COLOUR TELEVISION
ELEGANCE 21 FLAT TVD 55-2503/7 TOP
ENGLISH
POLSKI
HRVATSKI
CONTENTS ____________________________________________
3Set-up and safety
4Connection and preparation
4 |
Connecting the antenna and the power cable |
4 |
Inserting batteries in the remote control |
5-8 |
Overview |
5-7 |
The remote control |
8 |
The front of the television |
9-12 |
Settings |
9 |
Tuning television channels automatically |
9-10 |
Changing stored channels |
11 |
Picture settings |
11-12 |
Audio settings |
13-14 |
Television operation |
15-16 |
Teletext mode |
15 |
FLOF text and normal text mode |
15-16 |
Additional functions |
17-19 |
Convenience functions |
17-18 |
Convenience functions with the »FEATURES« menu |
18-19 |
TV-Guide |
20-28 |
DVD mode |
20 |
Special DVD features |
20 |
Disc formats |
21-23 |
Preparation |
24-25 |
Using a DVD, video CD or audio CD |
26Additional functions during DVD or video CD playback
27Using an MP3 CD or JPEG CD
27Additional JPEG CD playback functions
28Creating and playing a playlist
29-30 |
DVD settings |
29 |
Selecting the setup menu |
29-30 |
Menu options |
31-34 |
Using external devices |
31 |
Decoder or satellite receiver |
31Headphones
32Video recorder or set top box
33Camcorder
34Connecting a multi-channel amplifier or digital two channel audio system
35-37 |
Special settings |
35-37 |
Setting television channels |
38-41 |
Information |
38-41 |
Technical data, service information for dealers, |
|
General instructions for laser devices, troubleshooting, |
|
Additional Information for units sold in the UK |
2
10 |
10 |
cm |
cm |
20 |
20 cm |
cm |
|
|
Golf |
am |
|
eg |
|
Kri |
|
VICE |
! |
! SER |
|
SET-UP AND SAFETY___________________________
Please note the following information when setting up your television set.
This television set is designed to receive and display video and audio signals. Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the open, please ensure that it is protected from moisture, such as rain or splashing water. Do not expose the television set to any moisture.
If the television is subject to sudden changes in temperature, for example if it is brought in from the cold to a warm room, connect it to the mains supply and let it stand for at least two hours before you insert a disc.
Do not place any vessels such as vases on the television, as they may spill liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any objects such as newspapers on the television set or cloth or similar items beneath it.
Do not place the television set close to heating units or in direct sunlight, as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the television set. For reasons of safety, have a specialist remove any dirt deposits in the set from time to time.
Keep the television set away from magnetic fields (loudspeaker boxes, for example).
Do not open the television set under any circumstances. No warranty claims are accepted for damage resulting from improper handling.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the television set is switched off, it can be damaged by a lightning strike to the mains or the antenna cable. Always disconnect the mains and antenna plugs during a storm.
Do not insert foreign objects in the disc compartment.
If the device is unable to scan discs perfectly, use a standard, commercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics.
Always keep the disc compartment closed to prevent dust from collecting on the laser optics.
Clean the screen with a soft, damp cloth. Only use plain water.
ENGLISH
3
CONNECTION AND PREPARATION__
Connecting the antenna and the mains cable
|
AV2 |
|
TV |
R |
|
|
AV1 |
COAXIAL |
1
2
1Plug the antenna cable of the rooftop antenna into the »Ä« antenna socket on the television.
2Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert batteries (micro type, e.g. LR 03 or AAA, 2 x 1.5 V). Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.
4
|
|
|
TV |
|
|
|
DVD |
|
|
|
ZOOM |
|
|
|
PROGRAM |
GO TO |
|
|
DVD MENU |
|
|
|
z |
DVD SETUP |
|
|
TITLE |
TXT |
|
|
AV |
|
|
SUB |
UPDATE |
|
|
|
|
|
|
|
d |
VCR |
|
|
DVD |
SAT |
|
EXT. |
|
|
|
Tele Pilot 165 C
OVERVIEW____________________________________________
The remote control
TV operation
Switches off the television set (stand-by).
TV/DVD Switches the remote control from TV mode to
DVD mode and back.
Reveal answer in teletext mode.
ESwitches between picture formats.
-/-- Switches between singleand double-digit preset channels.
Switches to double character size in teletext mode.
1…0 Switch the television on from standby mode. Select channels directly.
d Sound on/off (mute).
iOpens and closes the info menu; closes all menus.
ZZap function.
Page hold in teletext mode.
P+, P- |
Switch the television on from standby. |
|
Select channels step-by-step. |
|
Move the cursor up and down. |
OK |
Calls up the station list. |
|
Activates various functions. |
Move cursor to the left/right. |
|
TXT |
Switches between teletext and TV modes. |
|
Hides the menu. |
AV |
Selects the AV channels and the most recently viewed |
|
television channel. |
– + Adjust the volume. |
|
SUB |
Selects sub-pages in teletext mode. |
UPDATE |
Updates the page in teletext mode. |
ENGLISH
5
|
|
|
TV |
|
|
|
DVD |
|
|
|
ZOOM |
|
|
|
PROGRAM |
GO TO |
|
|
DVD MENU |
|
|
|
z |
DVD SETUP |
|
|
TITLE |
TXT |
|
|
AV |
|
|
SUB |
UPDATE |
|
|
|
|
|
|
|
d |
VCR |
|
|
DVD |
SAT |
|
EXT. |
|
|
|
Tele Pilot 165 C
OVERVIEW____________________________________________
zSelects various picture settings; scrolls back a page in teletext mode.
Calls up the TV Guide (information about the current and next broadcast) and time.
Moves to the next page in teletext mode.
F
VCR, SAT DVD EXT.
Selects the desired chapter in teletext mode.
Selects various audio settings;
selects the desired topic in teletext mode
Switches to operating a GRUNDIG videorecorder, a GRUNDIG satellite receiver or a GRUNDIG DVD player.
Keep the appropriate button (»VCR«, »SAT«, »DVD EXT.«) pressed down. Then press the appropriate button.
Note:
The functions available depend on the model of the device you are using.
Just try it out.
6
|
|
TV |
|
|
DVD |
|
|
ZOOM |
|
|
PROGRAM |
GO TO |
|
DVD MENU |
|
|
z |
DVD SETUP |
|
TITLE |
TXT |
|
AV |
|
SUB |
UPDATE |
|
|
d
VCR |
|
DVD |
|
SAT |
EXT. |
||
|
Tele Pilot 165 C
OVERVIEW____________________________________________
DVD mode
1…0 Numerical keys for various inputs.
TV/DVD Switches the remote control from TV mode to DVD mode and back.
ZOOM Zooms in/out on scenes during playback.
PROGRAM For programming a playback list for the inserted disc.
GO TO Opens the info menu of DVD unit.
DVD During playback, opens the disc menu* on a DVD.
MENU
P+, P- Select various functions in the menus.
OK |
Confirms functions. |
DVD Opens the main menu on the DVD unit.
SETUP
TITLE Calls up the DVD title menu* during playback.
3Switches to reverse frame search at various speeds during playback.
4Switches to forward frame search at various speeds during playback.
7Interrupts all drive functions.
5a |
Selects the previous title or section during playback. |
8! |
Starts playback. |
|
Freeze-frame for DVDs and video CDs. |
|
Pause for audio CDs and MP3 CDs. |
s6 |
Selects the next title or section during playback. |
|
* Depends on the DVD in use |
ENGLISH
7
OVERVIEW____________________________________________ |
||
The front of the television set |
||
MENU |
PROG/VOL |
TV/DVD |
|
|
MP3 |
|
|
A |
|
|
Switches the television into and out of standby mode. |
MENU |
Opens the TV menu, switches to the previous page in the |
|
TV menu. |
|
Opens the main menu of the DVD unit. |
PROG/VOL |
Preset button for volume or channel selection. |
–Channel selection down. Reduce volume.
+Switches the television on from stand-by. Channel selection up.
Increase volume.
TV/DVD Switches the device from TV mode to DVD mode and back.
7Interrupts all drive functions.
5a |
Selects the previous title or section during playback. |
|
Selects various functions in the menus. |
8/! |
Starts playback. |
|
Freeze-frame for DVDs and video CDs. |
|
Pause for audio CDs and MP3 CDs; |
|
activates menu functions. |
s6 |
Selects the next title or section during playback. |
|
Selects various functions in the menus. |
Opens and closes the disc compartment.
ACompartment for CD media.
Headphone jack (3.5 mm ø jack plug).
S-VIDEO Video signal input for S-video camcorders
VIDEO |
Video signal input for camcorder. |
R AUDIO L |
Audio signal input for camcorder. |
8
SETTINGS ______________________________________________
Setting television channels automatically
Language
English |
|
Svenska |
Romaneste |
Deutsch |
|
Dansk |
Hirvatski |
Français |
|
Norsk |
âe‰tina |
Italiano |
|
Suomi |
Slovenãina |
Español |
|
Slovensko |
Gjuha Shqipe |
Portuguesa |
Polski |
apck |
|
Dutch |
|
Magyar |
Make hck |
Türkçe |
|
Pycck |
Srpski |
Eλληvικα |
|
¹1 |
|
OK |
Select |
|
|
Country Selection
Belgium |
|
Hungary |
Portugal |
Czech Rep. |
Ireland |
Schweiz |
|
Danmark |
|
Italia |
Suomi |
Deutschland |
Netherlands |
Sverige |
|
Eλλaδa |
|
Norge |
Türkiye |
España |
|
Österreich |
U.K. |
France |
|
Polska |
........... |
OK |
Start Autoprogramming |
||
|
●i |
Exit |
|
The television set is equipped with an automatic channel search system.
You start the search and can then sort the television channels into your order of preference.
100 preset positions are provided, to which you can assign television channels from the antenna or from the cable connection.
You can also delete television channels from the channel list which were found more than once or which have poor reception.
1Switch on the television with » « on the television set, then press »P+« on the remote control.
–The »Language« menu appears when the television is first switched on.
Hint:
If the »Language« menu does not appear on the screen, then set it in accordance with the chapter on resetting all television channels on page 36.
2Select language with »P+«, »P-«, » « or » « and press »OK« to confirm.
–The »Country Selection« menu appears.
3Select the country using »P+«, »P-«, » « or » «.
4Press »OK« to start the automatic search.
–The automatic search may last a few minutes, depending on the number of television channels received.
–After performing the search, the menu »Provider Selection« is displayed, (only if a provider was found). Kabel 1 in Germany, for example.) Press »P+« or »P-« to select the TV Guide provider and confirm by pressing »OK«.
MAIN MENU
Sound
Picture
Preset List
Channel Settings
Settings
OK 
Select
●i Exit
Changing stored channels
You can delete channels that have been stored more than once during the automatic search. You can also store channels in a different preset position, change or enter the name of a channel as well as skip channels.
Selecting the station list
1Press »i« to open the »MAIN MENU«.
2Select »Preset List« with »P+« or »P-« and confirm with »OK«
– The »Preset List« menu appears.
Note:
Further operation is explained in the following sections.
ENGLISH
9
Preset List
0 |
5 PRO 7 |
10 VOX |
1 ARD |
6 BR3 |
11 SRTL |
2 RTL |
7 TELE5 |
12 |
3 SAT1 |
8 WDR |
13 |
4 ZDF |
9 KABEL1 |
14 |
OK |
|
● Skip |
|
Select |
● Move |
||
|
●i Exit |
● Delete |
|
|
● Name |
||
Preset List |
|
|
|
0 |
|
5 PRO 7 |
10 VOX |
1 ARD |
|
6 BR3 |
11 SRTL |
2 RTL |
|
7 TELE5 |
12 |
3 SAT1 |
|
8 WDR |
13 |
4 ZDF |
|
9 KABEL1 |
14 |
OK |
|
● Skip |
|
Select |
● Move |
||
|
●i Exit |
● Delete |
|
|
● Name |
||
Preset List
0 |
5 PRO 7 |
10 VOX |
1 ARD |
6 BR3 |
11 SRTL |
2 RTL |
7 TELE5 |
12 |
3 SAT1 |
8 WDR |
13 |
4 ZDF |
9 KABEL1 |
14 |
OK Select |
● Skip |
● Move |
|
●i Exit |
● Delete |
● Name |
Preset List
0 |
5 PRO 7 |
10 VOX |
1 ARD |
6 BR3 |
11 SRTL |
2 RTL |
7 TELE5 |
12 |
3 SAT1 |
8 WDR |
13 |
4 ZDF |
9 KABEL1 |
14 |
OK Select |
● Skip |
● Move |
|
●i Exit |
● Delete |
● Name |
SETTINGS ______________________________________________
Deleting channels
1In the »Preset List« menu, select the station to be deleted by pressing »P+«, »P-«, » « or » «.
2Press » « (yellow) to delete the channel.
Note:
To delete other stations, repeat steps 1 and 2.
Sorting television channels
1In the »Preset List« menu, select the channel to be moved with »P+«, »P-«, » « or » «.
2Highlight the channel with » « (green).
3Select a new channel position by pressing »P+«, »P-«, » « or » « and then press » « to confirm.
– All of the channels that follow move up one position.
Note:
To sort the other television channels repeat steps 1 to 3.
Entering the channel names (maximum of 5 characters)
1In the »Preset List« menu, select the desired channel with »P+«, »P-«, » « or » «.
2Highlight the channel with »F« (blue).
3Select letters or numbers with »P+« or »P-«, move to the next position with » « or » « and repeat.
4Store the channel name with »F« (blue).
Note:
To enter additional channel names, repeat steps 1 to 4.
Skipping television channels
You can mark television channels which should be skipped during selection with »P+« or »P-«. A selection with the number keys is also possible.
1In the »Preset List« menu, select the desired channel with »P+«, »P-«, » « or » «.
2Highlight the channel with »z« (red).
–The television channel is now displayed against a red background.
–You can deselect the selected channel by pressing the red button again.
Concluding the settings
1 Press »i« to finish the settings.
10
Picture
Brightness
Contrast
Colour
Sharpness
Color Temperature Normal
DNR |
Off |
OK |
● Back |
|
●i Exit |
SETTINGS ______________________________________________
Picture settings
1Press »i« to open the »MAIN MENU«.
–The »MAIN MENU« appears.
2Select »Picture« with »P+« or »P-« and confirm with »OK«.
–The »Picture« menu appears.
3Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Color Temperature« with »P+« or »P-« and adjust them with » « or » «.
Note:
The settings are saved as the »User« picture default setting. The »DNR« function improves the picture if the antenna signal is poor.
4Press »i« to finish the settings.
Sound
Volume |
|
|
Balance |
|
|
Sound Type |
Stereo |
|
Sound Mode |
Normal |
|
AVL |
Off |
|
Equalizer
OK 
● Back
●i Exit
Sound
Volume |
|
|
Balance |
|
|
Sound Type |
Stereo |
|
Sound Mode |
Normal |
|
AVL |
Off |
|
Equalizer
OK 
● Back
●i Exit
Audio settings
1Press »i« to open the »MENU«.
–The »MENU« appears.
2Select »Sound« with »P+« or »P-« and confirm with »OK«.
–The »Sound« menu appears.
Note:
Further operation is explained in the following sections.
Volume
The standard volume is set here. This is the volume of the device after switching on.
1Select »Volume« with »P+« or »P-« and adjust the setting with » « or » «.
Balance
1Select »Balance« with »P+« or »P-« and adjust the setting with » « or » «.
ENGLISH
11
SETTINGS ______________________________________________
Stereo / two channel, mono
Sound
Volume |
|
|
Balance |
|
|
Sound Type |
Stereo |
|
Sound Mode |
Normal |
|
AVL |
|
Off |
Equalizer |
|
|
OK |
● Back |
|
|
●i |
Exit |
Sound |
|
|
Volume |
|
|
Balance |
|
|
Sound Type |
Stereo |
|
Sound Mode |
Normal |
|
AVL |
|
Off |
Equalizer |
|
|
OK |
● Back |
|
|
●i |
Exit |
Sound
Volume |
|
|
Balance |
|
|
Sound Type |
Stereo |
|
Sound Mode |
Normal |
|
AVL |
|
Off |
Equalizer |
|
|
OK |
Select |
|
|
● Back |
|
|
●i |
Exit |
Equalizer |
|
|
Music |
|
|
Sports |
|
|
Cinema |
|
|
Speech |
|
|
User |
|
0.10.5 1.5 5 10 |
OK |
● Back |
|
|
●i |
Exit |
If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual II «) and the dubbed version on sound channel A (display: »Dual I«), you can select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception quality is poor.
1Select »Sound type« with »P+« or »P-« and adjust the setting with » « or » «.
Stereo width
Widens the audio output for stereo programmes and improves the sound with mono reception.
1Select »Sound mode« with »P+« or »P-«.
2Press » « or » « to select the setting.
Automatic volume
The television channels broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels.
1Select »AVL« with »P+« or »P-« and then select »On« with » « or » «.
Equalizer
The equalizer offers you four preset sound settings (Music, Sports, Cinema and Speech) and one which you can create yourself (User).
1Select »Equalizer« by pressing »P+« or »P-« and press »OK« to confirm.
–The »Equalizer« menu appears.
2Select the »User« audio setting using »P+« or »P-« and press »OK« to confirm.
–The »0.1 kHz« frequency band is activated.
3Set the value using »P+« or »P-« and select the next frequency band by pressing » « or » «.
4 Press »OK« to save the setting.
Concluding the settings
1 Press »i« to finish the settings.
12
|
|
|
TV |
|
|
|
DVD |
|
|
|
ZOOM |
|
|
|
PROGRAM |
GO TO |
|
|
DVD MENU |
|
|
|
z |
DVD SETUP |
|
|
TITLE |
TXT |
|
|
AV |
|
|
SUB |
UPDATE |
|
|
|
|
|
|
|
d |
VCR |
|
|
DVD |
SAT |
|
EXT. |
|
|
|
Tele Pilot 165 C
TELEVISION OPERATION ___________________
Switching on and off
1Switch on the television by pressing the » « button on the television set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
2Press the » « button to switch the television to standby mode. Press »1…0« or »P+« or »P-« to switch on the device from standby mode.
–After switching on, the station preset of the TV Guide provider is automatically selected. After a short time, the information about the current and upcoming broadcast is displayed.
3Completely switch the television off by pressing » « on the television set.
–This saves electricity.
Selecting channels
1Select channel positions directly with »1...0«. Use »–/– – « to select two digit channel positions.
2Press »P+« or »P-« to move up and down channels.
Selecting AV channels
1 Use »AV« to select AV channels directly.
Adjusting the volume
1 Adjust the volume with »– « or » +«.
Muting
1Use »p« to switch the sound off (mute) and to switch it on again.
Call up TV Guide and time.
After switching the station presets, information about the current broadcast is displayed (TV Guide).
1Call up information about the current and next broadcast by pressing » «.
- The information and the time are briefly displayed.
Note:
If the message »No info« is displayed, switch to the channel preset of the TV Guide provider by pressing »1…0« or »P+« or »P-«. After a few minutes the new data will have been loaded.
Displaying information |
ENGLISH |
|
1 Press »UPDATE« to display the information. |
||
|
– The display disappears automatically after a short while.
13
Loading...