21F6B-T
COLOR TV RECEIVER
OWNER'S MANUAL
MAIN FUNCTIONS
Slide Curtain Power On/Off Display
218 Channels Preset
Multiple Picture & Sound Modes
On/Off Timer
Child Lock
Soft Change Channel Function
Count Time
Channels Appointment
DVD Video Component Input Terminals
Please read this manual carefully before operating the unit, and keep it for future reference.
CONTENTS
Before Operation
Warning and Cautions Installation
Antenna connection
Preparation for the remote control
Position of keys and plug-ins
Front panel
Back panel
Using the remote control
Basic Operation
Power on and power off Viewing TV programs
Viewing TV programs
Program scan and screen display
Tuning
Automatic search. . .
Manual search MFT
Skip
Adjusting the picture and the sound
Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... .. . . . . . . . . . . . .
Multiple sound modes S.C.C,count and mute
Setting the Timer Timr off. . .
Sleep timer and timer on Channels appoinment
Setting the other function
Language and screen protection Curtain function and calendar display
Channel exchange
Setting the lock
Changing your password Setting the lock
Game
Game control buttons and method of playing the game
Technical operation
Connecting Additional Equipments
Connecting additional equipment
Others
Troubleshooting
Specifications
Warning and Cautions
1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
2. In order to prolong the using life of the TV set, please place it on a ventilated place.
3. Don't place the TV set in the sunshine or near heat source.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary, it's surface can be cleaned with a dry cotton cloth after cutting off the power. Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.
300 twin-lead cable
Antenna adapter |
Mixer |
|
|
additional |
|
|
purchase |
|
75 coaxial cable |
Antenna input |
|
75 standard |
||
|
||
|
coaxial type |
Plug
(additional purchase)
AC power socket
Note
*It is recommended that you'd better use 75coaxial cable to remove the disturbance caused by airwave.
*Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
!Remove the batteries cover.
!Insert two size AA batteries matching the +/-polarities of the battery to the +/- marks inside the battery compartment.
Tips for remote operation
! The battery life should be about one year
under normal use.
!When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
!Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remote control.
Position of Keys and Plug-ins
Front panel
Headphones Video
socket R/L
Audio
Power switch
Power indicator
Signal receiver
Menu |
TV/AV |
switching |
Volume up/ down Channel position up/down |
|
Back panel
Video CB input terminal |
|
Video Y input terminal |
Antenna input socket |
Video input terminal |
Video CR input terminal |
Audio input terminal |
|
(Not available) |
(Not available) |
Using the Remote Control
Buttons and Descriptions
|
TV/AV |
|
|
DISP |
SYSTEM |
-/-- |
SCAN |
LOCK |
|
|
WATCH |
P.STD |
|
|
S.STD |
|
CH+ |
|
|
VOL- |
MENU |
VOL+ |
|
|
|
CH- |
|
WID |
|
|
HIT |
|
PRE |
BACK |
|
CALENDAR |
MODE |
RESTART |
EXIT |
BAR |
FIRE |
FIRE |
LIGHT |
TV and AV Exchange Button
To exchanger between TV and other available video inputs
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Lock Setting button
Used for setting lock for channelsearching, channel,AV and clock,etc.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu, the volume and the channels, as well as to control the game.
Chromaic Belt Length Adjust Button
(this machine has not this function)
Program Play-forward Button
Calendar
Game Background Select Button
BAR Button(this machine has not this
function)
Fire Button(can call the calendar)
Background Lamp Control Button
(this machine has not this function)
Restart Game Button
Game Exit Button
Program Play-backward Button
Chromatic Belt Width Adjust Button
(this machine has not this function)
Sound Mode Select Button
There are high,normal and low three
kinds of sound modes.
Stopwatch Button
The stopwatch can work 1 hour without interruption and when you use this function,do not operate other
function button as well.
Digit Select Button
Change the channel position number between one digit, two-digits and three -digits.
Program Scan Button
DC Standby Button
Sleep Timer Button
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control.
Power on/off
Menu |
|
|
TV/AV |
Volume |
Channel |
switching |
up/ down |
position up/down |
DC Standby Button |
||
Direct-digit Choosing Button |
Connect/disconnect to the power
1.Connect the power supply wire, then press power switch button, the red power indicator will light, in several seconds the picture will appear on the screen.
2. If the TV is in the state of standby, press the button on the remote control.
NOTE
1.You can also press the 0-9 button to call off the standby
status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can
complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2.When you do not use the remote control, you can directly press the the button on the television to call off the standby status.
3. Press the button on the remote control to get into the standby state.
4. Press the button on the TV set to completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON, and there is no signal , game screen protection works, and ,in15 minutes later, it will change into standby status.
Viewing TV Programs
The channels amount to 218(0-218).
Viewing TV programs
Direct-digit Choosing |
||
|
button |
|
|
Digit Select |
|
|
button |
|
PRE |
BACK |
|
SYSTEM |
|
|
|
CH+ |
|
VOL- |
MENU |
VOL+ |
|
CH- |
|
How to select the TV program
1.Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel.
If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel.
If the channel position number you select is larger than 218, the TV will use the first two number as the channel position.
2.Use CH+/- button
Press CH+ to increase the channel position number. Press CHto decrease the channel position number.
3.Use PRE button and BACK button
Press PRE button, you can go back to the channels you viewed (as many as four).
Then, press Back button, you can return to the channels you were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume. If tne VOL STORE is set ON, the volume of
the pre-fifty channel will be stored independently.
Press VOL+ to increase the volume, press VOLUME VOLto decrease the volume.
If the color or sound of one channel is abnormal
It might be because the color or sound |
|
|
|
system has been set improperly.You may |
|
|
|
follow the instruction below to adjust it. |
|
|
|
Press SYSTEM button, and you can see |
COLOR |
AUTO |
|
the form. |
SOUND BG |
||
select |
adjust |
||
If the color of the picture is abnormal |
|||
to COLOR, |
|||
Press CH+/- button, and move the indicator |
and press VOL+ button to select the proper color(AUTO,PAL, SECAM,NTSC4.43 and NTSC3.58 will appear alternately). Generally, please set to AUTO.
If the sound is abnormal |
|
|
Press CH+/- button, and move the indicator |
|
|
to SOUND, and press VOL+/- button |
COLOR |
AUTO |
to select the proper sound. (BG and DK will |
SOUND BG |
|
appear alternately). |
select |
adjust |
Viewing TV Programs(coutinued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program½ Ú scanÄ ¿and äscreen¯ displayÀ À ¼ ° Æ Á Ä » Ï
SCAN
DISP
Program scanning function
1.If you want to scan the programs
and select your favorite channel , just press the SCAN button, then
the television will start scanning
from the present channel with a rate of two seconds per channel
and until all the preconcerted programs have been displayed
once, the TV set will return to the starting channel.
2.If you want to terminate this function during the scanning, press the SCAN button again, and the
program will stay at the present channel.
Screen display
Usually, when you press the DISP button, the channel number will appear on the top right corner of the screen and press it again, the screen's top left corner will display the present time( the adjustment of time please see Setting the Timer ).If press it for a third time, the channel number and time will both disappear .