Hitachi AX-67 User Manual

model

AUX

TUNER

MULTI FUNCTION DISPLAY

STOP/ BAND

SKIP/ TUN.

PLAY/ PAUSE

SKIP/ TUN.

- VOLUME +

MEMO/ C.ADJ

MODE/ REMAIN

ST MONO

TIMER/ SLEEP

PHONES

STAND

AX-67

STEREO MICRO SYSTEM

AUX

TUNER

MULTI FUNCTION DISPLAY

STOP/ BAND

SKIP/ TUN.

PLAY/ PAUSE

SKIP/ TUN.

- VOLUME +

MEMO/ C.ADJ

MODE/

REMAIN

ST MONO

TIMER/ SLEEP

PHONES

STAND BY

Maintenance and specifications

• DO read the operating instructions before you attempt

to use the equipment.

• DO ensure that all electrical connections (including the

mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturers instructions.

• DO consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

• DO route the mains lead so that it is not likely to be

walked on, crushed, chafed, or subjected to excessive wear and tear or heat.

• DON’T remove any fixed covers as this may expose

dangerous voltages.

• DON’T obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

• DON’T allow electrical equipment to be exposed to

dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment.

• DON’T place hot objects or naked flame sources such as

lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

• DON’T continue to operate the equipment if you are in

any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

• DON’T use equipment such as personal stereos or

radios so that you are distracted from the requirements of traffic safety.

• DON’T listen to headphones at high volume, as such use

can permanently damage your hearing.

• NEVER let anyone especially children push anything into

holes, slots or any other opening in the case - this could result in a fatal electrical shock.

• NEVER guess or take chances with electrical equipment

of any kind - it is better to be safe than sorry!

•

CAUTION - Your CD player & radio incorporates a laser. If you use the controls, make adjustments, alter performance, or use the product differently from the procedures given in these instructions you may be exposed to hazardous radiation. Do not open any covers and do not repair yourself. Repair work must be carried out by qualified personnel.

AUX

TUNER

MULTI FUNCTION DISPLAY

STOP/ BAND

SKIP/ TUN.

PLAY/ PAUSE

SKIP/ TUN.

- VOLUME +

MEMO/ C.ADJ

MODE/

REMAIN

ST MONO

TIMER/ SLEEP

PHONES

STAND BY

Know your personal CD player

Please read these instructions before using your Hi-fi.

Top view

Information

4 5

MUTE

POWER/STANDBY

REPEAT

RANDOM

X-BASS

/M-UP

OPEN/CLOSE

TUNER

AUX

15 16

MULTI FUNCTION DISPLAY

STOP/

PLAY/

BAND

PAUSE

SKIP/

TUN.

STAND

TUN.

- VOLUME +

MEMO/

MODE/

TIMER/

MONO

C.ADJ

REMAIN

SLEEP

PHONES

17 18

1. Power/Standby button

2. Mute button

3. Repeat/M-up button

4. Random button

5. X-bass button

6. EQ button

7. Open/Close button

8. Aux button

9. Tuner button

10. CD button

11. Stop/Band button

12. Play/Pause button

13. Skip/Tun down button

14. Skip/Tun up button

15. Memo/C.adj button

16. Timer/Sleep button

17. Mode/Remain button

18. FM St/Mono button

19. Volume control

20. Phones socket

AUX

TUNER

MULTI FUNCTION DISPLAY

STOP/ BAND

SKIP/ TUN.

PLAY/ PAUSE

SKIP/ TUN.

- VOLUME +

MEMO/ C.ADJ

MODE/

REMAIN

ST MONO

TIMER/ SLEEP

PHONES

STAND BY

Connection diagram

Your main unit and speakers can be placed on the stands provided (as shown below).

FM aerial - extend the FM aerial until you get a good reception.

Speaker wire - Connect the left speaker cable with the white stripe to the left (L) red socket and the completely black wire to the black socket.

Information

ANT

AUX

SBB OUT

RESET

Speaker wire - Connect the right speaker cable with the white stripe to the right (R) red socket and the completely black wire to the black socket.

Plug - After all connections have been made, plug into a mains outlet.

Turn off all of the unit power sources before you make any connections.

If you wish to have a memory back-up, insert 3 x 1.5V ‘AA’ batteries into the compartment on the base of the main unit as shown on the diagram inside.

+ 8 hidden pages