Harman kardon DVD 27 CONNECTION GUIDE

Front speakers
(left/right)

®

Center
speaker

DVD 27 CONNECTION GUIDE

Surround speakers
(left/right)

®

Subwoofer

Component,
S-video and/or
composite video
monitor outputs

To optical
digital
audio input
connector

To analog audio
input connectors
(red/white)
on the TV
or receiver
(see below)

To power outlet
(AC 120V/60Hz)

To coaxial
digital
audio input
connector

To Y (green)/
Pb (blue)/
Pr (red)
component
video
connectors

∂Ƀç∫å

To S-video
input
connector

To video
input
connector
(yellow)

Connecting to a Receiver

When using the DVD 27 with an audio/video receiver or processor, connect it as follows. First, make one of the video connections
(Composite Video ∫, S-Video ç or Component Video ∂) to the video input jacks on the A/V receiver, and then connect the
receiver’s video monitor output to the TV. If you will sometimes use the TV without the audio component, you may optionally make
the Analog Audio Connection å to the TV.

Second, make either the Coaxial Digital Audio Connection é or the Optical Digital Audio Connection ƒ to the receiver
or processor. If your receiver/processor has multiroom capability, you may also connect the DVD 27’s analog audio outputs to the
DVD analog audio inputs on the receiver.

IMPORTANT NOTE: Make certain that any device being connected, including the DVD 27, your receiver or processor and your
TV or video display, is turned off whenever you make connections between products.