ep
710
headphones
User Guide
English .........................2
Deutsch .........................5
Français ........................9
Español .......................13
Italiano ........................17
Dutch ..........................21
Korean .........................25
Danish ........................29
Norwegian ..................33
Japanese ......................37
Simplified Chinese ......41
Safet y Instruc tions
Headphone/ea rphone listening at high volume levels may cause per manent damage to your hearing. Always set the volume cont rol to the
lowest level bef ore switching to differen t sources (tuner, CD player, MP3 player, etc.) or before plugging in the headphon es/earphones.
For your safety, do not use headphones/ear phones while driving or cyclin g.
Earphone Remov al
• To avoid discomfor t, use a slow twisting motion to gradually break the seal.
• O pen the jaw slightly to equalize pressure, because suction can occur when the eartip is removed.
Headphone Regula tory Requirements
U.S., Europe (+TUV), UK, Japan, China, Singapore, Taiwan, Mexico, Korea, Australia, New Zealand
Headphone Langu age Requireme nts
English, French, Spanish, German, Korean, Chinese, Japanese, Nor wegian, Dutch, Danish, Italian
Welcome
Thank you for purchasing the Harman Kard on® EP 710 noise-isolation ear phone system. This system has bee n designed to meet Harman
Kardon’s highest audio -perfor mance standards. The Harman Kardo n EP 710 will meet all your listenin g and travel needs, and enable you
to immerse yourself in your favori te music, wherever you are.
Introduc tion
Acoustica lly advanced Harman Kardon 700 Seri es earphones deliver clear, accura te sound from any portable music or DVD player. Their
lightwei ght, in-ear design block s out ambient noise better than many bulky bat tery-powe red sound-cance ling headphones. You can enjoy
the full dynamic range of your favorite musi c and movies without cranking up the volume to unnatural – or even unsafe – listening levels .
Package Conten ts
1. EP 710 Earphones
2. Flange ear tips (one pair)
3. Foam ear tips (one pair)
4. Replacement filter s 1 pair
5. Filter-changing tool
6. Carrying case
2.
3.
1.
4.
6.
5.
2
1.
2.
3.
1500 mm
25 mm
1070 mm 415 mm
3.
1.5m
25 mm
1143 mm 340 mm
Construc tion
1. 3.5mm Stereo input plug
2. Shirt clip
3. Earphone
Dimensiona l Layout
Technical Spec ification
Manufacturer: Harman Consumer Group, Inc.
Model: EP 710
Available in: Black or White
Input Requirement: Main connection – 3.5mm mini stereo jack
Max Power Input: 40 mW
Dimensions: Cable length – 1.5m
Compatibility: All audio output devices with a 3.5mm or stereo phono audio jack
Sensitivity (@ 1kHz): 96dB SPL for a 0.1V RMS input
Maximum Output: 120dB SPL
Impedance: 16 ohms (nominal)
Noise Isolation: 30 dB (three-flange ear tip deeply seated)
Frequency Response: 50Hz ~ 15kHz
Weight: 13.2 Grams (1.5m cable included)
3
Proper Care
• D o not expose earphone s to extreme tempe ratures.
• Avo id dropping or strong impact. Extreme shock can damage the earphones.
• A lways leave an ear tip on the earphone for shock protection.
• Pe rspiration entering the nozzle may cause the earphone to temporarily stop
working. Normal operation usually resume s after the earphone dries out.
• D o not pull on the cord to remove it from the jack or the ear.
• Cl ean or replace the ear tips prior to use and following by others.
• Re place disposable foam ear tips regularly.
• Ear wax buildup can reduce the earphone output. When the filters become clogged, they should be replace d. See Changing Filters.
Caution
Consult a physician or audiologist if you have excessive cerumen, difficulty insert ing the ear tips, or discomfort after prolong ed use. It
is unsafe to use insert earphones while driving a motorized vehicle, operating machiner y, bicycling or jogging, because you may not be
alerted to potential danger. Do not use the earphones at excessively loud levels. Noise-induc ed hearing loss is a result of exposure time, the
average sound level and the peak of very loud sounds. Decreased listening levels allow for longer periods of safe listening time.
Changing Filter s
1. Remove eartip.
Filter Replace ment
1. With your fingers, put the narrow end of a new filter into the
end of the earphone. Be careful
to put the open end in first so
that the filter can be seen at
the tip of the earphone. Gently
push on the filter and snap it
into the earphone. You should
feel and hear it snap in place.
2. With a slow twisting motion, firmly
push the sharp tip of the filter tool
into the center of the filter.
2. Add the eartip back onto
the earphone.
4
3. Pull out the entire filter and
plastic ring.
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
1.516.255.4545
www.jbl.com
Made in China. Fabriqué en Chine.
© 2006 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Harman Kardon and Harman International are trademarks of Harman International Industries,
Incorporated, registered in the United States and/or other countries.
Harman Kardon et Harman International sont des marques commerciales de Harman International Industries
Incorporated, déposées aux États-Unis et/ou dans d’autres pays.
Harman Kardon’s model 710 earph ones, are covered by
design patents no. 452313- 0002, and other patent s pending.
Document Number : 950-0171-0 01
Loading...