Groen TDB-20 TA-2 User Manual

COOKER/MIXERS

PROJECT NAME:

LOCATION:

ITEM NO:

TABLE TOP TWIN SHAFT AGITATOR ELECTRIC MODEL TDB

Cooker/Mixer shall be a Groen Model TDB-20 or 40/TA/2 quart (specify 20 or 40) stainless steel, selfcontained, steam jacketed unit operating from an electric heated steam source contained within unit and complete with manual tilt out twin shaft agitator per Bulletin 140850 and as follows:

AVAILABLE MODELS:

TDB-20 TA/2 (20 QUART) TDB-40 TA/2 (40 QUART)

CONSTRUCTION: Kettle interior shall be of 316

stainless steel, solid one-piece welded construction. Kettle jacket shall be of type 304 stainless steel, solid one piece construction. The console and all exposed surfaces shall be stainless steel. Unit shall be furnished with a heavy reinforced rim with a butterfly shaped pouring lip for maximum sanitation and durability. Right or left hand tilt handle, double panty faucet is standard and mounted on rear of electrical control box. Etch markings for measuring quantity of fill shall be provided.

FINISH: Interior of kettle shall be polished to a 180

emery grit finish. Exterior of kettle shall be finished to a bright semi-deluxe finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.

AGITATOR ASSEMBLY: Agitator shall be twin

shaft with variable speed drive and 1/2 horsepower motor. Motor drive, gears and electrical components shall be contained in a stainless steel housing. Twin agitator manually tilts out of kettle.. Primary agitator continuously scrapes the kettle walls while the secondary mixer is a counter rotating high speed agitator.

ASME CODE & UL LISTING: Unit shall be

ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Kettle is UL listed.

SANITATION: Unit shall be designed and

constructed to meet NSF requirements, and be NSF listed.

SELF CONTAINED STEAM SOURCE: Kettle

shall have an electrically heated self-contained steam source to provide kettle temperatures of 150°F to 298°F.

20 quart models will have 6 or 8 kw input and the 40 quart model 12 or 14 kw input, depending on supply voltage. Unit shall be factory charged with chemically pure water and rust inhibitors to ensure long life and minimum maintenance.

CONTROLS: Controls shall include a thermostat,

built in contactor, pressure gauge, front mounted water sight glass, and heating indicator lamp, and agitator on-off and variable speed control switch.

SAFETY FEATURES: Kettle shall have safety

tilt cut-off (cuts off heat when tilted to 12°F and above), pressure relief valve, high limit pressure switch and low water cut off, 24V control system, and agitator safety tilt cut off.

PERFORMANCE FEATURES: Unit shall

be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature falls below desired setting. Design shall make it possible for one person to tilt kettle, even when kettle is filled to capacity. Agitator speed can be controlled to meet the mixing requirements of the product being blended. Doublepantry hot & cold faucet allows operator to add hot or cold water while cooking or cleaning. Acid-etched fill gallonage markings make it easy to measure food product amounts.

INSTALLATION REQUIREMENTS:

Self-contained unit only requires two electrical connections: 115 Volt, single phase, 60 cycle connection for agitator and standard 208 Volt, three phase (field convertible to single phase). 50 or 60 cycles for kettle. (240 and 480 volts available through optional products.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

Stainless Steel Steam Jacketed Cooker/Mixer, Table Top Mounted, Tilting, Self-Contained, Electric Heated, 20 and 40-Quart Capacities With Twin Shaft Agitator. (Model TDB20, TA/2 shown).

OPTIONS/ACCESSORIES:

Basket inserts Lift off cover Holder for lift off cover 480V single or 3-phase supply

for kettle only

Stand mounting (Model TS/9

stainless steel stand

available) Kettle brush kit 3/4 horsepower agitator motor

Cooker/Mixers

140850 RevB

Revised 04/12

TDB

FRONT VIEW

P/N 140070 REV

RIGHT SIDE VIEW

30 1/2 [775]

2 [51] TYP (4) PLCS

6035

AMPS

TDB-40TDB-20

10.8

AMPS

6.3

PHASE

208

VOLTS

KETTLE MODEL

ELECTRICAL REQUIREMENTS TABLE

MMINCHES

632

838

109

1306

4.3

51.4

24.9

TDB-40, TA/2

587

769

1080

140

TABLE OF DIMENSIONS

INCHES MM

30.3

5.5

23.1

42.5

MODEL TDB-20, TA/2

DIM

14.4

8.4

240

1035

40.8

927

36.5

2014.4128.43400

470

18.5

394

15.5

GDF

440 3 5.3 71410.1

25.1 63856722.3

12.06.3480

11.05.8 8

3 815

460 3

MAIN DIMENSIONS ARE IN INCHES. DIMENSIONS IN BRACKETS [ ] ARE MM.

72" CORD & PLUG FURNISHED FOR 115V AGITATOR CONNECTION

ELECTRICAL SUPPLY: 3/4" WATER RESISTANT CONDUIT FURNISHED (1" FOR 240V, 1 PHASE NOT FURNISHED)

SERVICE CONNECTIONS AND NOTES:

1/2 HP VARIABLE SPEED DRIVE: PRIMARY 0-79 RPM, SECONDARY 0-318 RPM

ALL UNITS ARE SHIPPED 208/3/60 OR 480/3/60. UNIT CONVERTED TO SUPPLY VOLAGE AT INSTALLATION.

WALL

(2) 1/2" MALE NPT CONNECTIONS FOR HOT AND COLD WATER.

AGITATOR HOSING

IN THE UP POSITION

CONNECTION

WATER RESISTANT

ELECTRICAL SUPPLY

POWER CORD

FOR AGITATOR

191

7.5

3.5

P/N 140070 REV D

1 1/2 [38]2 3/4 [70]

MIN POUR PATH

CLEARANCE

REAR WALL

MINIMUM

1 [25]

MAX POUR PATH

27 1/2 [698]

TOP VIEW

(1 AMP)

115V/1/60

POWER CORD

AND PRESSURE GAUGE

WATER FILL ASSEMBLY

SAFETY RELIEF VALVE

DOUBLE PANTRY

FAUCET

3 9/16 [91]

KETTLE IN

POUR PATH

TILT POSITION

1 1/8 [29]

3/8"-16 UNC THREADED COUPLINGS

UNDERNEATH BASE (QTY 4)

7/8 [22]

TYP (4) PLCS

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, uniﬁedbrands.net