Groen TDA-1-40 User Manual

Table Top Kettles

Description

Kettle shall be Groen Model TDA/1-40 quart stainless steel, 2/3 steam jacketed unit operating from direct steam. per Bulletin 141044 and as follows:

Construction

Kettle proper shall be of 304 stainless steel, solid one piece welded construction. Support arms are heavy chrome plated steel tubing. Rim shall be reinforced with a welded butterfly shaped pouring lip, for pouring control and durability. Kettle shall have a right side handle for controlled pouring of kettle contents, and rear leg which stops kettle in upright position.

Finish

Interior of kettle shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.

model TDA/1-40

Stainless Steel 2/3 Steam Jacketed Kettle

Table Top mounted Tilting Direct Steam Heated 40-Quart Capacity

Short Form

Groen Model TDA/1-40 quart capacity stainless steel, table top direct steam jacketed kettle per Bulletin 141044. Unit shall have full bottom hemisphere steam jacket with one piece welded construction of Type 304 stainless steel, and sturdy tubular support arms. Reinforced bar rim, with butterfly shaped pouring lip standard. Right side handle for controlled pouring of kettle contents. NSF listed, ASME code constructed and National Board registered. Operates dependably from 5 up to 55 PSI maximum. Integrated steam control valve standard. Steam and condensate connections required. Made in USA.

ASME Code

Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 55 PSI.

Sanitation

Unit shall be designed and constructed to meet NSF requirements and be NSF listed.

Steam Pressure

Kettles shall operate dependably at any steam pressure between 5 and 55 PSI. Higher working pressure available.

Performance/Features

Handy support arm mounted steam control valve eliminates counter or table top mounted control valves.

Mounting

Kettle shall be mounted on sturdy cast, chrome plated stainless steel arms. The steam supply shall enter through the left kettle support arm, through an integrated steam control valve into the jacket at the rotary joint, down through the support arm. No exposed steam piping shall be on the kettle body.

Installation

Steam trap assembly is required and not provided unless ordered as an option. 3/8” IPS steam inlet and condensate outlet required. Safety valve and remote steam source required.

Options/Accessories

Steam trap assembly Basket insert Lift off cover 316 stainless steel interior

Related Products

T5C tables with kettles Cabinet base

Origin of Manufacture

Kettle shall be designed and manufactured in the United States.

Applications

Browning Meats Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Chili Stews

1055 Mendell Davis Drive, Jackson, MS 39272 888-994-7636, uniﬁedbrands.net

Please reference our website for the most updated product information and speciﬁcations.

Groen Table Top Kettles, Page 8

160186B

Revised 08/09

P/N 141044 (REV A)

Model TDA/1-40

P/N 141044 REV A

WALL

5 3/4

4 1/2

TILTED

(114)

(64)

2 1/2

POSITION

8 3/8

(208)

17 1/2

(445)

MINIMUM REAR CLEARANCE

(406)

MAXIMUM

NOTES:

1. DIMENSIONS ARE IN INCHES; BRACKETS() ARE IN MM.

ÿ16

(406)

16 3/4

(425)

PATH

POUR

(762)

30 15/16

(360)

14 3/16

2.88

(41)

1.63

(73)

3/8 IPS STEAM

INLET

3/8 IPS STEAM

OUTLET

1 5/16

(289)

11 3/8

(33)

(578)

(679)

22 3/4

26-3/4

19-3/4

(502)

(102)

VALVE HANDLE

STEAM CONTROL

8-3/16

(208)

14-1/2

(368)

22 3/8

(568)

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, uniﬁedbrands.net

© 2009 Uniﬁed Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered trademarks in the United States [and various other countries] of Uniﬁed Brands, a wholly-owned subsidiary of Dover Corporation.