
Rapidly stops blade from rotating,
Rapidly stops blade from rotating,
increasing user safety
increasing user safety
Max cutting depth:
Max cutting depth:
Ensures this model can perform the majority of
Ensures this model can perform the majority of
work required with a circular saw
work required with a circular saw
*1 As of February 2014. Among 18V cordless circular saws made by leading power tool manufacturers (surveyed by Hitachi Koki.)
*1 As of February 2014. Among 18V cordless circular saws made by leading power tool manufacturers (surveyed by Hitachi Koki.)
*2 In comparison with the conventional model C18DSL with BSL 1830 (3.0Ah).
*2 In comparison with the conventional model C18DSL with BSL 1830 (3.0Ah).
*3 In comparison with the conventional model C18DBL with BSL 1830 (3.0Ah).
*3 In comparison with the conventional model C18DBL with BSL 1830 (3.0Ah).
*4 The values in the chart are for purpose of reference. They may vary according to the material to be cut and operating conditions.
*4 The values in the chart are for purpose of reference. They may vary according to the material to be cut and operating conditions.
system
system
47
47
mm
mm
Electronic trigger switch
Electronic trigger switch
Long lifetime due to less current
Long lifetime due to less current
load through it.Improved handling
load through it.Improved handling
with less pulling force.
with less pulling force.
Blower function
Blower function
Assists users sight of cutting line
Assists users sight of cutting line
l Soft start
Increases safety and control by reducing kickback on start up
l Soft start
Increases safety and control by reducing kickback on start up
lBuilt-in high-intensity LED light
Light switch is integrated into the ambidextrous
lBuilt-in high-intensity LED light
safety switch lever for increased visibility and safety
Light switch is integrated into the ambidextrous
safety switch lever for increased visibility and safety
l Backward saw dust exhaust
l Backward saw dust exhaust
(can be connected
Can be connected to a dust extractor with optional dust
(can be connected
adaptor set 329063
Can be connected to a dust extractor with optional dust
adaptor set 329063
l
Remaining battery indicator
Allows the user to read the amount of charge within the battery
l
Remaining battery indicator
Allows the user to read the amount of charge within the battery
to a dust extractor)
to a dust extractor)
Loading...