Harman kardon DVD 37 CONNECTION GUIDE 2

DVD 37 CONNECTION GUIDE 2

Connecting to a Receiver

When using the DVD 37 with an audio/video receiver or processor, connect it as follows.
First, make one of the video connections (Composite Video ç, S-Video ∂,
Component Video é or HDMI ˙) to the video input jacks on the A/V receiver,and then
connect the receiver’s video monitor output to the TV.If you will sometimes use the TV
without the audio component, you may optionally make the Analog Audio Connection ∫
to the TV.In addition, to benefit from the high-resolution surround sound formats recorded
on DVD-Audio discs,which are not output via the HDMI connection, you will need to make
the 6-Channel Audio Connection å to your receiver or processor.

Second, if your receiver or processor is not HDMI-capable, make either the Optical Digital
Audio Connection © or the Coaxial Digital Audio Connection ƒ, to the receiver
or processor.

Remember that when the HDMI connection is used with a receiver or processor that is
compliant with the HDMI format, a single connection suffices for both audio and video,
except for DVD-Audio discs,as noted.

If your receiver or processor is not capable of processing the HDMI audio signal, then a
separate audio connection is required.

If your receiver/

processor has multiroom capability, you may also connect the DVD 37’s

analog audio outputs to the DVD analog audio inputs on the receiver.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 37,

your receiver or processor and your TV or video display, is turned off whenever you make
connections between products.

Front Speakers
(Left/Right)

Center
Speaker

Surround Speakers
(Left/Right)

Subwoofer

Dolby Digital/DTS A/V Receiver or Processor

HDMI, DVI, Component,
S-video and/or
Composite video
monitor outputs

TV

To

HDMI

or DVI

port

To optical

digital

audio

input

connectors

To coaxial
digital
audio
input
connectors

To Y (green)/
Pb (blue)/
Pr (red)
component
video
connectors

To S-video
input
connectors

郩˙∂ç∫å

To video
input
connectors
(yellow)

To analog audio
input connectors
(red/white)
on the TV
or receiver

To 6-channel
analog audio
inputs on
receiver

To power outlet
(AC 120V/60Hz)

(see above)

AC INPUT

120V~, 60Hz

13W