LCD TV
50 VLE 931 BL
EN
Contents-------------------------------------------------------------------------------------------------------------------------------------
4Setup AND SAFETY
6General information
6Special features of your television set 7 Receiving digital channels
7 Grundig SCR system
7 Important notes on environmental protection
7 Notes on still images
8Connection and preparation
8Connecting the antenna and power cord 9 Inserting batteries into the remote control
10 Overview
10Connections on the television set
11Controls on the television set
12The remote control – Main functions
12The GRUNDIG „Voice Remote“
13The remote control – All functions
14Settings
14Initial set-up and tuning television channels
14Selecting language, country and operating mode
15Tuning the television channels from satellite (DVB-S)
17Tuning terrestrial television channels (DVB-T)
17Tuning television channels from the cable provider (DVB-C)
18Changing the program table for the digital channels
21Picture settings
22Sound settings
24Television - OPERATION
24Basic functions
25Zoom function
25Eco mode
26Zapping function
26Electronic TV guide
27Changing the picture format
28NETWORK INSTALLATION
28Network Connection
28Wired network
31Wireless network connection
2 ENGLISH
34 SMART Inter@active TV 2.0 FUNCTION
34 Smart Inter@active TV 2.0 Applikationen
37 GRUNDIG Online Store
40 Plugged into Skype
40 Connecting and settings
42Making a call with Skype
43Skype status
44Skype options
44Updating Skype application
44The application BABYWATCH
45MULTI MEDIA SERVER MODE
45Playing the video, music and image files with home network connection
47USB OPERATION
47File formats
48Connecting external data media
48Removing the external data media
49The file browser
49Settings in the USB setup menu
50Basic playback functions
51Additional playback functions
53Teletext OPERATION
53TOP text or FLOF text mode
53Additional functions
54INTERACTIVE PORTAL (HbBTV)
54What is HbbTV?
54Additional functions for video sequences
55Convenience functions
55Opening the SETTINGS menu
55Language settings
56Setting the date and time
56Timer functions
57Parental control settings
59Updating software (OAD)
59Updating software (Online)
59Restoring the television to the default settings
Contents-------------------------------------------------------------------------------------------------------------------------------------
60 OPERATION USING EXTERNAL DEVICES
60 DIGI LINK
60The DIGI LINK functions on your television
61Device operation
62High definition HD ready
62Connection options
63Connecting external devices
64Using a DVD player, DVD recorder, video recorder or set-top box
64Headphones
65Hi-fi System
67OPERATION AS A PC MONITOR
67Connecting a PC
67Selecting presets for the PC
67Settings for PC mode
68Operation with a Common
Interface
68What is a Common Interface?
68Inserting the CA module
68Access control for CI module and smart card
69Special settings
69Searching for digital television channels from a satellite automatically
70Searching for digital television channels from a satellite manually
70LNB settings
71Settings for motorised antennas
(DiSEqC 1.2)
74Searching for digital terrestrial TV channels automatically
75Searching for digital terrestrial
TV channels manually
75 Tuning analogue television channels
77Changing stored analogue channels
78Displaying signal information
79Deactivate and activate HbbTV
79Deactivate and activate digital teletext
80INFORMATION
80Product Fiche
80Other information
81Service information for dealers
81Environmental note
82Troubleshooting
ENGLISH 3
Setup AND SAFETY-------------------------------------------------------------------------------------------------------
Please note the following instructions when setting up the television set:
7This television is designed to receive and display video and audio signals.
All other uses are expressly prohibited.
7The ideal viewing distance is five times the diagonal screen size.
7Light falling on the screen impairs picture quality .
7To ensure the device is always adequately ventilated, make sure there is sufficient space between the television set and nearby furniture.
7The television is designed for use in dry rooms. If you do use it outdoors, make sure it is protected from moisture such as rain or splashing water.
Never expose the television set to moisture.
7Do not place any vessels such as vases on the television, as they may spill liquid, thus presenting a safety risk.
7 Place the television on a hard, level surface.
7Do not place any objects such as newspapers on the television or put cloth or similar items under it.
7Do not place the television close to heating units or in direct sunlight, as this will impair cooling.
7Heat build-up can be dangerous and shortens the service life of the television. For reasons of safety, have a repairman remove any dirt in the television from time to time.
7Never open the television under any circumstances. Warranty claims are excluded for damage resulting from improper handling.
7Make sure the power cord or the power supply unit (if provided) are not damaged.
7Only operate the television with the power supply/power cord provided.
7Thunderstorms are a danger to all electrical devices. Even when the television is switched off, it can be damaged by a lightning strike to the mains or the antenna. Always disconnect the mains and antenna plugs during a storm.
7Use a damp, soft cloth to clean the screen. Do not use water with soap or detergent.
7Only clean the housing of your television set with the cloth provided. Do not use water with soap or detergent.
7When deciding where to put the device, remember that furniture is often coated with various types of varnish and plastic. Many of these contain chemicals which can corrode the feet of the device, leaving marks on the surface of the furniture which can be difficult or impossible to remove.
7The screen of your LCD/LED television meets the highest quality standards and has been checked for pixel faults.
Despite the great care taken in manufacturing, technological reasons make it impossible to completely discount the possibility that some pixels may be faulty.
Provided they are within the thresholds specified by the DIN norm, pixel faults of this kind cannot be regarded as a defect as defined by the warranty.
7To ensure fires do not occur, always keep candles and other open flames away from the device .
4 ENGLISH
Setup AND SAFETY-------------------------------------------------------------------------------------------------------
7Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it.
7Do not plug in the power cord of the device until you have connected the external equipment and the antenna.
7 Make sure the mains plug is freely accessible.
7Keep the TV away from following devices as much as possible: cell phone, microwave and other devices that uses high frequency radio wave. Otherwise, TV may be malfunction due to radio wave interference.
7Do not expose the batteries to excessive heat such as direct sunlight, fire, etc.
7 Do not use old and unused batteries together.
7Only replace the exhausted batteries with those having the same model, value and properties.
7By ensuring proper disposal of these batteries, you will have contributed in prevention of potential hazards on the environment and human health that may arise from inappropriate disposal of the batteries.
Caution:
7If you plan on using a wall bracket for your television, make sure you read the assembly manual for the wall bracket or have a specialist assemble it.
7When purchasing the wall bracket, make sure that all the fastening points on the television are also on the wall bracket and that they are all used when mounting it.
ENGLISH 5
General information---------------------------------------------------------------------------------
Special features of your television set
7You can receive and watch digital TV channels using your television set (via DVB-S, DVB-T and DVB-C) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.
7Although this television set complies with the current DVB-S, DVB-T and DVB-C standards (status: August 2010), the compatibility with future DVB-S satellite transmissions as well as terrestrial DVB-T and DVB-C cable programmes cannot be guaranteed.
7 Your television set can receive and process all analogue and non-encrypted digital TV channels. The television set is also equipped with digital and analogue receivers.
7The electronic TV guide (for digital channels only) informs you about any schedule changes at short notice, and provides an overview of all the broadcasters' schedules for the next few days. Detailed information on the individual television programmes are – when provided by the broadcasting station – are also available in the electronic TV guide.
7You can connect various data media, such as an external hard drive, a USB memory stick or a digital camera, to the USB socket. Using the file browser, you can then select and play the file formats of your choice (for example, MP4, MP3 or JPEG data).
7Smart Inter@ctive TV feature provides your TV with the Internet services and pages when it is connected to the Internet. You can visit popular video and photo sharing sites as well as social networks.
7DLNA feature allows you to use a wired or wireless local network to access your content that were recorded with DLNA compatible devices we use at our daily lives such as a PC, mobile phone or NAS (Network Attached Storage) which are operated as DMS (Digital Medial Server). Thanks to DMR feature, when DLNA application has been started, you can automatically start and stop media playing on devices with DMC feature.
7Devices that contain and serve video, music or image files are called Server. This television receives video, music and image files from the server through home network, allowing you to access and play such media even when your television is located in a different room then the server. A DLNA compatible device such as a PC, mobile phone, NAS or a NAS-like (Network attached storage) device which operates as a DMS (Digital Media Server) is required in order to use home network.
6 ENGLISH
General information---------------------------------------------------------------------------------
Receiving digital channels
7You require a satellite antenna to receive digital satellite channels (DVB-S).
7You require a digital roof antenna or indoor antenna (passive or active indoor antenna with its own power supply) to receive digital television channels (DVB-T).
7If you wish to receive digital television channels via your cable system (DVB-C), the antenna cable for your cable operator must be connected to the television set.
7Unlike analogue broadcasting, not every channel has its own transmission frequency. Instead, several channels are grouped into what are known as bouquets on a regional or national level. You can find the current transmission information on teletext from various broadcasters, or by consulting a current TV guide or the Internet.
7Various digital television channels from private broadcasters are encrypted (DVB-S, DVB-T and DVB-C). Watching these channels and the recording and playback functions are only possible with the appropriate CI module and a SmartCard. Ask your specialist dealer.
The range of channels available from the public broadcasting institutions (ARD with EinsExtra, EinsFestival or ZDF with ZDF Info and all third party broadcasters) are not encrypted and can be received without a SmartCard.
Grundig SCR system
7Your TV supports SCR system (Satellite Channel Router). If your antenna installation is equipped with an Single Cable Distribution multiswitch, all television sets which are connected on this antenna can receive the television channels stand-alone.
Important notes on environmental protection
7The following information will help you to save resources – and money as well.
7If you are not using your television set for several days, you should pull out the mains plug for environmental and safety reasons. This way the television does not consume any electricity.
7If the device is equipped with a power switch, switching it off using this switch will be sufficient. The energy consumed by the television set is reduced to virtually 0 W.
7In standby mode, the television set uses very little energy. However, it may be necessary to leave the television set in standby mode for certain functions (for example automatic switch-on and switch-off and for timer functions).
7The television set uses less energy when the brightness is reduced.
Notes on still images
Watching the same image for a long time on the screen may cause a still image remains feebly on the background. Feeble image(s) on the background is originated from LCD/LED technology and does not require any action under guarantee. To avoid such cases and/or minimize the impact, you may observe the tips below.
7Do not allow the same TV channel to stay on the screen for a very long time. Channel logos may cause this situation.
7Do not allow the images, which are not full screen, to constantly stay on the screen; if not streamed in full screen format by the broadcaster, you can convert the images to full screen by changing picture formats.
7Higher brightness and/or contrast values will lead this impact to appear faster; therefore, you are recommended to watch your TV in the lowest brightness and contrast levels.
ENGLISH 7
CoNNECtIoNANDprEpArAtIoN-----------------------------------------------
Connectingtheantennaandpowercord
3 |
2 |
|
1 |
1To receive digital satellite channels (DVB-S), connect the satellite antenna cable to the antenna socket »SAtELLItE« on the television set.
And/or:
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the an-
tenna socket »ANtIN« on the television set; or
2b To receive digital cable channels (DVB-C) connect the cable for the rooftop antenna to the antenna socket »ANt IN« on the
television set; or
Note:
7When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.
3 Plug the power cord into a wall socket.
Note:
7Do not plug in the power cord of the device until you have connected the external equipment and the antenna.
7Do not use an adapter plug or extension lead which does not meet the applicable safety standards. Do not tamper with the power cord.
2c To receive analogue TV channels, connect the cable for the rooftop antenna to the antenna socket »ANtIN« on the television set
8 ENGLISH
Connection and preparation------------------------------------------------
Inserting batteries into the remote control
1Open the battery compartment by removing the lid.
2Insert the batteries (2 x 1.5 V micro, for example R03 or AAA). Observe the polarity marked in the bottom of the battery compartment .
3 Close the battery compartment.
Note:
Environmental note
7 |
|
|
|
|
|
|
This symbol on recharge- |
|
|
|
|
|
|
able batteries/batteries or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
on the packaging indicates |
|
|
|
|
|
|
|
that the rechargeable bat- |
|
|
|
|
|
|
|
|
|
tery/battery may not be disposed of with |
||||||
|
regular household rubbish. For certain |
rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol. Symbols for mercury (Hg) or lead (Pb) are provided if the rechargeable batteries/batteries contain more than 0.0005% mercury or more than 0.004% lead.
Rechargeable batteries/batteries, including those which do not contain heavy metal, may not be disposed of with household waste. Always dispose of used batteries in accordance with local environmental regulations. Make enquiries about the applicable disposal regulations where you live.
7If the television no longer reacts properly to remote control commands, the batteries may be flat. Always remove used batteries.
7The manufacturer accepts no liability for damage caused by leaking batteries.
ENGLISH 9
ovErvIEw------------------------------------------------------------------------------------------------------------------------------------
Connectionsonthetelevisionset
|
Av1/S-vHS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
SCART socket (CVBS signal, |
|||||||||
|
|
|
RGB signal); |
|||||||
|
|
|
Video and sound socket for |
|||||||
|
|
|
S-Video camcorder. |
|||||||
|
CompoNENt |
|
|
|
|
|
|
|
|
|
|
Ypbpr |
Sockets for video input |
||||||||
|
|
|
(YUV signal). |
|||||||
|
|
Lr |
Sockets for audio input |
|||||||
|
|
|
(YUV signal). |
|||||||
|
opticout |
Socket for audio output |
||||||||
|
|
|
(optical) for PCM/Dolby |
|||||||
|
|
|
Digital signals. |
|||||||
|
|
|
For connecting digital AV |
|||||||
|
|
|
amplifiers or AV receivers. |
|||||||
|
10 ENGLISH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AuDIooutLr |
Sockets for audio output. |
|||||||||||||||||||||
Audio |
Socket for audio input for a |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC. |
||||||
pC-IN |
VGA socket, video input for |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC. |
||||||
SAtELLItE |
Antenna socket for the |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
satellite antenna (DVB-S). |
||||||
ANtIN |
Antenna socket for a DVB-T, |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVB-C and analogue antenna. |
||||||
HDmI2(ArC) |
HDMI socket, |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
audio/video input. |
||||||
HDmI3 |
HDMI socket, |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
audio/video input. |
Overview-------------------------------------------------------------------------------------------------------------------------------------
HDMI4 |
HDMI socket, |
|
audio/video input. |
USB2 (HDD) |
USB socket for external |
|
data media; |
|
Grundig WiFi USB dongle |
|
port. |
LAN |
Network cable connection |
|
socket. |
UHeadphone jack (3.5 mm jack plug);
Sockets for audio output.
AV2 |
|
Video |
Video socket for |
|
camcorder |
L R |
Audio socket for |
|
camcorder. |
USB1 |
USB socket for external |
|
data media without a power |
|
supply of their own; |
|
Grundig WiFi USB dongle |
|
port. |
HDMI1 |
HDMI socket, |
|
audio/video input. |
CI |
Common Interface Slot. |
Controls on the television set
ON • OFF Power switch, switches the television into standby mode and off.
8/I |
Switches the television on and |
|
|
back into standby mode. |
|
V– V+ |
Adjusts the volume; |
|
|
selects menu functions. |
|
MENU |
Opens the menu. |
|
|
Select a menu option with |
|
|
»P+« or »P–«. |
|
|
Activate the function with |
|
|
»V+«. |
|
|
Confirm the function with |
|
|
»V+« or »V–«. |
|
|
Press »MENU« to quit the menu. |
|
M |
Opens the pre-selection for |
|
|
AV channels. |
|
|
In the menu, press »P+« or »P–« |
|
|
to select and press » |
« to |
|
confirm. |
|
P– P+ |
Switches the television on from |
|
|
standby; |
|
|
selects channels in steps; |
|
|
selects function in the menu. |
ENGLISH 11
ovErvIEw------------------------------------------------------------------------------------------------------------------------------------
theremotecontrol–mainfunctions
Switches on from standby; Selects channel – directly.
Selects the channel list (»All«, »FAV 1« to »FAV 4«).
Switches on and off |
(Standby). |
Switches between |
teletext and TV mode. |
Opens and close the Quick
Displays information. |
Apps menu. |
|
Opens the main menu. Opens the channel list.
Opens the TOOLS menu. Opens/closes the control menu when playing a file in DLNA menu.
Adjusts the volume.
Muting.
Navigationinthemenus
Moves the cursor up and down in the menus.
Moves the cursor to the left and right in the menus.
Activates various functions and save functions/settings.
12 ENGLISH
Zapping function; switches back one menu level in the menus.
Opens the electronic TV guide.
Opens menu for AV channels and USB input.
Then select using »v«, »<«, »>« or »Λ« and press »oK«
to confirm.
Switches on from standby; Selects channel – in steps.
theGruNDIG„voiceremote“
As an alternative to the included remote control, you can also operate your television with the new GRUNDIG „Voice Remote“.
Your television is operated using simple voice commands..
Additional information on the GRUNDIG „Voice Remote“ is available from your retailer.
Overview-------------------------------------------------------------------------------------------------------------------------------------
The remote control –
All functions
(red) |
Selects pages in teletext; |
(green) |
Selects/activates various functions |
(yellow) in the menus.
(blue)
5Switches to double character size in teletext;
Selects the previous title/previous picture in the file browser.
6Refreshes a teletext page; Selects the next track/next picture in the file browser.
3Stops scrolling through pages in teletext;
Starts a fast reverse search in the file browser.
4Reveals answers in teletext; Starts a fast forward search in the file browser.
Key has no function
8Starts playing a programme from an external data medium;
Starts playing in DLNA menu.
!Freeze frame;
Pauses the file being played in DLNA menu.
7Ends playback of a programme from an external data medium; Splits the screen in teletext; Ends playing in DLNA menu.
Selects different audio languages (only for digital television chan-
nels)
Selects different subtitles
(only for digital television channels)
Note:
7Your TV supports remote control feature for Apple iPhones and Android phones. Depending on the features of your TV, you may control your TV by your phone after downloading the free »GRUNDIG TV Remote« application from Apple App Store or Google Play (Android Market) and install it on the Apple iPhone/Android phone.
ENGLISH 13
Settings------------------------------------------------------------------------------------------------------------------------------------------
Initial set-up and tuning television channels
The television set is equipped with automatic channel search, which searches for satellite channels (DVB-S), terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels.
You start the search and the television channels will be stored into the Program Table. Following, you can sort the satellite channels (DVB-S) in the Program Table.
The sorting of terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels is only possible in the favourite list
For DVB-S channels there are 6000 presets available, for DVB-T and DVB-C channels 1000 presets, and 99 presets for analogue channels.
The various settings
Depending on the type of antenna connected, you can decide which channels you would like the television to search for.
7Tunes digital television channels from the satellite, from page 15.
You have two options for this search:
–the basic installation which presets a standard selection, e.g. the satellite Astra 19.2° East; you need only start the search;
–the professional installation, which allows you to make all required settings and set parameters for your receiver system.
7Tunes digital terrestrial television channels, on page 17.
7Tunes digital television channels from the cable provider, on page 17.
7Tunes analogue television channels, in the chapter “Special functions”, starting on page 75.
7Further settings for digital television channels after the initial set-up can also be found in the chapter “Special Settings”, starting on page 69.
Note:
Selecting language, country and operating mode
1Switch on the television set from standby with »8«, »1…0« or »P+« or »P-«.
–During initial set-up, the »Installation Guide« will be displayed.
Help:
7If this menu is not displayed, restore the television set to its default settings (see page 59).
2Select the menu language with »<«, »>«, »V« or »Λ« and press »OK« to confirm.
3Select the mode with »<« or »>« and press »OK« to confirm.
–The settings used in »Home Mode« help to save energy.
–Alternatively, the menu item »Shop Mode« can be selected which the retailer can use for demonstrating the device functions.
Note:
7End the »Shop Mode« by restoring the television set to its default settings (see page 59).
4Select the country in which the television set is operated with »<«, »>«, »V« or »Λ« and press »OK« to confirm.
–The »Source Setup« menu appears with the »Connection Type« line marked.
Note:
7You can find a description of how to tune the television channel of your choice – depending on the antenna connected – in the following chapters.
7Make the language and country selection for all types, then continue reading the respective chapter.
14 ENGLISH
SEttINGS-----------------------------------------------------------------------------------------------------------------------------------------
tuningthetelevisionchannels fromsatellite(DvB-S)
You have two options for tuning digital satellite channels.
A The easy installation,
which pre-configures all antenna settings for the satellite channels on Astra 19.2° East.
B The advanced installation
can be used if you wish to receive satellite channels from various satellites. To do so, you must make the antenna settings (Satellite, LNB Power, LNB Type, DISEqC Mode, LNB Selection) for the satellites chosen.
Easyinstallation
1In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite« with »<« or »>«.
2Select the line »Easy Installation« with »v« or »Λ« and press »oK« to confirm.
–Other menu options will be displayed, the satellite Astra 19.2° East is preset.
3Start the scan with »« (green).
–The »Search results« menu appears, and the scan for TV channels begins.
–Depending on the number of television channels received, this can easily take a few minutes.
–The scan is complete as soon as the »PROGRAM TABLE« appears.
Note:
7You can abort the scan by pressing »mENu«.
Advancedinstallation
1In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite« with »<« or »>«.
2Select the line »Advanced Installation« with »v« or »Λ« and press »oK« to confirm.
– The menu appears.
08.08.2012
INSTALLATION 15:46
ANTENNA SETTINGS
|
Satellite |
ASTRA 19.2°,E |
|
|
Transponder |
11362 MHz H |
|
|
LNB Type |
|
Universal |
|
|||
|
LNB Power |
|
Off |
|
DISEqC Mode |
|
Off |
|
LNB Selection |
|
Off |
|
Poor |
|
Normal Good |
|
Quality |
|
|
|
Signal strength |
|
|
|
Exit |
|
|
|
Back |
|
|
3Select the line »Satellite« with »v« or »Λ« and press »oK« to confirm.
– The »SELECT SATELLITE« menu appears. Select the satellites with »v«, »Λ«, »<« or »>« and press »oK« to confirm.
Note:
7The setting in the line »Transponder« is not required for this automatic scan.
4Select the line »LNB Power« with »v« or »Λ«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V« with »<« or »>«.
5Select the line »LNB Type« with »v« or »Λ«. Select the type of LNB installed with »<« or »>«.
ENGLISH 15
SEttINGS-----------------------------------------------------------------------------------------------------------------------------------------
6 Select the line »DISEqC Mode« with »v« or »Λ«.
Select »DiSEqC 1.0« or »DiSEqC 1.1« in accordance with the existing antenna system with »<« or »>«.
– DiSEqC 1.0 allows up to four satellites to be received simultaneously.
– DiSEqC 1.1 allows up to 16 satellites to be received simultaneously.
7 Select the line »LNB Selection« with »v« or »Λ«.
Select the setting for the respective satellites with »<« or »>«.
8 Once the settings for the satellite have been made, switch to the »AUTOMATIC CHANNEL SEARCH« menu with »« (red).
08.08.2012
SOURCE SETUP 15:46
AUTOMATIC CHANNEL SEARCH
|
Connection Type |
Satellite |
|
Operator Selection |
Other |
|
Select Satellite |
ASTRA 19.2°,E |
|
||
|
Scan Mode |
Free + Scramble |
|
Service Type |
All |
|
Network Search |
Off |
Exit
Back
9 |
Select the line »Scan Mode« |
with |
»v« |
|
or »Λ«. |
|
|
|
Select the scan mode with »<« or »>« |
||
|
(for unencrypted channels, for encrypted |
||
|
channels only, or for both). |
|
|
10 |
Select the line »Service Type« |
with |
»v« |
|
or »Λ«. |
|
|
Use »<« or »>« to select whether you want to search for television channels only (TV), radio stations only (Radio) or both (Radio + TV).
Note:
7It is possible, that some TV channels (transponders) cannot be found. This is caused by a change in satellite parameters made by the broadcaster, e.g. new channels have been added. Set the »Network Search« option to »On«.
11Start the scan with »« (red).
–The »Results« menu appears, and the scan for TV channels begins.
–Depending on the number of television channels received, this can easily take a few minutes.
–The scan is complete as soon as the »PROGRAM TABLE« appears.
Note:
7You can abort the scan by pressing »mENu«.
12 Press »mENu« to end the setting.
Note:
7If other television channels are to be tuned from a second satellite, proceed as follows:
Open the menu with »mENu«, select the line »SOURCE SETUP« with »v« or »Λ« and press »oK« to confirm. Then select the »Automatic Channel Search« with »v« or »Λ« and press »oK« to confirm. Confirm the line »Select Satellite« with »oK« and
select the preferred satellite with »v«, »Λ«, »<« or »>«. Start the scan with »« (red). Continue the adjustment by step 7 of the chapter.
Note:
7Before recording HD channels, please check signal quality and Strength, see chapter "Displaying signal information" on page 78. If the level is displayed in green, you can record HD channels without any problems.
16 ENGLISH
Settings------------------------------------------------------------------------------------------------------------------------------------------
Tuning terrestrial television channels (DVB-T)
1In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Air« with »<« or »>«.
2Select the line »Scan Type« with »V« or
»Λ«.
Use »<« or »>« to set the required scan type:
–»DTV«, scan for digital television channels;
–»ATV«, scan for analogue television channels;
–»ATV & DTV«, scan for analogue and digital television channels.
Caution:
7The antenna power supply (5V ) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably damage your antenna.
3Select the line »Active Antenna Power« with »V« or »Λ«.
Switch on the antenna power supply for the antenna with »<« or »>« (»On«).
4Start the scan with »« (green).
–The »Search Results« menu appears, and the search for TV channels begins.
–Depending on the number of television channels received, this can easily take a few minutes.
–The scan is complete as soon as the »PROGRAM TABLE« appears.
Note:
7You can abort the scan by pressing »MENU«.
5 Press »MENU« to end the setting.
Note:
7Before recording HD channels, please check signal quality and Strength, see chapter "Displaying signal information" on page 78. If the level is displayed in green, you can record HD channels without any problems.
Tuning television channels from the cable provider (DVB-C)
1In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Cable« with »<« or »>«.
2Select the line »Scan Type« with »V« or »Λ«. Use »<« or »>« to set the required scan type:
–»DTV«, scan for digital television channels;
–»ATV«, scan for analogue television channels;
–»ATV & DTV«, scan for analogue and digital television channels.
3Select the line »Cabel Scan Type« with »V«
or »Λ«. Select the preferred option (»Quick« or »Full«) with »<« or »>«.
–The search function »Quick« sets up the channels according to the information provided by your cable provider in the transmission signal.
–If the option »Full« is selected, the entire frequency range will be scanned. The search can take a long time with this option. This option is recommended if your cable provider does not support the scan type »Quick«.
Note:
7You can accelerate the search. To do this, you need information about the frequency and network ID. You are usually able to get this data from your cable operator or find it in forums on the Internet.
4Start the scan with »« (green).
–The »Search Results« menu appears, and the search for TV channels begins.
–Depending on the number of television channels received, this can easily take a few minutes.
–The scan is complete as soon as the »PROGRAM TABLE« appears.
Note:
7You can abort the scan by pressing »MENU«.
5 Press »MENU« to end the setting.
Note:
7Before recording HD channels, please check signal quality and Strength, see chapter "Displaying signal information" on page 1
. If the level is displayed in green, you can record HD channels without any problems.
ENGLISH 17
SEttINGS-----------------------------------------------------------------------------------------------------------------------------------------
Changingtheprogramtablefor
thedigitalchannels
Channels which are found using the scan are saved in the »PROGRAM TABLE«.
You can delete channels which are not required from the programe table, you can change the order of channels within the programe table (only satelite channels, DVB-S) and lock individual channels (Parental control).
You can also add channels to the favourites list; in addition, you can change the order of channels within the favourites list.
With »« (green) you can display the channels which belong to one network.
Switch to the next page in the programe table with »p+« and to the previous page with »p-«.
With »« (yellow) you can open the »LIST MANAGEMENT« within the programe table.
In this List Management you can create your own favourites lists.
With »« (blue) you can sort the channels according different criteria.
Selectingchannellists
1 Open the menu with »mENu«.
2Select the »SOURCE SETUP« menu with »v« or »Λ« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3Select the line »Programe Table« with »v« or »Λ« and press »oK« to confirm.
– The menu »PROGRAM TABLE« appears.
Important:
7Programe table and favourites lists are saved separately according to the different input sources (satellite, cable, air).
7When opening the program table, the respective channel list for the current input signal appears.
Notes:
7If in the program table appears added to the name of the channel, you need a CI module and a Smart-Card for watching these channels.
7As the received data channels are not displayed in the program table, number channels displayed in the program table may be less than 6000.
|
INSTALLATION |
|
|
|
PROGRAM TABLE |
Network ALL |
|
|
|
|
|
|
|
|
DTV HD MPEG |
|
|
|
ASTRA 19.2° |
|
Service |
ALL |
|
|
|
|
|
|
2 ZDF HD |
3 arte HD |
4 N24 |
5 Einsfestival |
||||||||
|
|
|
|
|
DTV |
DTV |
DTV |
DTV |
||||||||
|
|
|
6 EinsPlus |
7 arte |
8 Phoenix |
9 Test-R |
10 ANIXE HD |
|||||||||
|
|
|
||||||||||||||
|
|
DTV |
DTV |
DTV |
DTV |
DTV |
||||||||||
|
|
|
11 HD 1 |
12 Life |
13 Film |
14 Promo |
15 Sport1 |
|||||||||
|
|
|
||||||||||||||
|
|
|
DTV |
DTV |
DTV |
DTV |
DTV |
|||||||||
|
|
|
16 TV Sport |
17 Sat.8 |
18 SKY |
19 TV6 |
20 TV5 |
|||||||||
|
|
|
DTV |
DTV |
DTV |
DTV |
DTV |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Exit |
|
Select Favorite |
|
|
||||||||
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
||||||||||
|
|
|
|
Back |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18 ENGLISH
Settings------------------------------------------------------------------------------------------------------------------------------------------
Deleting channels
1In the »PROGRAM TABLE« menu, select the Edit mode by pressing »« (red).
2 Select the television channel to be deleted
with »V«, »Λ«, »<« or »>« and press »« (yellow) to delete.
Note:
7You can delete all channels with »« (blue).
3Confirm the deletion process with »« (green);
or
cancel the deletion process with »« (red);
4 Quit the program table with »MENU«.
Change the order of the channels in the program table
(only satellite channels)
1In the »PROGRAM TABLE« menu, select the Edit mode by pressing »« (red).
2Select the channel which should be moved with »V«, »Λ«, »<« or »>« and mark it with »« (red).
3Move the channel to its new position with »V«, »Λ«, »<« or »>« and press »OK« to confirm .
Note:
7Repeat steps 2 and 3 if you would like to change other channels.
4 Quit the program table with »MENU«.
Sorting channels in the program table
(only satellite channels)
You can sort the order of the channels in the program table according different criteria: in order of Satellite, alphabetical or in order of encryptied/free channels.
1In the »PROGRAM TABLE« menu, select the Sort mode by pressing »« (blue).
2Select the sort criteria with »« (red), »« (green) or »« (yellow).
3 Quit the program table with »MENU«.
Skipping channels
You can mark television channels which should be skipped when selecting with »Λ« or »V«. It is still possible to select them using the number buttons.
1In the »PROGRAM TABLE« menu, switch over to the list view with »« (yellow).
2 Select the preferred channel with »V« or »Λ«.
3Select the column »Skip« with »<« or »>« and use »OK« to mark the channel.
– The channel is marked by » «.
4 Quit the program table with »MENU«.
Note:
7Channels can also be reactivated. Select the channel with »V« or »Λ«, then select the column »Skip« and reactivate the channel with »OK«.
Creating lists of favourites
You can save your favourite channels in up to four favourites lists (FAV 1 to FAV 4).
Notes:
7Favourites lists must be created separately for all input sources (satellite, cable, air).
7You can select the favourites list by pressing »FAV«.
1 In the »PROGRAM TABLE« menu, switch over to the list view with »« (yellow).
2Select the channel of your choice with »V« or »Λ«.
3 “Push” the channel into the favourites lists 1 to 4 with »<« or »>« and press »OK« to confirm.
–The position in the favourites list is marked with » «.
–You can enter the same channel in more than one favourite list.
–Each favourite list can store up to 250 channels.
ENGLISH 19
Settings------------------------------------------------------------------------------------------------------------------------------------------
Notes:
7Channels can also be deleted from the
favourites lists. Select the channel to be deleted with »V«, »Λ«, »<« or »>« and press »OK« to delete it.
7When deleting a channel from the favourites list, the order within the favourites list will be updated.
4 Quit the program table with »MENU«.
Sorting channels in the favourite list
You can change the order of channels in the favourites list.
1In the »PROGRAM TABLE« menu, select the favourites list »1« to »4«.
2Select the channel which should be moved with »V«, »Λ«, »<« or »>« and mark it with »« (red).
3Move the channel to its new position with »V«, »Λ«, »<« or »>« and press »OK« to confirm .
Notes:
7Repeat steps 2 and 3 if you would like to change other channels within the same favourites list.
7Repeat steps 1 to 3 if you would like to change channels in a different favourites list.
4Exit the current favourites list with »« (blue).
–The entire programe table will appear again.
5 Quit the program table with »MENU«.
Enter own names for the favourites lists (max. 6 characters)
You can enter own names for all favourites lists.
1In the »PROGRAM TABLE« menu, switch over to the list view with »● ● ●« (yellow).
2Select the desired favourites list with »1« till »4«.
– The Favorite Name screen is displayed.
3Delete the „old“ name (FAV1), for this purpose select with »V«, »Λ«, »<« and »>« the push button »<« and delete the character with »OK«.
4Select the required character/numeric with »V«, »Λ«, »<« and »>« and confirm with »OK«.
Repeat the procedure for further characters/ numerics.
–Select »ABC« for uppercase and »abc« for lower case and confirm with »OK«.
–Select »?@123« for numbers and symbols and confirm with »OK«.
5Confirm the new name, select the push
button »Submit« with »V«, »Λ«, »<« or »>« and confirm with »OK«.
6 Press »MENU« to end the seting.
20 ENGLISH
SEttINGS-----------------------------------------------------------------------------------------------------------------------------------------
picturesettings
1 Open the menu with »mENu«.
2Select the menu item »PICTURE SETTINGS« with »v« or »Λ« and press »oK« to confirm.
– The »PICTURE SETTINGS« menu appears.
|
|
|
20.09.2010 |
|
PICTURE SETTINGS |
15:46 |
|
|
|
||
|
Basic Tuning |
|
|
|
Picture Mode |
User |
|
|
Brightness |
50 |
|
|
Contrast |
100 |
|
|
|
||
|
Sharpness |
75 |
|
|
Colour |
65 |
|
|
Colour Temperature |
Medium |
Advanced Tuning
Exit
Back
3Select the line »Picture Mode«, »Brightness«, »Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »v« or »Λ«. Select the value with »<« or »>« and press »oK« to confirm.
Notes:
7When changing the values with »<« or »>«, the screen will be split. You can see the current picture value on the left side, the new setting on the right side.
7In the »PICTURE SETTINGS« menu you can also find other additional settings.
4Select the line »DNR«, »Mpeg NR«, »Vibrant Colour«, »Perfect Clear«, »Film Mode«, »Gamma«, »Dynamic Contrast«, »Dynamic Backlight«, »Backlight« or »MEMC« with
»v« or »Λ«.
Select the value with »<« or »>« and press »oK« to confirm.
Notes:
7You can only select the »Mpeg NR« function on digital and AV presets.
»Mpeg NR« reduces any interference from artefacts (pixel blocks) from digital programmes due to MPEG compression (such as from DVB-T receivers or DVD players).
7The »Film Mode« detects and processes feature films automatically for all channel sources. This means you will always receive an optimal picture.
This functions in the modi 480i, 576i and 1080i in TV playback and for other channel sources.
If the »Film mode« is switched on for programmes without a feature film signal, minor problems such as picture freeze, defective subtitles or fine lines in the picture could occur.
7The function »Dynamic Contrast« adapts the contrast dynamically and optimally for the respective picture content.
7With »Dynamic Backlight«, the device optimally adapts the background lighting to the picture content.
7The »Backlight« can only be set manually when the function »Dynamic Backlight« is deactivated.
7MEMC feature only appears in the menus of the products with 400 Hz PPR feature.
5 Press »mENu« to end the setting.
ENGLISH 21
SEttINGS-----------------------------------------------------------------------------------------------------------------------------------------
Soundsettings
1 Open the menu with »mENu«.
2Select the menu item »SOUND SETTINGS« with »v« or »Λ« and press »oK« to confirm.
– The »SOUND SETTINGS« menu appears.
|
|
20.09.2010 |
|
|
SOUND SETTINGS |
15:46 |
|
|
|
||
|
Volume |
10 |
|
|
Balance |
|
|
|
|
|
|
|
|
|
|
|
Sound Mode |
SRS SSHD |
|
|
Sound Type |
Stereo |
|
|
SRS Sound Preset |
Speech |
|
|
Night Mode |
Off |
|
|
External |
|
|
|
Headphone |
20 |
|
|
|
||
|
Audio Output Setup |
|
|
|
End |
|
|
|
Back |
|
|
Note:
7Additional operations are explained in the following sections.
volume
1Select the line »Volume« with »v« or »Λ« and change the setting with »<« or »>«.
Balance
1Select the line »Balance« with »v« or »Λ« and change the setting with »<« or »>«.
Automaticvolume
Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels.
1Select the line »AVL« with »v« or »Λ« and select the option »On« with »<« or »>«.
Note:
7If the »SRS SSHD« setting has been selected in the »Audio Mode« line, the AVL line cannot be selected.
Stereo/twochannelsound,mono
If the device receives two-channel-sound programmes, e.g. a film with the original soundtrack on audio channel B (display: »Dual II«) and the dubbed version on sound channel A (display: »Dual I«), you can select the audio channel you prefer.
If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo sound quality is poor.
1Select the line »Audio Type« with »v« or »Λ« and adjust the setting with »<« or »>«.
Nightmode
Night Mode prevents fluctuations and sudden increases in volume.
1Select the line »Night Mode« with »v« or »Λ«.
2Activate ( »On«) or deactivate the night mode by pressing »<« or »>«.
Note:
7»Night Mode« appears in menu if »SRS SSHD« has been selected in »Sound Mode«.
22 ENGLISH
Settings------------------------------------------------------------------------------------------------------------------------------------------
Stereo width
This broadens the sound output for stereo programmes and improves the sound with mono reception.
1Select the line »Audio Mode« with »V« or »Λ«.
2 Select the option »Spatial« with »<« or »>«.
Soundeffects
This menu offers three preset sound effects (Music, Natural and Speech) and one setting to be created by you (User).
1Select the line »Sound Preset« with »V« or »Λ«.
2Select the sound effect »Music«, »Natural« or »Speech« by pressing »<« or »>«.
Note:
7»User« option is active when »Sound mode« setting is selected as »Normal or »Spatial«.
SRS StudioSound HD
SRS StudioSound HD is a patented audio technology which is integrated into the television set and only requires the built-in speakers to generate a Surround Sound effect.
1Select the line »Sound Mode« with »V« or »Λ«.
2Select the option »SRS SSHD« with »<« or »>«.
3Select the line »SRS Sound Preset« with »V« or »Λ«.
4Select the sound effect »Music«, »Movie«, »Natural« or »Speech« with »<« or »>«.
Equalizer
Equalizer offers a sound setting ”User” that you can create.
Equaliser appears in the menu when »Sound mode« is selected as »Spatial« or »Normal«, and »Sound Medium« as »User«.
1Select »Equalizer« with »V« or »Λ« and press »OK« to confirm.
The »EqualiZer« menu appears.
Note:
7If the »SRS SSHD« setting has been selected in the »Sound Mode« line, the »Equalizer« line will not indicate.
2Select the frequency bandwidth »120Hz«
with »V« or »Λ«.
Set the preferred value with »<« or »>«.
3Set the next frequency bandwidth with »V« or »Λ« and repeat the setting.
4 Press »<« to save the setting.
Audio description (Audio subtitles)
Audio description is an additional audio channel for visually-impaired persons. Descriptions are provided of activities, surroundings, changes of scene, gestures and actors' facial expressions.
This audio channel is transmitted simultaneously with the normal sound on digital channels. Availability depends on the respective channel and broadcaster.
1Select the line »Audio Description« with »V« or »Λ« and select the option »On« with »<« or »>«.
2Select the line »Volume« with »V« or »Λ« and change the volume with »<« or »>«.
Exiting the setting
1 Press »MENU« to end the setting.
*Under licence from SRS Labs, Inc. StudioSound HD,
SRS and the symbol are trademarks of SRS Labs, Inc.
ENGLISH 23
Television - OPERATION--------------------------------------------------------------------------------
Basic functions
Switching on and off
1Switch the television to standby with the power switch »ON • OFF«.
2Press »8«, »1…0« or »P+« or »P-« to switch on the television from standby mode.
3 Press »8« to switch the television to standby.
Selecting channels
1 Press »1…0« to select presets directly.
2Select channels step by step with »P+« or »P-«.
3Open the channel list with »OK«, select the
preferred television channel with »V«, »Λ«, »<« or »>« and press »OK« to confirm. Exit the channel list with »MENU«.
Selecting channels from lists
You can select channels from various lists (e.g. all channels, FAV 1 to FAV 4).
1Press »FAV« to open an overview of programe tables.
– The overview is displayed.
2Select a channel list with »Λ« or »V« and open it with »OK«.
3Select a television channel with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
4 Press »MENU« to exit the channel list.
Selecting a preset AV channel
1 Open the »Select Source« menu with »«.
2Select an AV preset with »V«, »Λ«, »<« or »>« and press »OK« to confirm.
3Use »1…0« to switch back to the television channel.
Adjusting the volume
1 Adjust the volume with »+ O –«.
Switching sound on/off
1Press »P« to mute the sound or switch it on again.
Displaying information
1Display information, press »?« repeatedly.
–The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can “freeze” the frame of the current programme.
1 Activate the freeze-frame function with »$«. 2 End the freeze-frame function with »$«.
Picture settings
Various picture settings are available.
1 Open the Tools menu with »TOOLS«.
2Select the menu item »Picture Mode« with »V« or »Λ«.
3Select »User«, »Eco TV«, »Vivid«, »Natural«,
»Movie«, »Sports« or »Game« by pressing »<« or »>«.
–You can change the »User« picture setting; see “Picture settings” on page 21.
Note:
7Picture setting »Game« can only be selected in »HDMI«, »Component« and »PC« modes.
24 ENGLISH
Television - OPERATION--------------------------------------------------------------------------------
Audio settings
Various audio settings are available.
1 Open the Tools menu with »TOOLS«.
2Select the menu item »Sound Preset« with »V« or »Λ«.
3Select the audio setting »User«, »Music«, »Natural« or »Speech« by pressing »<« or »>You«. can change the »User« audio setting–
– see the “Soundeffects” chapter on page 23.
Note:
7»User« option is active when »Sound mode« setting is selected as »Normal or »Spatial«.
Audio language
Various languages are available on digital television channels. This depends on the programme being broadcast.
1 Open the selection menu with »«.
Zoom function
This function allows you to enlarge the picture as required.
1 Open the Tools menu with »TOOLS«.
2Select the menu item »Zoom« with »V« or »Λ«.
3Press »OK« repeatedly to enlarge the display in three steps.
Eco mode
This function allows you to reduce the power consumption.
1 Open the Tools menu with »TOOLS«.
2Select the menu item »Eco TV« with »V« or »Λ«.
3 Switch on the Eco mode with »<« or »>«.
4 Switch the Eco mode off again with »<« or
2 Select the language by pressing »V« or »Λ« and press »OK« to confirm.
Subtitles
Various subtitles are available on digital television channels. This depends on the programme being broadcast.
1 Open the selection menu with »«.
2 Select the subtitles with »V« or »Λ« and press »OK« to confirm.
25